QL85I6SA TECHNICAL DATA Infrared Laser Diode Features • • • • AlGaAs laser diode Peak Wavelength: 850 nm Optical Ouput Power: 5 mW Package: 5.6 mm, with Photo Diode Electrical Connection Pin Configuration Bottom View m-type PIN 1 2 3 Function LD Cathode LD Anode, PD Cathode PD Anode Absolute Maximum Ratings (TC=25°C) Item CW Output Power LD Reverse Voltage PD Reverse Voltage Operating Case Temperature Storage Temperature Symbol PO VR (LD) VR (PD) TC Tstg Value 32 2 30 -10 … +60 -40 … +85 Unit mW V V °C °C Specifications (TC=25°C) Item Optical Specifications CW Output Power Peak Wavelength * FWHM Beam Divergence Emission Point Accuracy Astigmatism Electrical Specifications Threshold Current Operating Current Slope Efficiency Operating Voltage Monitor Current Angle Symbol Min. Typ. Max. Unit PO λP θ║ θ┴ Δθ║ Δθ┴ As 845 7.0 25 -2.0 -3.0 30 850 9.0 29 - 860 12.0 36 2.0 3.0 15 mW nm deg deg deg deg µm Ith Iop η Uop Im 5 50 0.4 0.05 20 70 0.7 2.0 0.2 35 90 1.0 2.5 0.5 mA mA W/A V mA * Measuring specifications. The above specifications are for reference purpose only and subjected to change without prior notice. 10.12.2010 QL85I6SA 1 of 1 Package Dimensons 5.6 mm Package (Unit:mm) 10.12.2010 QL85I6SA 2 of 2 Cautions 1. Operating methode • This LD shall change its forward voltage requirement and optical ouput power according to temperature change. Also, the LD will require more operation current to maintain same ouput power as it degrades. In order to maintain output power, use of APC (Automatic Power Control) is recommended. Which use monitor feedback to adjust the operation current. • Confirm that electrical spike current generated by switching on and off does not exceed the maximum operating current level specified herein above as absolute maximum rating. Also, employ appropriat countermeasures to reduce chattering and/or overshooting in the circuit. 2. Static Electricity • Static electricity or electrical surges will reduce and degrade the reliability of the LDs. It is recommended to use a wrist trap or anti-electrostatic glove when handeling the Product. 3. Absolute Maximum Rating • Active layer of LDs shall have high current density and generate high electric field during its operation. In order to prevent excessive damage, the LD must be operated striclty below absolute maximum rating. 10.12.2010 QL85I6SA 3 of 3