SSR3515CTS1 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 35 Amp CENTER TAP POWER SCHOTTKY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SSR3515 __ __ __ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level │ │ │ TXV = TXV Level S = S Level │ │ │ └ Package S1 = SMD1 │ └ Configuration CT = Common Cathode 150 Volts Features: • • • • • Low forward voltage drop resulting in extremely low conduction losses Extremely low switching losses Hermetically Sealed Power Package 2/ TX, TXV, and S-Level Screening Available Enhanced operating temperature range Maximum Ratings Symbol Value Units Peak Surge Reverse Voltage VRSM 150 Volts Peak Repetitive Reverse Voltage VRRM 150 Volts Each leg Package total IO ID2 20 35 Amps @ TC = 25°C IFSM 200 Amps @ 1.5 x VRRM IAR IAS 0.2 8 A @ L= 0.18 mH EAR 7 mJ @ TC = 25ºC PD TBD W T OP & TSTG -55 to+175 °C R0JC 2.5 1.25 ºC/W Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Non-repetitive Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Each leg) Max. Avalanche repetitive reverse current Max. Avalanche non-repetitive reverse current Non-repetitive Avalanche Energy Total Power Dissipation Operating & Storage Temperature Maximum Thermal Resistance, Junction to Case Each Leg Per Package Notes: 1/ For ordering information, price, operating curves, and availability- Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0053A SMD1 (S1) DOC SSR3515CTS1 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics, per leg Instantaneous Forward Voltage Drop (Pulsed, TA = 25 ºC) Instantaneous Forward Voltage Drop (Pulsed, TA = 125 ºC) Instantaneous Forward Voltage Drop (Pulsed, TA = -55 ºC) Reverse Leakage Current (Pulsed, TA = 25 ºC) Reverse Leakage Current (Pulsed, TA = 125 ºC) Reverse Leakage Current (Pulsed, TA = 175 ºC) Symbol Min Typ Max IF = 10Adc IF = 15Adc IF = 35Adc IF = 10Adc IF = 15Adc IF = 35Adc IF = 10Adc IF = 15Adc IF = 35Adc VR = 100 V VR = 125 V VR = 150 V VR = 100 V VR = 125 V VR = 150 V VR = 100 V VR = 125 V VR = 150 V VF1 VF2 VF3 VF4 VF5 VF6 VF7 VF8 VF9 IR1 IR2 IR3 IR4 IR5 IR6 IR7 IR8 IR9 –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– 0.800 0.870 1.075 0.660 0.740 0.980 0.950 1.020 1.280 5 8 12 1 1.6 2.5 20 23 30 0.85 0.95 1.20 0.73 0.85 1.10 1.00 1.12 1.43 –– –– 500 –– –– 20 –– –– –– VR = 10V CJ –– 250 350 Junction Capacitance (TA = 25ºC, f = 1MHz) Units VDC VDC VDC μA mA mA pF Case Outline: SMD1 (S1) Tolerances (Unless Specified): .XX = ±.030” .XXX = ±.010” NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0053A DOC