SF10AG - SF10JG 1.0A SUPER-FAST GLASS PASSIVATED RECTIFIER Features · · · · · · · Glass Passivated Die Construction Diffused Junction Super-Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 30A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 B A · · · · C D Mechanical Data · · A DO-41 Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 0.3 grams (approx.) Mounting Position: Any Dim Min Max A 25.40 ¾ B 4.06 5.21 C 0.71 0.864 D 2.00 2.72 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TA = 75°C (Note 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage @ IF = 1.0A @ TA = 25°C @ TA = 100°C Symbol SF10 AG SF10 BG SF10 CG SF10 DG SF10 FG SF10 GG SF10 HG SF10 JG Unit VRRM VRWM VR 50 100 150 200 300 400 500 600 V VR(RMS) 35 70 105 140 210 280 350 420 V IO 1.0 A IFSM 30 A VFM trr Typical Junction Capacitance (Note 2) Cj Operating and Storage Temperature Range Notes: 1.3 1.5 10 100 IRM Reverse Recovery Time (Note 3) Thermal Resistance Junction to Ambient 0.95 35 V mA 40 75 50 50 ns pF RqJA 75 K/W Tj, TSTG -65 to +150 °C 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. (See Figure 5) DS24012 Rev. A1-2 1 of 2 SF10AG - SF10JG IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 1.0 0.8 0.6 0.4 0.2 Single phase half-wave 60Hz resistive or inductive load 0 25 50 75 100 125 150 175 200 SF10AGSF10DG 10 SF10FGSF10GG 1.0 SF10HGSF10JG 0.1 0.01 Tj = 25°C Pulse width = 300µs 0.6 1.0 1.2 1.4 1.6 1.8 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 30 100 SF10AG - SF10GG SF10HG - SF10JG Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.8 20 10 0 10 Tj = 25°C f = 1.0MHz 1 1 10 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current trr 50Ω NI (Non-inductive) (-) 10Ω NI Device Under Test (+) +0.5A (-) 0A Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS24012 Rev. A1-2 2 of 2 SF10AG - SF10JG