SUPERBRIGHT LED LAMP VAOL-5MWY2 Feature § § Package Dimension Low Power Consumption I.C. compatible Applications § § § Front Panel Indicator Dot-Matrix Module LED Bulb Description § § § These LEDs are Based on InGaN/Sapphire Material Technology Emitted color:White Diffusion Lens ＊Tolerance：± 0.01 0.25 Unit：± inch mm Absolute Maximum Ratings at Ta＝25℃ Symbol Parameter Max. Unit 100 mW PD Power Dissipation VR Reverse Voltage 5 V IAF Average Forward Current 20 mA IPF Peak Forward Current（Duty＝0.1，1kHz） 100 mA ― Derating Linear Form 25℃ 0.4 mA∕℃ Topr Operating Temperature Range –40 to ＋ 80 ℃ Tstg Storage Temperature Range –40 to ＋ 100 ℃ Lead Soldering Temperature [1.6mm（0.063inch）From Body] 260℃ For 5 Seconds. Electrical / Optical Characteristics and Curves at Ta＝25℃ Symbol Parameter Test Condition VF Forward Voltage IF＝ 20 mA IR Reverse Current VR＝ 5 △θ Half Intensity Angle IF＝ 20 mA 60 Deg. IV Luminous Intensity IF＝ 20 mA 5000 mcd. X Chromaticity IF＝ 20 mA 0.30 Y Coordination IF＝ 20 mA 0.30 Min. Typ. 3.5 V Max. Unit 4.0 V 50 μA Electrical Characteristics at Ta＝25℃ Symbol Iv VF λD Parameter Luminous Intensity Forward Voltage Dominant Wavelength Condition IF＝20mA IF＝20mA IF＝20mA Unit mcd V nm Binning Grade Range Grade Range Grade Range BIN 20 3500~4900 P0 2.8~3.0 WE Bluish White BIN 21 4900~6900 P1 3.0~3.2 WF Bluish White BIN 22 6900~9700 P2 3.2~3.4 WG Pure White P3 3.4~3.6 WH Pure White P4 3.6~3.8 WI Yellowish White P5 3.8~4.0 WJ Yellowish White Intensity: Tolerance of minimum and maximum = ± 15% Vf: Tolerance of minimum and maximum = ± 0.05v NOTE: 1. Static electricity and surge damages the LED. It is recommend to use a anti-static wrist band or anti-electrostatic glove when handing the LEDs. All devices, equipment and machinery must be properly grounded. 2. Specific binning requirements –please contact our home office Radiation Diagram IF=20 mA 50% Power Angle Angle Y=60 WHITE Typical Electro-optical Characteristic Curves (25°C Free Air Temperature Unless Otherwise Specified)