RP SMA Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 TECHNICAL DATA SHEET PE4781 RP SMA Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style SMA Male Reverse Polarity RG55,RG141,RG142,RG223,RG400 Crimp/Solder Right Angle Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 0.61 [15.49] 0.312 [8] 0.925 [23.5] Weight, lbs [g] 0.013 [5.9] Connector Type Contact Material and Plating Coupling Nut Material and Plating Hex Size, in Torque, in-lbs [Nm] Body Material and Plating Dielectric Type SMA Male Reverse Polarity Gold Brass, Nickel 5/16 5 [0.57] Brass, Nickel PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: RP SMA Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 PE4781 PE4781 REV 1 RP SMA Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 TECHNICAL DATA SHEET PE4781 RP SMA Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: RP SMA Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 PE4781 URL: http://www.pasternack.com/sma-male-reverse-polarity-rg55-rg141-rg142-rg223-rg400-connector-pe4781-p.aspx PE4781 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE4781 REV REV. A FSCM NO. 53919 FERRULE: .213" HEX CRIMP TOOL CRIMP SIZE REQUIRED 3. CRIMP FERRULE & PRESS CAP DOWN. 2. INSTALL CABLE INTO BODY OF CONNECTOR & SOFT SOLDER CENTER CONDUCTOR IN PLACE. 1. STRIP CABLE AS SHOWN. SLIDE FERRULE OVER CABLE. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4781 DWG TITLE CAD FILE 060702 SCALE N/A SIZE A 127 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. RP SMA Male Right Angle Connector Crimp/Solder Attachment For RG55, RG141, RG142, RG223, RG400 PE4781 CAD Drawing 3