PR2001G - PR2007G 2.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER Features · · · · · · · Glass Passivated Die Construction Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 80A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 B A · · · C D Mechanical Data · · A DO-15 Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 0.4 grams (approx.) Dim Min Max A 25.40 ¾ B 5.50 7.62 C 0.686 0.889 D 2.60 3.60 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PR PR PR PR PR PR PR Symbol 2001G 2002G 2003G 2004G 2005G 2006G 2007G Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Drop Peak Reverse Current at Rated DC Blocking Voltage Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 2.0 A IFSM 80 A @ IF = 2.0A VFM 1.3 V @ TA = 25°C @ TA = 100°C IRM 5.0 100 mA Reverse Recovery Time (Note 3) trr Typical Junction Capacitance (Note 2) Cj 35 pF RqJA 50 K/W Tj, TSTG -65 to +150 °C Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 150 250 500 ns 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. DS27005 Rev. A1-2 1 of 2 PR2001G - PR2007G IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 2.0 1.6 1.2 0.8 0.4 Single phase half-wave 60 Hz resistive or inductive load 0 25 50 75 100 125 150 175 200 90 1.0 0.1 Tj = 25°C Pulse width = 300µs 0.01 0.4 0.6 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 Single Half-Sine-Wave (JEDEC Method) Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve 10 60 30 Tj = 25°C f = 1.0MHz 10 1 0 1 10 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current trr 50Ω NI (Non-inductive) (-) 10Ω NI Device Under Test (+) +0.5A (-) 0A Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS27005 Rev. A1-2 2 of 2 PR2001G - PR2007G