Series AM12E-FZ Picture coming soon FEATURES: • • • • • Models Single output Model AM12E-1203SH30-FZ AM12E-1205SH30-FZ AM12E-1212SH30-FZ AM12E-1215SH30-FZ AM12E-2403SH30-FZ AM12E-2405SH30-FZ AM12E-2412SH30-FZ AM12E-2415SH30-FZ AM12E-4803SH30-FZ AM12E-4805SH30-FZ AM12E-4812SH30-FZ AM12E-4815SH30-FZ 12 Watt | DC-DC Converter Remote On / Off Control Wide 2:1 input range High efficiency up to 87% Industry Standard Package No minimum load • • • • Input Voltage (V) Output Voltage (V) Output Current Max (mA) Capacitance load, max (μF) Input Voltage (V) Output Voltage (V) Output Current Max (mA) Capacitance load, max (μF) 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 3500 2400 1000 800 3500 2400 1000 800 3500 2400 1000 800 Models Dual output Model Operating temperature -40oC to + 85oC Input / Output Isolation 3000VDC Continuous short circuit protection Over Voltage Protection 4700 3300 680 330 4700 3300 680 330 4700 3300 680 330 Efficiency (%) 77 82 86 85 77 82 87 86 78 82 87 86 Efficiency (%) AM12E-1205DH30-FZ 9-18 ±5 ±1200 ±1000 82 AM12E-1212DH30-FZ 9-18 ±12 ±500 ±220 86 AM12E-1215DH30-FZ 9-18 ±15 ±400 ±200 85 AM12E-2405DH30-FZ 18-36 ±5 ±1200 ±1000 83 AM12E-2412DH30-FZ 18-36 ±12 ±500 ±220 87 AM12E-2415DH30-FZ 18-36 ±15 ±400 ±200 86 AM12E-4805DH30-FZ 36-75 ±5 ±1200 ±1000 83 AM12E-4812DH30-FZ 36-75 ±12 ±500 ±220 87 AM12E-4815DH30-FZ 36-75 ±15 ±400 ±200 86 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Filter Transient response time (50% load step) Start up time Absolute Maximum Rating Peak Input Voltage time Remote Control Pin www.aimtec.com F 051e R12 Nominal 12 24 48 12 Vin 24 Vin 48 Vin Typical 9-18 18-36 36-75 Maximum Units VDC π(PI ) 2000 µs 550 -0.7-25 -0.7-50 -0.7-100 ms 100 Open or 3.5V ~12V, <0.2mA Short or 0V ~ 1.2V, <3mA ON OFF Tel: +1 514 620 2722 1 of 4 VDC ms Vdc Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM12E-FZ 12 Watt | DC-DC Converter Input Specifications (continued) Parameters No Load Input Current Input reflected current Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Nominal Conditions Temperature coefficient Ripple & Noise Rising time Parameters Pin Out Specifications Pin 1 2 3 4 5 6 Single +V Input -V Input +V Output Trim -V Output Remote On/Off www.aimtec.com F 051e R12 Typical (full load) ±1 Continuous Auto Recovery 150 ±0.5 ±1 ±0.5 ±0.5 ±5 ±0.02 100 10 % of full load HL-LL 0% to 25% 25% to 100% Balanced Load (Dual) Unbalanced 25-100% FL 20MHz Bandwidth 3.3V model 5V model 12V model 15V model General Specifications Conditions Rated > 1000 500 Conditions Over Voltage Protection (Zener Diode) Switching frequency Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Potting Material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature 31 Typical 3 sec Parameters Load voltage regulation Maximum 130 Output Specifications Voltage accuracy Short Circuit protection Short circuit restart Over load protection Line voltage regulation Typical 100% load See derating chart Typical 300 -55 to +105 Units mA mAp-p Units 3000 VDC MOhm pF Maximum Units % % % % 3.9V 6.2V 15V 18V Maximum -40 to +85 Free air convection 100 % oC mVp-p ms VDC Units KHz o C o C o C 95 % Nickel coated copper UL94V-0 rated 30 g Tolerance ±0.5mm 2.00 x 1.00 x 0.40 inches 50.80 x 25.40 x 10.2 mm > 1,960,000 hrs. (MIL-HDBK -217F, Ground Benign, t=+25oC) o 1.5mm from case max 10 sec 260 C Dual +V Input -V Input +V Output Common. -V Output Remote On/Off Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM12E-FZ 12 Watt | DC-DC Converter 2.54 (0.10) Dimensions 50.80 (2.00) DIA 1.00 (0.04) 20.32 (0.80) 15.24 (0.60) 10.16 (0.40) 5 6 15.24 (0.60) Notes: All dimensions are typical in millimeters (inches). Tolerance ±0.5 (±0.02) 5.08 (0.20) Min 10.16 (0.40) Isolative Plastic base plate 4 10.16 (0.40) Bottom View 2 2.54 (0.10) 25.40 (1.00) 7.62 5.08 (0.31) (0.20) 1 2.54 (0.10) 10.16 (0.40) 3 Derating Free Air Convection 71 º C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 71 Ambient Temperature www.aimtec.com F 051e R12 Tel: +1 514 620 2722 3 of 4 80 85 100 ºC Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM12E-FZ 12 Watt | DC-DC Converter TRIM Function Vo+ TRIM Vo+ R1 TRIM Vo- Vo- AM12E-FZ TRIM DOWN AM12E-FZ TRIM UP 3.3 V Output Percentage R1 ( kΩ) 10% R2 5 V Output R2 ( kΩ) Percentage R1 ( kΩ) 0 10% 0 7.5% 7.83 7.5% 3.86 5% 28.25 5% 14.8 2.5% 89.49 2.5% 47.59 R2 ( kΩ) -10% 10.63 -10% 0 -7.5% 27.92 -7.5% 1.08 -5% 62.5 -5% 12.28 -2.5% 166.26 -2.5% 45.89 12 V Output Percentage R1 ( kΩ) 10% 15 V Output R2 ( kΩ) Percentage R1 ( kΩ) 0 10% 0 7.5% 4.74 7.5% 5.33 5% 16.11 5% 17 2.5% 50.22 2.5% 52 R2 ( kΩ) -10% 39.19 -10% 59 -7.5% 61.01 -7.5% 88.17 -5% 104.64 -5% 146.5 -2.5% 235.53 -2.5% 321.5 NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12 Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only