SSDI SCR010B

Solid State Devices, Inc.
SFS3027S.22 through
SFS3029S.22
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Designer’s Data Sheet
0.5 AMP, 30 - 100 Volt
SILICON CONTROLLED
RECTIFIER
Part Number/Ordering Information 1/
SFS302 ___ S.22 ___
│
│
│
│
│
└
└
Screening 2/
__ = Not Screened
TX = TX Level
TXV = TXV
S = S Level
Voltage/Family
7 = 30V
8 = 60V
9 = 100V
FEATURES:
 Passivated planar construction
 Low on-state voltage and fast switching
 Hermetically Sealed surface mount power
package
MAXIMUM RATINGS
Symbol
Value
Units
Peak Repetitive Reverse Voltage
and DC Blocking Voltage
SFS3027
SFS3028
SFS3029
VDRM
VRRM
30
60
100
Volts
Non-Repetitive Peak Reverse Blocking Voltage
(t < 5.0 ms)
SFS3027
SFS3028
SFS3029
VRSM
50
100
200
Volts
IT (RMS)
0.5
Amps
(One Cycle, 60 Hz )
ITSM
8
Amps
Peak Gate Power
PGM
0.1
Watts
Average Gate Current
IG(ave)
0.025
Amps
Peak Gate Current
IGM
0.25
Amps
Reverse Gate Current
IGR
0.003
Amps
Reverse Gate Voltage
VGM
5.0
Volts
TJ
-65 to +150
°C
Storage Temperature Range
Tstg
-65 to +200
°C
Thermal Resistance, Junction to Case
RθJC
15
°C/W
RMS On-State Current,
(All Conduction Angles, TC = 100°C)
Peak Non-Repetitive Surge Current
Operating Junction Temperature Range
NOTES:
SMD.22
1/ For ordering information, price, operating curves, and availability- Contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Unless otherwise specified, all electrical characteristics @25°C.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: SCR010B
DOC
SFS3027S.22 through
SFS3029S.22
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
ELECTRICAL CHARACTERISTICS
Peak Reverse Blocking Current
Rated VRRM, RGK = 1000 Ω
Peak Forward Blocking Current
Rated VDRM, RGK = 1000 Ω
Symbol
Min
Typical
Max
Unit
TC = 25°C
TC = 150°C
IRRM
––
0.08
0.15
0.1
50
μA
TC = 25°C
TC = 150°C
IDRM
––
0.08
0.15
0.1
20
μA
VTM
0.8
1.1
1.5
V
TC = 25°C
TC = -65°C
IGT
––
––
25
50
200
1200
μA
TC = 25°C
TC = -65°C
TC = 150°C
VGT
0.4
0.6
0.1
0.55
0.75
0.20
0.8
1.1
0.6
V
TC = 25°C
TC = -65°C
TC = 150°C
IH
0.3
0.5
0.05
1.0
1.5
0.38
5.0
10.0
1.0
mA
Peak On-State Voltage
IF = 1.0 A pulse
Gate Trigger Current
VD = 5 VDC, RL = 100 Ω, Re = 10 kΩ
Gate Trigger Voltage
VD = 5 VDC, RL = 100 Ω, Re = 100 Ω
Holding Current
VD = 5 VDC, RGK = 1000 Ω
Case Outline: SMD.22
PAD 1: ANODE
PAD 2: CATHODE
PAD 3: GATE
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: SCR010B
DOC