Product specification DB107S ■ Features Unit:mm ● Ideal for Printed Circuit Board 4 1 ● Reliable low cost construction utilizing molded － ＋ 3 2 plastic technique ● High surge current capability 1. + 2. AC in 3. AC in 4. - ■ Absolute Maximum Ratings Ta = 25℃ unless otherwise specified Parameter Symbol Ratings Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRMM VRW M VDC 1000 V RMS Reverse Voltage V RMS 700 V IO 1.0 A IFS M 50 A VF 1.1 V 10 μA Average Forward Rectified Current @TA = 40℃ Non-Repetitive Peak Forward Surge Current, 8.3 ms Single half-sine-wave Superimposed on Rated Load (JEDECmethod) Maximum Forward Voltage @ IF = 1.0A Peak Reverse Current at Rated @ TA = 25℃ DC Blocking Voltage (per element) Typical Junction Capacitance IR @ TA = 125℃ (Note 1) Typical Thermal Resistance, Junction to Ambient (Note 2) Operating and Storage Temperature Range 0.5 mA CJ 25 pF RθJA 40 ℃/W Tj, Tstg -55 to +150 ℃ Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC 2. Thermal resistance from junction to ambient mounted on PC board with 0.5 X 0.5" (13mm x 13mm) copper pads. 3. Pulse Test: Pulse W idth 300msec, Duty Cycle 2% http://www.twtysemi.com [email protected] 4008-318-123 1 of 2 Product specification DB107S http://www.twtysemi.com [email protected] 4008-318-123 2 of 2