SF2166E • • SAW Filter for Digital Television Complies with Directive 2002/95/EC (RoHS) 1280.18 MHz SAW Filter Pb Characteristics: Balance-to-balanced operation Terminating source/load impedance : ZS = 150 Ω Maximum Rating Rating Value Units +10 dBm Input Power Level DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range -50 to +95 °C 265 °C Maximum Soldering Profile, 5 cycles/ 10 seconds maximum SM3030-8 Electrical Characteristics Characteristic Sym Center Frequency fC Notes Min 1280.18 Typ Max Units Insertion Loss, 1260.18 to 1300.18 MHz IL 3.2 4.5 Amplitude Ripple, 1260.18 to 1300.18 MHz 1.0 2.3 dB Group Delay Ripple, 1260.18 to 1300.18 MHz 20 30 nsP-P MHz dB Attenuation, 0 dB Reference: 100 to 1198.12 MHz 47 50 1362.24 to 2000 MHz 45 55 2000 to 6000 MHz 30 40 Case Style SM3030-8 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity dB 858, YWWS Reel Size 7 inch 500 Pieces/Reel Reel Size 13 inch 3000 Pieces/Reel Tuning Network, 150 ohm Balanced Source/Load Notes: 1. US and international patents may apply. 2. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. 3. Electrostatic Sensitive Device. Observe precautions for handling. www.RFM.com E-mail: [email protected] © 2009-2011 by RF Monolithics, Inc. Page 1 of 5 SF2166E - 4/28/11 Filter S21, S11 and S22 Plots Filter Shape Factor Plot www.RFM.com E-mail: [email protected] © 2009-2011 by RF Monolithics, Inc. Page 2 of 5 SF2166E - 4/28/11 Filter Passband Plot Filter Group Delay Plot www.RFM.com E-mail: [email protected] © 2009-2011 by RF Monolithics, Inc. Page 3 of 5 SF2166E - 4/28/11 8-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension J J I J K N I A B C D E F G H I J K L M N O L M N mm Nom 3.0 3.0 1.27 0.92 0.75 0.60 0.60 1.20 3.19 0.81 0.96 0.81 1.39 0.23 0.38 Min 2.87 2.87 1.14 0.79 0.62 0.47 0.47 1.07 - Max 3.13 3.13 1.40 1.05 0.88 0.73 0.73 1.33 - Min 0.113 0.113 0.045 0.031 0.024 0.018 0.018 0.042 - Inches Nom 0.118 0.118 0.050 0.036 0.029 0.024 0.024 0.047 0.126 0.032 0.038 0.032 0.055 0.009 0.015 Max 0.123 0.123 0.055 0.041 0.034 0.029 0.029 0.052 - Case Materials Materials K O O Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View TOP VIEW BOTTOM VIEW 1 2 8 7 1 6 6 2 5 5 3 7 858 YWWS A E C B 8 3 H G 4 4 D www.RFM.com E-mail: [email protected] © 2009-2011 by RF Monolithics, Inc. F Page 4 of 5 SF2166E - 4/28/11 Tape and Reel Specifications "B" REF. 100 REF. “B” Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao Bo Ko Pitch W 2.0 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 3.35 mm 3.35 mm 1.40 mm 8.0 mm 12.0 mm Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] © 2009-2011 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 5 of 5 SF2166E - 4/28/11