PW125 I T E 1 5 - 4 0 W AT T S E R I E S PW125 SWITCH-MODE P O W E R S U P P LY PW125 Voltage DC Ault Part No. Max Amps Max Watts Ripple p-p Max • 100-250 VAC Universal Input PW125XA0303_01 3.3V 5.00 16.5 50mV • Desktop / Wallmount Styles PW125XA0503_01 5V 5.00 25.0 50mV • Single Output Up to 40W PW125XA0703_01 7V 4.50 31.5 70mV • Regulated Output With Low Ripple PW125XA0903_01 9V 4.00 36.0 90mV • Meets Safety Agency Requirements PW125XA1203_01 12V 3.40 40.8 120mV • Complies With EMI/RFI Regulations PW125XA1503_01 15V 2.50 37.5 150mV CE Compliant PW125XA1803_01 18V 2.10 37.5 180mV • PW125XA2403_01 24V 1.67 40.0 240mV • Impact Resistant Polycarbonate Enclosure PW125XA4803_01 48V 0.84 40.0 480mV • Private Label Marking Available • 3 Year Warranty • Modified and Custom Designs Also Available Ault AultPart PartNo. No.Key Key PW125 X A 05 03 __ 01 Product Family Name Design Revision Changes Voltage DC Connector Input Configuration/ Model Type (see pg. 2) Standard (no modifications, special artwork or special packaging) Manufacturing Location (volume dependent) A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2002 Ault Inc. PW125 I T E 1 5 - 4 0 W AT T S E R I E S Input Electrical Voltage 100-250 VAC -10%, +6% Topology Switching-fixed frequency flyback Line Frequency 47-63 Hz Efficiency Up to 85% Current 1.0 Amp max. at 90 VAC input EMI Complies with EMC Directives Protection Internal primary current fuse, Inrush limiting, Thermal shutdown CE CE Compliant MTBF 100,000 Calculated Hours Minimum Output Environmental Combined Line and Load Voltage Regulation ±1% excluding cord Ripple Operating Temperature 0º to 40º C with no derating See table Storage Temperature -30º to +85º C Transient Response 0.5 msec. for 50% load change typical Relative Humidity 5% to 95% non-condensing Holdup Time 18 msec min. @ 120 VAC 80 msec min. @ 240 VAC Altitude 0-10,000 feet Cooling Convectional-non vented case Protection Overcurrent protection, Short circuit Protection Cord and Connector 6 ft, 2 conductor, 18 AWG #3 connector: Other connectors also available. Safety Approvals Agency Listings cULus 60950, TUV/IEC EN60950, Australian, Japanese certification available – extra fees apply IEC320 w/o ground C18 (Q) Case and Dimensions All Models 3.92L x 2.58W x 1.61H (in) 100L x 66W x 41H (mm) Case Material 94V0 polycarbonate; black is standard color; other colors available - extra charges may apply Weight Max. 10 ounces, 285 grams (excluding cord) Connector Input Configuration IEC320 w/ground C14 (F) Mechanical N. America/ Japan (B) Europe (M) United Kingdom (G) Australian (E) Specify the Input Configuration Code in your order. Pinout Code Center contact: positive Description Switchcraft 760 plug or equivalent Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2002 Ault Inc.