THCV216_Rev.1.00_E_Brief THCV216 V-by-One® HS High-speed video data receiver General Description Features THCV216 is designed to support video data transmission between the host and display. This chip can receive 39bit video data and 3bit control data via only a single differential cable at an LVDS clock frequency from 20MHz to 100MHz. This chip, which has two high-speed data lanes, can transmit the video data up to 1080p/10b/60Hz, 1080p/12b/60Hz. The maximum serial data rate is 3.75Gbps/lane. • • • • • • • • • Color Depth 6bit 8bit 10bit 12bit Link Single/Dual Single/Dual Single/Dual Single/Dual LVDS Clock Frequency 20MHz to 100MHz 20MHz to 100MHz 20MHz to 85MHz 20MHz to 75MHz • Color depth selectable: 6/8/10/12 bit Single/Dual Link selectable AC coupling LVDS Input internal termination CORE 1.8v, LVDS 3.3v Package: 64 pin TSSOP Wide frequency range CDR requires no external frequency reference Supports Spread Spectrum Clocking: Up to 30kHz/±0.5%(center spread) V-by-One® HS standard Version1.3 compliant Block Diagram LVDS Serializer LVDS Serializer Deserializer Deskew & Formatter Deserializer THine Electronics, Inc. Copyright(C)2012 THine Electronics, Inc. 1/3 THCV216_Rev.1.00_E_Brief Example System Diagram THCV216 THCV215 Rx0n Tx1p Rx1p Tx1n Rx1n 1.8V HTPDN LOCKN HTPDN LOCKN Display Tx0n RLA0+/RLB0+/RLC0+/RLD0+/RLE0+/RLF0+/RLCLK0+/RLA1+/RLB1+/RLC1+/RLD1+/RLE1+/RLF1+/RLCLK1+/- Display Rx0p Timing Controller Tx0p Timing Controller Application Processor TLA0+/TLB0+/TLC0+/TLD0+/TLE0+/TLF0+/TLCLK0+/TLA1+/TLB1+/TLC1+/TLD1+/TLE1+/TLF1+/TLCLK1+/- Example for LVDS to LVDS THCV217 THCV216 Application Processor R1[9:0] G1[9:0] B1[9:0] Tx0p Rx0p R2[9:0] G2[9:0] B2[9:0] Tx0n Rx0n Tx1p Rx1p Tx1n Rx1n HSYNC VSYNC DE CLKIN 1.8V 3.3V HTPDN LOCKN HTPDN LOCKN RLA0+/RLB0+/RLC0+/RLD0+/RLE0+/RLCLK0+/RLA1+/RLB1+/RLC1+/RLD1+/RLE1+/RLCLK1+/- Example for CMOS/TTL to LVDS Notices and Requests 1. 2. 3. 4. 5. 6. 7. 8. The product specifications described in this material are subject to change without prior notice. The circuit diagrams described in this material are examples of the application which may not always apply to the customer’s design. We are not responsible for possible errors and omissions in this material. Please note if errors or omissions should be found in this material, we may not be able to correct them immediately. This material contains our copy right, know-how or other proprietary. Copying or disclosing to third parties the contents of this material without our prior permission is prohibited. Note that if infringement of any third party's industrial ownership should occur by using this product, we will be exempted from the responsibility unless it directly relates to the production process or functions of the product. This product is presumed to be used for general electric equipment, not for the applications which require very high reliability (including medical equipment directly concerning people's life, aerospace equipment, or nuclear control equipment). Also, when using this product for the equipment concerned with the control and safety of the transportation means, the traffic signal equipment, or various Types of safety equipment, please do it after applying appropriate measures to the product. Despite our utmost efforts to improve the quality and reliability of the product, faults will occur with a certain small probability, which is inevitable to a semi-conductor product. Therefore, you are encouraged to have sufficiently redundant or error preventive design applied to the use of the product so as not to have our product cause any social or public damage. Please note that this product is not designed to be radiation-proof. Customers are asked, if required, to judge by themselves if this product falls under the category of strategic goods under the Foreign Exchange and Foreign Trade Control Law. THine Electronics, Inc. THine Electronics, Inc. Copyright(C)2012 THine Electronics, Inc. 2/3 THCV216_Rev.1.00_E_Brief [email protected] THine Electronics, Inc. Copyright(C)2012 THine Electronics, Inc. 3/3