XVC5002 • Voltage-controlled Crystal Oscillator • Complementary PECL Output • Enable/Disable Input • 7.2 x 5.2 x 1.8 mm Surface-mount Case • Complies with Directive 2002/95/EC (RoHS) 122.88 MHz VCXO Pb Case Electrical Characteristics Characteristic Nominal Frequency Sym Notes Minimum fo Typical Maximum 122.88 Units MHz Component Storage Temperature -55 +125 °C Storage Temperature in Tape and Reel -40 +85 °C Operating Temperature Range -40 +85 °C 3.63 V Power Supply Voltage Vdd 2.97 3.30 Load Impedance 50 ohm Output Logic Low (“0” level) Vdd - 1.810 Vdd - 1.620 V Output Logic High (“1” level) Vdd - 1.025 Vdd - 0.880 V 45 55 % Output Rise Time, 20% to 80% Vdd 1.0 ns Output Fall Time, 80% to 20% Vdd 1.0 ns 80 mA ±50 ppm Duty Cycle Symmetry Power Supply Current Control Voltage Input Range Idd Vcon 1.65 ±1.35 Frequency Stability Frequency Tuning Range, 1.65 ±1.35 V 1 ±50 ppm Start Up Time Enable Voltage Logic High V 10 ms 0.7 Vdd - Enable Voltage Logic Low Phase Jitter, integrated over 12 kHz to 20 MHz Standard Shipping Quantity on 180 mm (7”) Reel Lid Symbolization 0.3 Vdd - 1.0 ps 1000 units 5002 || YWWS CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. Frequency tuning range beyond the initial tolerance at 25 °C, plus drift due to changes in temperature, power supply voltage and aging. The design, manufacturing process, and specifications of this device are subject to change without notice. www.RFM.com E-mail: [email protected] ©2010 by RF Monolithics, Inc. Page 1 of 3 XVC5002 - 12/7/10 Case Dimensions and Pin Functions Enable/Disable Function: If Pin 2 is logic high or open, differential outputs on Pins 4 and 5 are enabled. If Pin 2 is logic low, differential outputs on Pins 4 and 5 are disabled. www.RFM.com E-mail: [email protected] ©2010 by RF Monolithics, Inc. Page 2 of 3 XVC5002 - 12/7/10 Reel Dimensions Tape Dimensions Case Orientation in Tape www.RFM.com E-mail: [email protected] ©2010 by RF Monolithics, Inc. Page 3 of 3 XVC5002 - 12/7/10