Product specification KS210 DO-214AA(SMB) ■ Features Unit: mm 4.12 3.92 4.699 4.064 2.108 1.905 ● For surface mounted application 1 2 ● Low power loss, high efficiency ● High current capability, low VF 3.937 3.302 2.30 2.10 2.65 2.45 5.59 5.39 5.588 5.080 ● High Surge Current Capability 2.348 2.108 1.270 0.762 0.203 0.051 Recommended Land Pattern 0.305 0.152 ■ Maximum Ratings and Electrical Characteristics @TA=25℃ unless otherwise specified Parameter Symbol Rating Peak repetitive peak reverse voltage VRRM 100 Maximum RMS Voltage VRMS 80 VR 100 DC blocking voltage Unit V IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50 A Forward Voltage (Note 1) VFM 0.85 V IRM 0.5 10 mA Cj 130 pF RèJA 75 ℃/W Tj -65 to 125 ℃ Tstg -65 to 150 ℃ Average Rectified Output Current Peak Reverse Current At Rated DC Blocking Voltage @TL = 90℃ @IF = 2.0A @TA = 25℃ @TA = 100℃ Typical Junction Capacitance (Note 3) Thermal resistance junction to ambient (Note 2) Operating Temperature Range Storage temperature Notes: 1. Pulse Test with PW=300 usec, 1% Duty Cycle 2. Measured on P.C.Board with 0.4 x 0.4 (10mm x 10mm) Copper Pad Areas. 3. Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. http://www.twtysemi.com [email protected] 4008-318-123 1 of 1