75 Ohm N Male Connector Crimp/Solder Attachment For RG6 TECHNICAL DATA SHEET PE4508 75 Ohm N Male Connector Crimp/Solder Attachment For RG6 Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style N Male RG6 Crimp/Solder Straight Electrical Specifications Frequency Range, GHz Impedance, Ohms Maximum VSWR Maximum Operating Voltage, Volts Dielectric Withstanding Voltage, Vrms DC to 1.5 75 1.3:1 1,000 2,500 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] 1.325 [33.66] 0.8 [20] Weight, lbs [g] 0.068 [30.84] Connector Type Contact Material and Plating Contact Plating Specification Coupling Nut Material and Plating Coupling Nut Plating Specification Body Material and Plating Body Plating Specification Dielectric Type N Male Brass, Gold 30µ in. minimum Brass, Nickel 100µ in. minimum Brass, Nickel 100µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Plotted and Other Data Notes: Values at 25 °C, sea level Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm N Male Connector Crimp/Solder Attachment For RG6 PE4508 PE4508 REV 1 75 Ohm N Male Connector Crimp/Solder Attachment For RG6 TECHNICAL DATA SHEET PE4508 75 Ohm N Male Connector Crimp/Solder Attachment For RG6 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 75 Ohm N Male Connector Crimp/Solder Attachment For RG6 PE4508 URL: http://www.pasternack.com/n-male-standard-rg6-connector-pe4508-p.aspx PE4508 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE4508 REV CONTACT: .068" HEX CRIMP TOOL FERRULE: .324" HEX CRIMP TOOL CRIMP SIZE REQUIRED FSCM NO. 53919 PE4508 DWG TITLE CAD FILE 052002 SCALE N/A SIZE A XXXX NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 75 Ohm N Male Connector Crimp/Solder Attachment For RG6 PE4508 CAD Drawing 3