SQ3418EEV Automotive N-Channel 40 V (D-S) 175 °C MOSFET PRODUCT SUMMARY VDS (V) 40 RDS(on) () at VGS = 10 V FEATURES 0.032 RDS(on) () at VGS = 4.5 V • Halogen-free According to IEC 61249-2-21 Definition • TrenchFET® Power MOSFET • Typical ESD Protection 800 V • AEC-Q101 Qualifiedd • 100 % Rg and UIS Tested • Compliant to RoHS Directive 2002/95/EC 0.048 ID (A) 8 Configuration Single TSOP-6 Top V iew 3 mm 1 6 2 5 3 4 (1, 2, 5, 6) D (3) G 2.85 mm Marking Code: 8Bxxx (4) S N-Channel MOSFET ORDERING INFORMATION Package TSOP-6 Lead (Pb)-free and Halogen-free SQ3418EEV-T1-GE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS 40 Gate-Source Voltage VGS ± 20 Continuous Drain Current TC = 25 °Ca TC = 125 °C Continuous Source Current (Diode Conduction) Pulsed Drain Currentb Single Pulse Avalanche Current Single Pulse Avalanche Energy Maximum Power Dissipationb L = 0.1 mH TC = 25 °C TC = 125 °C Operating Junction and Storage Temperature Range ID V 8 5 IS 6 IDM 32 IAS 5 EAS 1.2 PD UNIT 5 1.6 A mJ W TJ, Tstg - 55 to + 175 °C SYMBOL LIMIT UNIT RthJA 110 RthJF 30 THERMAL RESISTANCE RATINGS PARAMETER Junction-to-Ambient Junction-to-Foot (Drain) PCB Mountc °C/W Notes a. Package limited. b. Pulse test; pulse width 300 μs, duty cycle 2 %. c. When mounted on 1" square PCB (FR-4 material). d. Parametric verification ongoing. 1 / 11 www.freescale.net.cn SQ3418EEV Automotive N-Channel 40 V (D-S) 175 °C MOSFET SPECIFICATIONS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current On-State Drain Currenta Drain-Source On-State Resistancea Forward Transconductanceb VDS VGS = 0, ID = 250 μA 40 - - VGS(th) VDS = VGS, ID = 250 μA 1.5 2.0 2.5 IGSS IDSS ID(on) RDS(on) VDS = 0 V, VGS = ± 12 V - - ± 500 nA VDS = 0 V, VGS = ± 20 V - - ±1 mA 1 VGS = 0 V VDS = 40 V - - VGS = 0 V VDS = 40 V, TJ = 125 °C - - 50 VGS = 0 V VDS = 40 V, TJ = 175 °C - - 150 VGS = 10 V VDS5 V 10 - - VGS = 10 V ID = 5 A - 0.026 0.032 VGS = 10 V ID = 5 A, TJ = 125 °C - - 0.050 VGS = 10 V ID = 5 A, TJ = 175 °C - - 0.061 VGS = 4.5 V ID = 4 A - 0.040 0.048 - 13 - - 528 660 - 112 140 - 76 95 gfs V VDS = 15 V, ID = 4 A μA A S Dynamicb Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Chargec Qg Gate-Source Chargec Qgs Gate-Drain Chargec Qgd Gate Resistance Turn-On Delay Timec Rise Timec Turn-Off Delay Timec Fall Timec VGS = 0 V VGS = 4.5 V VDS = 25 V, f = 1 MHz VDS = 20 V, ID = 4 A f = 1 MHz Rg td(on) tr VDD = 20 V, RL = 4 ID 5 A, VGEN = 10 V, Rg = 1 td(off) tf Source-Drain Diode Ratings and Characteristics TC = 25 Pulsed Currenta ISM Forward Voltage VSD - 7.1 11 - 1.7 - - 3.7 - 1.2 2.4 3.6 - 8 12 - 8 12 - 15 23 - 7 11 pF nC ns °Cb IF = 3 A, VGS = 0 - - 32 A - 0.8 1.2 V Notes a. Pulse test; pulse width 300 μs, duty cycle 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 / 11 www.freescale.net.cn SQ3418EEV Automotive N-Channel 40 V (D-S) 175 °C MOSFET TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 10-2 0.005 T J = 25 °C 10-3 10-4 IGSS - Gate Current (A) 0.003 0.002 10-5 T J = 150 °C 10-6 T J = 25 °C 10-7 10-8 0.001 10-9 10-10 0.000 0 6 12 18 24 0 30 6 VGS - Gate-Source Voltage (V) Gate Current vs. Gate-Source Voltage 12 18 24 VGS - Gate-Source Voltage (V) 30 Gate Current vs. Gate-Source Voltage 24 30 VGS = 10 V thru 5 V 24 ID - Drain Current (A) 18 ID - Drain Current (A) 18 12 12 TC = 25 °C 6 VGS = 4 V 6 TC = 125 °C VGS = 3 V TC = - 55 °C 0 0 0 2 4 6 8 0 10 2 4 6 8 10 VGS - Gate-to-Source Voltage (V) VDS - Drain-to-Source Voltage (V) Output Characteristics Transfer Characteristics 10 25 gfs - Transconductance (S) 8 ID - Drain Current (A) IGSS - Gate Current (A) 0.004 TC = 125 °C 6 TC = 25 °C 4 TC = - 55 °C 20 TC = 25 °C 15 TC = 125 °C 10 5 2 TC = - 55 °C 0 0 0 1 2 3 4 VGS - Gate-to-Source Voltage (V) Transfer Characteristics 3 / 11 5 0 2 4 6 ID - Drain Current (A) 8 10 Transconductance www.freescale.net.cn SQ3418EEV Automotive N-Channel 40 V (D-S) 175 °C MOSFET 0.15 1000 0.12 800 Ciss C - Capacitance (pF) RDS(on) - On-Resistance (Ω) TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 0.09 VGS = 4.5 V 0.06 600 400 Coss VGS = 10 V 0.03 200 0.00 0 Crss 0 6 12 18 ID - Drain Current (A) 24 30 0 5 10 15 20 25 30 VDS - Drain-to-Source Voltage (V) On-Resistance vs. Drain Current 150 175 2.0 RDS(on) - On-Resistance (Normalized) VGS - Gate-to-Source Voltage (V) 40 Capacitance 5 ID = 4 A VDS = 20 V 4 3 2 1 0 2 4 6 8 Qg - Total Gate Charge (nC) ID = 5 A 1.7 1.4 VGS = 10 V 1.1 0.8 0.5 - 50 - 25 0 10 0 25 50 75 100 125 TJ - Junction Temperature (°C) Gate Charge On-Resistance vs. Junction Temperature 100 0.25 10 0.20 RDS(on) - On-Resistance (Ω) IS - Source Current (A) 35 TJ = 150 °C 1 0.1 TJ = 25 °C 0.01 0.15 0.10 TJ = 150 °C 0.05 TJ = 25 °C 0.001 0.00 0.0 0.2 0.4 0.6 0.8 1.0 VSD - Source-to-Drain Voltage (V) Source-Drain Diode Forward Voltage 4 / 11 1.2 0 2 4 6 8 VGS - Gate-to-Source Voltage (V) 10 On-Resistance vs. Gate-Source Voltage www.freescale.net.cn SQ3418EEV Automotive N-Channel 40 V (D-S) 175 °C MOSFET TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) 60 0.6 ID = 1 mA VDS - Drain-to-Source Voltage (V) 0.0 - 0.3 ID = 5 mA - 0.6 ID = 250 μA - 0.9 - 1.2 - 50 - 25 0 25 50 75 100 TJ - Temperature (°C) 125 150 57 54 51 48 45 - 50 - 25 175 Threshold Voltage 0 25 50 75 100 125 TJ - Junction Temperature (°C) 150 175 Drain-Source Breakdown vs. Junction Temperature 100 IDM Limited ID - Drain Current (A) VGS(th) Variance (V) 0.3 100 μs 10 Limited by RDS(on)* 1 ms ID Limited 1 10 ms 100 ms 1 s, 10 s, DC 0.1 BVDSS Limited TC = 25 °C Single Pulse 0.01 0.01 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area 5 / 11 www.freescale.net.cn SQ3418EEV Automotive N-Channel 40 V (D-S) 175 °C MOSFET THERMAL RATINGS (TA = 25 °C, unless otherwise noted) 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 Notes: 0.05 PDM 0.1 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = RthJA = 110 °C/W 0.02 3. TJM - TA = PDMZthJA(t) Single Pulse 4. Surface Mounted 0.01 10 -4 10 -3 10 -2 10 -1 1 Square Wave Pulse Duration (s) 100 10 1000 Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 1 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Foot Note • The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction-to-Ambient (25 °C) - Normalized Transient Thermal Impedance Junction-to-Foot (25 °C) are given for general guidelines only to enable the user to get a “ball park” indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions. 6 / 11 www.freescale.net.cn SQ3418EEV Automotive N-Channel 40 V (D-S) 175 °C MOSFET TSOP: 5/6−LEAD JEDEC Part Number: MO-193C e1 e1 5 4 6 E1 1 2 5 4 E E1 1 3 2 3 -B- e b E -B- e 0.15 M C B A 5-LEAD TSOP b 0.15 M C B A 6-LEAD TSOP 4x 1 -A- D 0.17 Ref c R R A2 A L2 Gauge Plane Seating Plane Seating Plane 0.08 C L A1 -C- (L1) 4x 1 MILLIMETERS Dim A A1 A2 b c D E E1 e e1 L L1 L2 R Min Nom Max Min Nom Max 0.91 - 1.10 0.036 - 0.043 0.01 - 0.10 0.0004 - 0.004 0.90 - 1.00 0.035 0.038 0.039 0.30 0.32 0.45 0.012 0.013 0.018 0.10 0.15 0.20 0.004 0.006 0.008 2.95 3.05 3.10 0.116 0.120 0.122 2.70 2.85 2.98 0.106 0.112 0.117 1.55 1.65 1.70 0.061 0.065 0.067 0.95 BSC 0.0374 BSC 1.80 1.90 2.00 0.071 0.075 0.079 0.32 - 0.50 0.012 - 0.020 0.60 Ref 0.024 Ref 0.25 BSC 0.010 BSC 0.10 - - 0.004 - - 0 4 8 0 4 8 7 Nom 1 ECN: C-06593-Rev. I, 18-Dec-06 DWG: 5540 7 / 11 INCHES 7 Nom www.freescale.net.cn SQ3418EEV Automotive N-Channel 40 V (D-S) 175 °C MOSFET Mounting LITTLE FOOTR TSOP-6 Power MOSFETs Surface mounted power MOSFET packaging has been based on integrated circuit and small signal packages. Those packages have been modified to provide the improvements in heat transfer required by power MOSFETs. Leadframe materials and design, molding compounds, and die attach materials have been changed. What has remained the same is the footprint of the packages. The basis of the pad design for surface mounted power MOSFET is the basic footprint for the package. For the TSOP-6 package outline drawing see www.freescale.net.cn and see www.freescale.net.cn for the minimum pad footprint. In converting the footprint to the pad set for a power MOSFET, you must remember that not only do you want to make electrical connection to the package, but you must made thermal connection and provide a means to draw heat from the package, and move it away from the package. In the case of the TSOP-6 package, the electrical connections are very simple. Pins 1, 2, 5, and 6 are the drain of the MOSFET and are connected together. For a small signal device or integrated circuit, typical connections would be made with traces that are 0.020 inches wide. Since the drain pins serve the additional function of providing the thermal connection to the package, this level of connection is inadequate. The total cross section of the copper may be adequate to carry the current required for the application, but it presents a large thermal impedance. Also, heat spreads in a circular fashion from the heat source. In this case the drain pins are the heat sources when looking at heat spread on the PC board. Since surface mounted packages are small, and reflow soldering is the most common form of soldering for surface mount components, “thermal” connections from the planar copper to the pads have not been used. Even if additional planar copper area is used, there should be no problems in the soldering process. The actual solder connections are defined by the solder mask openings. By combining the basic footprint with the copper plane on the drain pins, the solder mask generation occurs automatically. A final item to keep in mind is the width of the power traces. The absolute minimum power trace width must be determined by the amount of current it has to carry. For thermal reasons, this minimum width should be at least 0.020 inches. The use of wide traces connected to the drain plane provides a low impedance path for heat to move away from the device. REFLOW SOLDERING Vishay Siliconix surface-mount packages meet solder reflow reliability requirements. Devices are subjected to solder reflow as a test preconditioning and are then reliability-tested using temperature cycle, bias humidity, HAST, or pressure pot. The solder reflow temperature profile used, and the temperatures and time duration, are shown in Figures 2 and 3. Figure 1 shows the copper spreading recommended footprint for the TSOP-6 package. This pattern shows the starting point for utilizing the board area available for the heat spreading copper. To create this pattern, a plane of copper overlays the basic pattern on pins 1,2,5, and 6. The copper plane connects the drain pins electrically, but more importantly provides planar copper to draw heat from the drain leads and start the process of spreading the heat so it can be dissipated into the ambient air. Notice that the planar copper is shaped like a “T” to move heat away from the drain leads in all directions. This pattern uses all the available area underneath the body for this purpose. 0.167 4.25 0.074 1.875 0.014 0.35 0.122 3.1 0.026 0.65 0.049 1.25 0.049 1.25 0.010 0.25 FIGURE 1. Recommended Copper Spreading Footprint 8 / 11 Ramp-Up Rate +6_C/Second Maximum Temperature @ 155 " 15_C 120 Seconds Maximum Temperature Above 180_C 70 − 180 Seconds Maximum Temperature 240 +5/−0_C Time at Maximum Temperature 20 − 40 Seconds Ramp-Down Rate +6_C/Second Maximum FIGURE 2. Solder Reflow Temperature Profile www.freescale.net.cn SQ3418EEV Automotive N-Channel 40 V (D-S) 175 °C MOSFET 10 s (max) 255 − 260_C 1X4_C/s (max) 3-6_C/s (max) 217_C 140 − 170_C 60 s (max) 60-120 s (min) Pre-Heating Zone 3_C/s (max) Reflow Zone Maximum peak temperature at 240_C is allowed. FIGURE 3. Solder Reflow Temperature and Time Durations THERMAL PERFORMANCE TABLE 1. Equivalent Steady State Performance—TSOP-6 Thermal Resistance Rqjf 30_C/W On-Resistance vs. Junction Temperature 1.6 VGS = 4.5 V ID = 6.1 A 1.4 rDS(on) − On-Resiistance (Normalized) A basic measure of a device’s thermal performance is the junction-to-case thermal resistance, Rqjc, or the junction-to-foot thermal resistance, Rqjf. This parameter is measured for the device mounted to an infinite heat sink and is therefore a characterization of the device only, in other words, independent of the properties of the object to which the device is mounted. Table 1 shows the thermal performance of the TSOP-6. 1.2 1.0 0.8 0.6 −50 SYSTEM AND ELECTRICAL IMPACT OF TSOP-6 −25 0 25 50 75 100 125 TJ − Junction Temperature (_C) FIGURE 4. Si3434DV In any design, one must take into account the change in MOSFET rDS(on) with temperature (Figure 4). 9 / 11 www.freescale.net.cn 150 SQ3418EEV Automotive N-Channel 40 V (D-S) 175 °C MOSFET RECOMMENDED MINIMUM PADS FOR TSOP-6 0.099 0.020 0.019 (0.508) (0.493) (1.626) 0.064 0.028 0.039 (1.001) (0.699) (3.023) 0.119 (2.510) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index Return to Index 10 / 11 www.freescale.net.cn SQ3418EEV Automotive N-Channel 40 V (D-S) 175 °C MOSFET Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. freestyle Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on it s or their behalf (collectively, “freestyle”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. freestyle makes no warranty, representation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on freestyle’s knowledge of typical requirements that are often placed on freestyle products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify freestyle’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, freestyle products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the freestyle product could result in personal injury or death. Customers using or selling freestyle products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold freestyle and its distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vis hay Material Category Policy freestyle Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwis e specified as non-compliant. Please note that some freestyle documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002 /95/EC conform to Directive 2011/65/EU. 11 / 11 www.freescale.net.cn