QMA Male Right Angle Connector Crimp/ Solder Attachment For RG316-DS TECHNICAL DATA SHEET PE44505 QMA Male Right Angle Connector Crimp/Solder Attachment For RG316-DS Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style QMA Male RG316-DS Crimp/Solder Right Angle Electrical Specifications Frequency Range, GHz Impedance, Ohms Maximum Operating Voltage, Volts Dielectric Withstanding Voltage, Vrms DC to 18 50 350 750 Frequency 1 Frequency, GHz DC to 3 VSWR1.11:1 Return Loss, dB 26 Insertion Loss, dB 0.086 Frequency 2 Frequency, GHz 3 to 4 VSWR1.13:1 Return Loss, dB 24 Insertion Loss, dB 0.1 Frequency 3 Frequency, GHz 4 to 6 VSWR1.29:1 Return Loss, dB 18 Insertion Loss, dB 0.12 Mechanical Specifications Temperature Operating Range, deg C Storage Range, deg C -40 to +85 -40 to +85 Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.63 [16] 0.41 [10] 0.71 [18.03] Weight, lbs [g] 0.006 [2.72] . Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: QMA Male Right Angle Connector Crimp/Solder Attachment For RG316-DS PE44505 PE44505 REV 1 QMA Male Right Angle Connector Crimp/ Solder Attachment For RG316-DS TECHNICAL DATA SHEET PE44505 Connector Type Contact Material and Plating Body Material and Plating Dielectric Type QMA Male Brass, Gold Brass, Tri-Metal PTFE Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level QMA Male Right Angle Connector Crimp/Solder Attachment For RG316-DS from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: QMA Male Right Angle Connector Crimp/Solder Attachment For RG316-DS PE44505 URL: http://www.pasternack.com/qma-male-standard-rg316-ds-connector-pe44505-p.aspx PE44505 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE44505 REV FERRULE: 3.25 CRIMP TOOL CRIMP SIZE REQUIRED 3. CRIMP FERRULE & PRESS CAP DOWN. 2. INSTALL CABLE INTO BODY OF CONNECTOR AND SOFT SOLDER CENTER CONDUCTOR IN PLACE. 1. STRIP CABLE AS SHOWN & SLIDE FERRULE OVER CABLE. ASSEMBLY PROCEDURES REV. A CAD FILE 090711-A SCALE N/A SIZE A 2231 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE44505 DWG TITLE QMA Male Right Angle Connector Crimp/Solder Attachment For RG316-DS PE44505 CAD Drawing 3