RM300DY1-24S Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 Super Fast Recovery Dual Diode Module 300 Amperes/1200 Volts TC MEASURED POINT (BASEPLATE) A F W F X G G2 T B E N L (4 PLACES) E2 H E1 G G1 C2E1 E2 C1 K K K M (3 PLACES) P U D Q P Description: Powerex Super Fast Recovery Dual Diode Modules are designed for use in applications requiring fast switching. The modules are isolated for easy mounting with other components on common heatsinks. Q P S C V R C1 Features: £ Isolated Mounting £ Planar Chips C2E1 Applications: £ Inverters £ Choppers £ Switching Power Supplies £ Free-Wheeling E2 Outline Drawing and Circuit Diagram Dimensions Inches Millimeters Dimensions Inches Millimeters A 4.25 108.0 N 1.18 30.0 B 2.44 62.0 P 0.71 18.0 30.0+1.0/-0.5 Q 0.28 7.0 D 3.66±0.01 93.0±0.25 R 0.87 22.2 E 1.89±0.01 48.0±0.25 S 0.33 8.5 F 0.98 25.0 T 0.02 0.5 G 0.24 6.0 U 0.110 2.8 H 0.59 15.0 V 0.16 4.0 K 0.55 14.0 W 0.85 21.5 L 0.26 Dia. 6.5 Dia. X 0.94 24.0 M M6 Metric M6 C 01/07 1.18+0.04/-0.02 Ordering Information: Select the complete ten digit module part number you desire from the table below. Example: RM300DY1-24S is a 1200V, 300 Ampere, Super Fast Recovery Dual Diode Module. Type Current Rating Amperes VCES Volts (x 100) RM 300 12 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 RM300DY1-24S Super Fast Recovery Dual Diode Module 300 Amperes/1200 Volts Absolute Maximum Ratings, Tj = 25 °C unless otherwise specified Ratings Symbol RM300DY1-24S Units Tj –40 to 150 °C Storage Temperature Tstg –40 to 125 °C Repetitive Peak Reverse Voltage Vrrm 1200 Volts Junction Temperature Non-repetitive Peak Reverse Voltage Vrsm 1200 Volts Vr(DC) 960 Volts Forward Current IDC 300 Amperes Mounting Torque, M6 Main Terminal — 40 in-lb Mounting Torque, M6 Mounting — 40 in-lb Weight — 400 Grams VISO 2500 Volts DC Reverse Voltage Isolation Voltage (Main Terminal to Baseplate, AC 1 min.) . Static Electrical Characteristics, Tj = 25 °C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Repetitive Peak Reverse Current Irrm Vrm = Vrrm, Tj = 150°C — — 10 mA Forward Voltage Drop VFM IFM = 300A, tw ≤1ms, Tj = 25°C — — 3.5 Volts trr VCC = 600V, IF = 300A, Tj = 25°C, — — 250 ns — 13 — µC — — 0.12 °C/W — 0.04 — °C/W Reverse Recovery Time Reverse Recovery Charge dlF/dt = -6000A/µs, Qrr VGE1 = VGE2 = 15V, RG = 1Ω Thermal Resistance, Junction to Case Inductive Load Switching Rth(j-c) Per IGBT 1/2 Module Contact Thermal Resistance, Case to Fin* TC and Tf Measured Just Under Chips Rth(c-f) Per 1/2 Module, Thermal Grease Applied TC and Tf Measured Just Under Chips *Typical value is measured by using Shin-Etsu Chemical Co., Ltd. "G746" EMITTER CURRENT, IE, (AMPERES) 103 Tj = 25°C Tj = 125°C 100 10-3 10-2 10-1 100 102 10-2 0 1 2 3 4 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) 5 10-3 101 10-1 10-1 101 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') Zth = Rth • (NORMALIZED VALUE) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) Single Pulse TC = 25°C Per Unit Base = Rth(j-c) = 0.12°C/W 10-2 10-5 10-4 10-3 10-3 TIME, (s) 01/07