SF2201E • Surface Mount 3.0 x 3.0 x 1.3 mm Package • Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Pb Value Units Input Power Level 15 dBm DC Voltage 5 V Operating Temperature Range -30 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C 916.45 MHz SAW Filter SM3030-6 Electrical Characteristics Characteristic Sym Notes Min Typ Center Frequency FC 916.45 Insertion Loss, 914.45 to 918.45 MHz IL 2.7 Amplitude Ripple, 914.45 to 918.45 MHz VSWR, 914.45 to 918.45 MHz Max Units MHz 3.5 dB 0.3 1.0 dBP-P 1.5:1 2.0:1 Attenuation Referenced to 0 dB DC to 600 MHz 50 57 600 to 840 MHz 40 51 869 to 894 MHz 35 46 970 to 1500 MHz 40 47 25 32 1500 to 3000 MHz Source Impedance ZS 50 Load Impedance ZL 50 Case Style Ω SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity dB 931, YWWS Reel Size 7 Inch 1000 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Input Terminals 5 Output 2 Ground All Others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. 7. 8. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc www.RFM.com E-mail: [email protected] ©2009 by RF Monolithics, Inc. Page 1 of 6 SF2201E - 12/2/09 Filter Passband Response Filter Test Circuit 5 0 o h m 5 SF2201E 2 5 0 o h m 1 , 3 , 4 , 6 www.RFM.com E-mail: [email protected] ©2009 by RF Monolithics, Inc. Page 2 of 6 SF2201E - 12/2/09 Filter Response, 816.45 to 1016.45 MHz Filter Broadband Response, 0.01 to 3000 MHz www.RFM.com E-mail: [email protected] ©2009 by RF Monolithics, Inc. Page 3 of 6 SF2201E - 12/2/09 Filter S11 Plot Filter S22 Plot www.RFM.com E-mail: [email protected] ©2009 by RF Monolithics, Inc. Page 4 of 6 SF2201E - 12/2/09 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free TOP VIEW BOTTOM VIEW B 1 3 6 931 YWWS A 2 5 E 4 D www.RFM.com E-mail: [email protected] ©2009 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 5 of 6 SF2201E - 12/2/09 Tape and Reel Specifications Quantity Per Reel millimeters 7 178 1000 13 330 3000 "B" REF. 100 REF. “B “ Inches See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions 2.0 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 Ao Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] ©2009 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 6 of 6 SF2201E - 12/2/09