SAF THRU SMF

SAF THRU SMF
SAF THRU SMF
AMP. SURFACE MOUNT GENERAL PURPOSE SILICON RECTIFIERS
1.0
1.0AMP.
SOD-123F
FEATURES
·Glass passivated device
·Ideal for surface mouted applications
·Low reverse leakage
·Metallurgically bonded construction
·High temperature soldering guaranteed:
250°C /10sec/0.375" lead length at 5 lbs tension
MECHANICAL DATA
·Case: JEDEC SOD-123FL,molded plastic
over passivated chip
·Terminals:Solder Plated, solderable per
MIL-STD-750, Method 2026
·Polarity: Color band denotes cathode end
·Weight: 0.006 ounces, 0.02 gram
·Mounting position: Any
MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.Single phase, half wave, 60Hz,resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL SAF
SBF
SDF
SGF
SJF
SKF
SM F
Type Number
marking
SA
SB
SD
SG
SJ
SK
SM
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward rectified Current
at TA =65°C (Note 1)
VRRM
VRMS
VDC
units
50
100
200
400
600
800
1000
V
35
70
140
280
420
560
700
V
50
100
200
400
600
800
1000
V
IF(AV)
1.0
A
IFSM
30
A
VF
1.1
V
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rate load (JEDEC
method)
Maximum Instantaneous forward Voltage at
1.0A DC
Maximum DC Reverse Current
at rated DC blocking voltage
@TA =25°C
@TA =125°C
Typical Junction Capacitance (Note 2)
Typical thermal resistance (Note 3)
Storage Temperature Range
Operation Temperature Range
10.0
IR
50.0
CJ
R(JA)
TSTG
TJ
4
pF
180
°C /W
-55 to +150
°C
-55 to +150
°C
Note:
1.Averaged over any 20 ms period.
2.Measured at 1MHz and applied reverse voltage of 4.0 volts d.c.
3.Thermal Resistance from Junction to Ambient at 0.375"(9.5mm) lead length,P.C.B.mounted
1
µA
SAF THRU SMF
RATING AND CHARACTERISTIC CURVES (SAF THRU SMF
SMF))
2