75 Ohm BNC Male Right Angle Connector Crimp/ Solder Attachment For RG179, RG187 TECHNICAL DATA SHEET PE4610 75 Ohm BNC Male Right Angle Connector Crimp/Solder Attachment For RG179, RG187 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style BNC Male RG179,RG187 Crimp/Solder Right Angle Electrical Specifications Frequency Range, MHz Impedance, Ohms Maximum Operating Voltage, Volts Dielectric Withstanding Voltage, Vrms DC to 1,000 75 500 1,000 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 1.064 [27.03] 0.57 [14.48] 1.748 [44.4] Weight, lbs [g] 0.061 [27.67] Connector Type Contact Material and Plating Contact Plating Specification Coupling Nut Material and Plating Coupling Nut Plating Specification Body Material and Plating Body Plating Specification Dielectric Type BNC Male Brass, Gold 30µ in. minimum Brass, Nickel 100µ in. minimum Brass, Nickel 100µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm BNC Male Right Angle Connector Crimp/Solder Attachment For RG179, RG187 PE4610 PE4610 REV 1 75 Ohm BNC Male Right Angle Connector Crimp/ Solder Attachment For RG179, RG187 TECHNICAL DATA SHEET PE4610 Plotted and Other Data Notes: Values at 25 °C, sea level 75 Ohm BNC Male Right Angle Connector Crimp/Solder Attachment For RG179, RG187 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm BNC Male Right Angle Connector Crimp/Solder Attachment For RG179, RG187 PE4610 URL: http://www.pasternack.com/bnc-male-standard-rg179-rg187-connector-pe4610-p.aspx PE4610 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE4610 REV CONTACT: .068" HEX CRIMP TOOL FERRULE: .178" HEX CRIMP TOOL CRIMP SIZE REQUIRED 4. INSTALL CABLE ASSEMBLY INTO BODY SO THAT THE INNER FERRULE PORTION OF BODY SLIDES UNDER BRAID. PUSH CABLE ASSEMBLY FORWARD UNTIL CONTACT SNAPS INTO PLACE. SLIDE FERRULE OVER BRAID AND UP AGAINST CONNECTOR BODY & CRIMP. 3. THE CONTACT (4) SHOULD BUTT . AGAINST THE DIELECTRIC & PTFE SPACER. CRIMP CONTACT TO CABLE CENTER CONDUCTOR 2. FLARE END OF CABLE BRAID & SLIDE METAL SPACER (2) & PTFE (3) SPACER OVER CABLE DIELECTRIC 1. STRIP CABLE AS SHOWN & SLIDE FERRULE (1) ONTO CABLE. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4610 DWG TITLE CAD FILE 052402 SCALE N/A SIZE A XXXX NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 75 Ohm BNC Male Right Angle Connector Crimp/Solder Attachment For RG179, RG187 PE4610 CAD Drawing 3