PW136 I T E 2 3 - 6 0 W AT T S E R I E S Photo shows Ault #3 Connector PW136 SWITCH-MODE P O W E R S U P P LY PW136 Ault Part No. Voltage DC Max Amps Max Watts Ripple p-p Max • 100-250 VAC Universal Input PW136RA0351_01 3.3V 7.00 23.1 50mV • Desktop / Wallmount Styles PW136RA0551_01 5V 6.00 30.0 50mV • Single Output Up to 60W PW136RA0751_01 7V 5.50 38.5 70mV • Regulated Output With Low Ripple PW136RA0951_01 9V 5.50 49.5 100mV • Meets Safety Agency Requirements PW136RA1203_01 12V 5.00 60.0 120mV • Complies With EMI/RFI Regulations PW136RA1503_01 15V 4.00 60.0 150mV CE Compliant PW136RA1803_01 18V 3.33 60.0 180mV • PW136RA2403_01 24V 2.50 60.0 240mV • Impact Resistant Polycarbonate Enclosure PW136RA4803_01 48V 1.25 60.0 480mV • Private Label Marking Available • 3 Year Warranty • Modified and Custom Designs Also Available Ault AultPart PartNo. No.Key Key PW136 R A 05 51 __ 01 Product Family Name Design Revision Changes Voltage DC Connector Input Configuration/ Model Type (see pg. 2) Standard (no modifications, special artwork or special packaging) Manufacturing Location (volume dependent) A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2004 Ault Inc. PW136 I T E 2 3 - 6 0 W AT T S E R I E S Input Electrical Voltage 100-250 VAC -10%, +6% Topology Switching-fixed frequency flyback Line Frequency 47-63 Hz Dielectric Withstand Current 1.0 Amp max. at 90 VAC input 3000VAC, 4242 VDC primary-secondary 1500 VAC, 2121 VDC primary-GND Protection Internal primary current fuse, Inrush limiting, Thermal shutdown Spacing 6.4mm primary-secondary Efficiency Up to 85% EMI Complies with EMC Directives CE CE Compliant MTBF 100,000 Calculated Hours Minimum Output Combined Line and Load Voltage Regulation ±1% (excluding cord) Ripple See table Transient Response 0.5 msec. for 50% load change typical Holdup Time 18 msec min. @ 120 VAC 80 msec min. @ 240 VAC Environmental Protection Overcurrent protection, Short circuit Protection Cord and Connectors 6 ft, 2 conductor, 18 AWG #3 connector for 12V and higher models; #51 connector for 9V and lower models. Other connectors also available. Operating Temperature 0º to 40º C with no derating Storage Temperature -30º to +85º C Relative Humidity 5% to 95% non-condensing Altitude 0-10,000 feet Cooling Convectional-non vented case Mechanical Case and Dimensions All Models 3.92L x 2.58W x 1.61H (in) 100L x 66W x 41H (mm) Case Material Black 94V0 Polycarbonate Weight Max. 10 ounces, 285 grams (excluding cord) Safety Approvals Agency Listings cULus 60950, TUV/IEC EN60950 Connector Input Configuration IEC320 w/ground C14 (F) IEC320 w/o ground C18 (Q) N. America/ Japan (B) Europe (M) United Kingdom (G) Specify the Input Configuration Code in your order. Pinout Code Center contact: positive Description Switchcraft 760 plug or equivalent Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL [email protected] | WEB www.aultinc.com © Copyright 2004 Ault Inc.