PENB1035B Universal 56V, 35W (IEEE802.3at Compliant) PoE Gigabit 3 Year Warranty •10/100/1000 (MbPS) Data Rates •Self-contained Injector •100-240Vac Universal Input •IEEE802.3at Compliant Detection, Disconnect, Overload, and Overvoltage Control Function •Load Diagnostic LEDs •Overload Shutdown and Short Circuit Protection •Regulated Output with Low Ripple •Compliant to UL/IEC/EN60950-1 •LPS (Limited Power Source) Compliant Description The PENB1035 Series of Power-over-Ethernet (PoE) adapters operate from a 90 to 264Vac input range, and provide up to 35W of output power at an output voltage of 56Vdc. These models are capable of operating with Gigabit Data rates, and are available in IEEE802.3at compliant and non-compliant versions. Features include power and diagnostic LEDs, and overvoltage, overload, and short circuit protection. Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated AC Input Input Current Short Circuit Protection 100K hours, calculated 10mS min. @ 115Vac, 60Hz 60mS min. @ 230Vac, 50Hz See models’ chart 2.0 sec max. @ 115Vac, 60Hz 2.0 sec max. @ 230Vac, 50Hz 100mS max. @ 115Vac, 60Hz 100mS max. @ 230Vac, 50Hz 10 minutes max @264Vac/60Hz 35W continuous, convection cooled Overvoltage Protection Provided Ripple and Noise See chart Operating Temperature Output Voltage See chart Storage Temperature Total Regulation See chart Relative Humidity Inrush Current Input Protection Dialectric Withstand Earth Leakage Current Output Power 90-264Vac, 47-63 Hz single phase 1.5A @ 90Vac 0.75A @ 180Vac 60A peak, cold start Internal Primary Fuse (3.15A/250V) provided 4242Vdc Primary – Secondary, 2,150Vdc Primary – GND, 500Vdc Secondary - GND <250µA @ 264Vac, 60Hz Case Material Dimensions 94V-0 Black Polycarbonate W: 2.13” x L: 5.24” x H: 1.38”. Weight: 180g MTBF Hold-Up Time Efficiency Turn On Time Output Rise Time 0° to +40°C -30° to +85°C 5% to 95%, non-condensing Altitude 0 to 10,000 ft Safety Standards UL/IEC/EN60950-1, CE, CB Models Model Number Output Voltage PENB1035B5600F01 56Vdc Notes: 1. Output Current Min Max 0A 0.6A Ripple & Noise¹ Max. Power 560mV pk-pk 35W Regulation Line Load AC Input Receptacle² ±1% IEC320, C14 ±5% Measured at 20MHz bandwidth, with noise probe directly across output terminals, and load terminated with 0.1μF ceramic and 10μF low ESR electrolytic capacitors. Input Receptacle Options: "F" = IEC320 C14 Class I Grounded "Q" = IEC320 C18 Class II Ungrounded "N" = IEC320 C8 Class II Ungrounded ______________________________________________________________________________________________________________________________ SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 805.832.6131 • Email: [email protected] • www.slpower.com 1 of 2 PENB1035B Universal 56V, 35W (IEEE802.3at Compliant) PoE Gigabit 3 Year Warranty EMI/EMC Compliance Emissions EN55022, EN55024 Static Discharge Immunity EN61000-4-2 Radiated RF Immunity EN61000-4-3 EFT/Burst Immunity EN61000-4-4 Line Surge Immunity EN61000-4-5 Conducted RF Immunity EN61000-4-6 Power Frequency Magnetic Field Immunity EN61000-4-8 Voltage Dip Immunity EN61000-4-11 Line Harmonic Emissions EN61000-3-2 Flicker Test EN61000-3-3 Outline Drawing Pinout: “Personalized PoE”: SL Power can “personalize” your PoE adapter products in many ways: Data Input Power & Data Out Custom Label Artwork. Custom Safety Agency Approvals Mounting bracket options Input/Output Cables/cords Custom packaging Contact your local SL Power Sales Representative for details. Data Sheet © 2012 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 9/17/2012 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. ______________________________________________________________________________________________________________________________ 2 of 2 SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 805.832.6131 • Email: [email protected] • www.slpower.com