Preliminary XVT9007 • • • • Voltage Controlled Temperature Compensated Crystal Oscillator Excellent Frequency Stability & Low Phase Noise 3.2 x 2.5 x 1.3 mm Surface-Mount Case Complies with Directive 2002/95/EC (RoHS) Pb 19.6608 MHz VCTCXO SM3225-4 Case Electrical Characteristics Characteristic Nominal Frequency Sym Notes Minimum Fo Typical Maximum 19.660800 Units MHz Storage Temperature -40 +85 °C Operating Temperature Range -20 +75 °C Power Supply Voltage Vcc 2.66 Output Voltage with Load 10 pF||10 KΩ Vout 0.8 2.8 Control Voltage Control Voltage Input Impedance V VP-P Output Wave form Power Supply Current 2.94 clipped sinewave Icc 2.0 Vcon 1.4±1.0 V 100K Frequency Tolerance, Vcontrol = 1.4 V (after Reflow) mA ohms ±2 ppm max @ 25 °C ±3 °C Frequency Stability versus: Temperature, -20 to 75 °C ±2.5 ppm Supply Voltage, 2.66 to 2.94 V ±0.2 ppm Load 10 pF||10 KΩ ±10% ±0.2 Control Voltage Frequency Range (1.4 ±1.0 V) ±8 Start Up Time, 90% of final RF level in VP-P 2.0 Aging @ 25 °C ±1 Harmonics SSB Phase Noise @ 1 kHz Carrier Offset ppm ms ppm/year -5.0 dBc -130 dBc/Hz maximum Stanard Shipping Quantity on 180 mm (7”) Reel Lid Symbolization ppm ±14 1000 units 9007 // YWWS CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. The design, manufacturing process, and specifications of this device are subject to change without notice. www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 1 of 3 XVT9007 - 2/2/10 SM3225-4 Case 4-Terminal Surface-Mount Seam Weld Case 3.2 x 2.5 mm Nominal Footprint 0.79 0.8 0.79 2.5 ±0.2 3.2 ±0.2 1.3 (Max) 1.5 0.79 2 0.79 0.8 1 Dimensions in mm 4 3 1.5 Application Circuit Pin Connection 1 Vcon 2 GND/CASE GND 3 Output 4 Vcc V C o n tro l V o lta g e In p u t 2 1 www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. V o lta g e C o n tr o lle T e m p e ra tu C o m p e n s a C ry s ta l O s c illa to C C 4 d 1 0 n F re te d r 3 O u tp u t Page 2 of 3 XVT9007 - 2/2/10 Reel Dimensions mm A B C D E F G H T1 T2 T3 Dimension 180 60 13.0 2.0 9.1 2.9 4.9 3.9 9.0 11.4 1.2 Tolerance ±1.0 +1.0/-0.0 ±0.2 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.3 ±1.0 ±0.1 Tape Dimensions mm A0 B0 W F E P0 P1 P2 D1 D K0 t Dimension 2.80 3.71 8.00 3.50 1.75 4.00 4.00 2.00 1.50 1.00 1.75 0.25 Tolerance ±0.10 ±0.10 +0.30/-0.10 ±0.05 ±0.10 ±0.10 ±0.10 ±0.05 +0.10/-0.00 +0.25/-0.00 ±0.10 ±0.02 www.RFM.com E-mail: [email protected] ©2009-2010 by RF Monolithics, Inc. Page 3 of 3 XVT9007 - 2/2/10