SF2183E • Surface Mount 3.0 x 3.0 mm Package • Complies with Directive 2002/95/EC (RoHS) Pb 400.00 MHz SAW Filter Absolute Maximum Ratings Rating Value Units 10 dBm Input Power Level 6 V Operating Temperature Range DC Voltage on any Non-ground Terminal -40 to +85 °C Component Storage Temperature Range -40 to +125 °C Storage Temperature Range in Tape and Reel -40 to +85 °C 265 °C Maximum Soldering Profile, 5 cycles/ 10 seconds maximum SM3030-6 Electrical Characteristics Characteristic Sym Center Frequency Minimum Insertion Loss Notes Min Typ Max fC 400.00 ILMIN 3.0 4.0 0.7 3.0 Passband Attenuation Relative to ILMIN, 399.875 to 400.125 MHz Units MHz dB Stopband Attenuation Referenced to ILMIN: 10.0 to 370.0 MHz 50 56 370.0 to 390.0 MHz 42 46 390.0 to 398.8 MHz 22 25 401.0 to 409.0 MHz 10 22 409.0 to 414.0 MHz 30 40 414.0 to 800.0 MHz 42 50 800.0 to 2500.0 MHz 45 Input Impedance ZS Output Impedance ZL Case Style 55 865 Ω || 2 pF 865 Ω || 2 pF SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity dB 871, YWWS Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection 5 0 o h m Terminals Input 2 Output 5 Case Ground All others M a tc h in g N e tw o r k 1 6 O u tp u t 7 3 n H 7 3 n H 5 In p u t 2 6 .8 p F 6 .8 p F 4 3 S F 2 1 8 3 E (b o tto m v ie w ) CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. 7. 8. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." The design, manufacturing process, and specifications of this filter are subject to change. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 4 SF2183E - 7/19/10 SF2183E Wideband Response, 100 MHz Span SF2183E Passband Response, 4 MHz Span www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 2 of 4 SF2183E - 7/19/10 SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension A B C D E F G H I J K L M N O K L N K N Min 2.87 2.87 1.12 0.77 2.67 1.47 0.72 1.37 0.47 1.17 mm Nom 3.00 3.00 1.25 0.90 2.80 1.60 0.85 1.50 0.60 1.30 3.20 1.70 1.05 0.81 0.38 Max 3.13 3.13 1.38 1.03 2.93 1.73 0.98 1.63 0.73 1.43 Min 0.113 0.113 0.044 0.030 0.105 0.058 0.028 0.054 0.019 0.046 Inches Nom 0.118 0.118 0.049 0.035 0.110 0.063 0.033 0.059 0.024 0.051 0.126 0.067 0.041 0.032 0.015 Max 0.123 0.123 0.054 0.040 0.115 0.068 0.038 0.064 0.029 0.056 Case Materials O Materials N M M PCB Footprint Top View Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free TOP VIEW BOTTOM VIEW B 1 3 6 871 YWWS A 2 5 E 4 D www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. G C F H 6 1 5 2 4 3 I J Page 3 of 4 SF2183E - 7/19/10 Tape and Reel Specifications Quantity Per Reel 7 178 500 13 330 3000 "B" REF. 100 REF. Inches “B” millimeters See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions 2.0 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm 4.0 PIN #1 A 1.50 1.75 0.3 ± 0.05 Ao Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 4 of 4 SF2183E - 7/19/10