SMA Male Connector Crimp/Solder (Captive Contact) Attachment for RG174, RG316, RG188 TECHNICAL DATA SHEET PE4589 Configuration Connector Connector Specification Connector Interface Type Attachment Method (Shield/Contact) Body Style SMA Male MIL-STD-348A RG174, RG316, RG188 Crimp/Solder (Captive Contact) Straight Electrical Specifications Frequency Range Impedance Maximum VSWR Maximum Operating Voltage DC to 3 GHz 50 Ohms 1.3:1 335 Volts Mechanical Specifications Temperature Operating Range -65 to +165 deg C Size Length Width/Dia. 1.06 in [26.92 mm] 0.312 in [7.92 mm] Weight 0.013 lbs [5.9 g] Connector Type Contact Material and Plating Contact Plating Specification Coupling Nut Material and Plating Coupling Nut Plating Specification Hex Size Torque Body Material and Plating Body Plating Specification Dielectric Type SMA Male Brass, Gold 50µ in. minimum Brass, Nickel 100µ in. minimum 5/16 in. 5 in-lbs [0.57 Nm] Brass, Nickel 100µ in. minimum Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant REACH Compliant 06/18/2012 Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male Connector Crimp/Solder (Captive Contact) Attachment for RG174, RG316, RG188 PE4589 PE4589 REV 1.2 1 SMA Male Connector Crimp/Solder (Captive Contact) Attachment for RG174, RG316, RG188 TECHNICAL DATA SHEET PE4589 Plotted and Other Data Notes: • Values at +25 °C, sea level SMA Male Connector Crimp/Solder (Captive Contact) Attachment for RG174, RG316, RG188 from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMA Male Connector Crimp/Solder (Captive Contact) Attachment for RG174, RG316, RG188 PE4589 URL: http://www.pasternack.com/sma-male-standard-rg174-rg316-rg188-connector-pe4589-p.aspx PE4589 REV 1.2 2 © 2014 Pasternack Enterprises All Rights Reserved PE4589 REV 1.2 SLIDE FERRULE (1) & CLAMP NUT (2) OVER CABLE. FLAIR BRAID & SLIDE WEDGE ASSEMBLY (3) UNDER BRAID WITH CENTER CONDUCTOR PROTRUDING THROUGH HOLE IN INSULATOR. SLIDE FERRULE (1) OVER BRAID & AGAINST CLAMP NUT. CRIMP FERRULE (1) SOLDER CONTAC TO CENTER CONDUCTOR. CLEAN. INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. 2. 3. CONTACT: SOLDER FERRULE: .128" HEX CRIMP TOOL CRIMP SIZE REQUIRED STRIP CABLE AS SHOWN. SO NOT NICK THE CENTER CONDUCTOR. TIN CENTER CONDUCTOR. 1. ASSEMBLY PROCEDURES FSCM NO. 53919 PE4589 DWG TITLE CAD FILE 120804 SCALE N/A SIZE A XXXX NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. SMA Male Connector Crimp/Solder (Captive Contact) Attachment for RG174, RG316, RG188 PE4589 CAD Drawing 3