Preliminary XOC17 Series OCXOs • • • • • • Oven Controlled Crystal Oscillators Very High Frequency Accuracy and Stability with Fast Warm-up Low Power Consumption, Small Size Low Phase Noise and Jitter Fixed-tuned and Voltage-tunable Options Typical Applications Include: - Cellular Base Stations - Communication Test Equipment - Precision Frequency Synthesizers • Complies with Directive 2002/95/EC (RoHS) 5 to 100 MHz Frequency Range Pb Electrical Characteristics Characteristic Frequency Range (Each OCX0 is Single Frequency) Sym Notes Fo Initial Frequency Tolerance Options Warm-up Time to <10 ppb of 2 hour Warm-up Frequency (SC) Minimum Maximum Units 5.000000 100.000000 MHz 100 200 at 25 °C Typical ppb 10 minutes 0 to 70 °C Temperature Range Operation: Stability Options, 5 to 40 MHz using AT Crystal 5 Stability Options, 5 to 40 MHz using SC Crystal 4 50 20 Stability Options, 40 to 100 MHz using AT Crystal 10 100 Stability Options, 40 to 100 MHz using SC Crystal 4 50 Stability Options, 5 to 40 MHz using AT Crystal 5 50 Stability Options, 5 to 40 MHz using SC Crystal 4 50 Stability Options, 40 to 100 MHz using AT Crystal 10 100 Stability Options, 40 to 100 MHz using SC Crystal 4 50 ppb -20 to 70 °C Temperature Range Operation: ppb -40 to 85 °C Temperature Range Operation: Stability Options, 5 to 20 MHz using AT Crystal 10 50 Stability Options, 20 to 40 MHz using AT Crystal 10 100 Stability Options, 40 to 100 MHz using AT Crystal 20 100 ppb Output Waveform Options: Sinewave Output, 50 ohm Load harmonics -30 dBc, Non-harmonics -70 dBc HCMOS Output, 15 pF Load 40/60% duty cycle TTL Output, 5 TTL Load 40/60% duty cycle Power Supply Voltage Options, ±5% Tolerance VCC 3.30 5.00 12.00 V Optional Voltage Tuning Feature: Voltage Tuning Range for 3.3 V Power Supply Option 0 2.8 V Voltage Tuning Range for 5 and 12 V Power Supply Options 0 3.0 V Frequency Tuning Range and Linearity, AT Crystal 1 to 3 ppm, 10% to 20% Linearity Frequency Tuning Range and Linearity, SC Crystal 0.5 to 1 ppm, 10% Linearity Tuning Input Impedance 100K Tuning Voltage Reference Output Impedance Tuning Voltage Reference Output Current ohms 100 ohms 1 mA Operating Power: Within 2 minutes of Turn on 2.0 Steady State 0.9 www.RFM.com E-mail: [email protected] ©2009 by RF Monolithics, Inc. 2.5 W Page 1 of 2 XOC17 - 11/11/09 Electrical Characteristics Characteristic Sym Notes Minimum Typical Maximum AT Crystal 50 200 SC Crystal 20 50 Units Aging: ppb SSB Phase Noise, 10 MHz SC Crystal Option: @ 10 Hz offset -125 @ 100 Hz offset -135 @ 1 kHz offset -145 @ 10 and 100 kHz offset dBc/Hz -155 Lid Symbolization TBD // YWWS 5-Pin Seam Weld Case 25.8 x 25.8 x 12.7 mm Nominal Dimensions Pin Functions Pin Case Outline Drawing Connection 1 Oscillator Output 2 Case/Circuit Ground 2 2 5 5 . 8, 8 m a x 1 1 9 9 . ,0 0 5 5 ¡± À 0 0 . , 2 2 Tuning Voltage Input 4 Tuning Voltage Reference Output 5 Power Supply Voltage Input Application Circuit 4 3 2 5 ,. 8 m m a a x x 1 1 9 9 , . 0 0 5 5 ¡ À ± 0 0 , 2. 2 1 1 8 8 , . 4 4 ¡ À ± 0 0 , .2 2 3 P o w e r S u p p ly Bottom View 2 1 5 1 1 2 2 . , 1 1 ¡ ± À 0 ., 2 T u n in g V o lta g e In p u t 3 O v e n C o n tr o lle d C ry s ta l O s c illa to r 5 4 T u n V o lt R e fe r O u t in g a g e e n c e p u t 1 10 0. 0 ; t1o 2 1. 72 . 7 0 0 , 6 . 65 ¡ 5 À ± 0 , 0 2 . 2 2 1 6 6 . 2 , 2 ±¡ À 0 0 . , 2 2 O s c illa to r O u tp u t ø 0 .8 ± 0 .0 5 U n it:m m D im e n s io n s in m m CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. The design, manufacturing process, and specifications of this device are subject to change without notice. www.RFM.com E-mail: [email protected] ©2009 by RF Monolithics, Inc. Page 2 of 2 XOC17 - 11/11/09