Series AM6T-VZ 6 Watt | DC-DC Converter FEATURES: Wide 2:1 input range 24 Pin DIP Package Metal package High efficiency up to 81% Operating temperature -40oC to + 85oC Input / Output isolation 1500 & 3500 VDC Pin compatible with multiple manufacturers Continuous short circuit protection Models Single output Model AM6T-1205S-VZ AM6T-1209S-VZ AM6T-1212S-VZ AM6T-1215S-VZ AM6T-1224S-VZ AM6T-2405S-VZ AM6T-2409S-VZ AM6T-2412S-VZ AM6T-2415S-VZ AM6T-2424S-VZ AM6T-4805S-VZ AM6T-4809S-VZ AM6T-4812S-VZ AM6T-4815S-VZ AM6T-4824S-VZ AM6T-1205SH35-VZ AM6T-1209SH35-VZ AM6T-1212SH35-VZ AM6T-1215SH35-VZ AM6T-1224SH35-VZ AM6T-2405SH35-VZ AM6T-2409SH35-VZ AM6T-2412SH35-VZ AM6T-2415SH35-VZ AM6T-2424SH35-VZ AM6T-4805SH35-VZ AM6T-4809SH35-VZ AM6T-4812SH35-VZ AM6T-4815SH35-VZ AM6T-4824SH35-VZ Input Voltage (V) Output Voltage (V) Output Current max (mA) Capacitive load, max (μF) Efficiency (%) 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 5 9 12 15 24 5 9 12 15 24 5 9 12 15 24 5 9 12 15 24 5 9 12 15 24 5 9 12 15 24 1200 666 500 400 250 1200 666 500 400 250 1200 666 500 400 250 1200 666 500 400 250 1200 666 500 400 250 1200 666 500 400 250 2200 470 470 470 220 2200 470 470 470 220 2200 470 470 470 220 2200 470 470 470 220 2200 470 470 470 220 2200 470 470 470 220 68 72 74 79 76 76 80 80 81 77 74 77 77 79 75 68 72 74 79 76 76 80 80 81 77 74 77 77 79 75 Input Voltage (V) Output Voltage (V) Capacitive load, max (μF) Efficiency (%) 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-72 36-72 ±5 ±9 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±24 ±5 ±9 Models Dual output Model AM6T-1205D-VZ AM6T-1209D-VZ AM6T-1212D-VZ AM6T-1215D-VZ AM6T-1224D-VZ AM6T-2405D-VZ AM6T-2409D-VZ AM6T-2412D-VZ AM6T-2415D-VZ AM6T-2424D-VZ AM6T-4805D-VZ AM6T-4809D-VZ www.aimtec.com F 051e R13.C Output Current max (mA) ±600 ±333 ±250 ±200 ±125 ±600 ±333 ±250 ±200 ±125 ±600 ±333 Tel: +1 514 620 2722 1 of 4 ±1000 ±220 ±220 ±220 ±100 ±1000 ±220 ±220 ±220 ±100 ±1000 ±220 78 78 78 80 78 76 77 80 80 78 74 76 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6T-VZ 6 Watt | DC-DC Converter Models Dual output (continued) Model Input Voltage (V) Output Voltage (V) 36-72 36-72 36-72 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±24 AM6T-4812D-VZ AM6T-4815D-VZ AM6T-4824D-VZ AM6T-1205DH35-VZ AM6T-1209DH35-VZ AM6T-1212DH35-VZ AM6T-1215DH35-VZ AM6T-1224DH35-VZ AM6T-2405DH35-VZ AM6T-2409DH35-VZ AM6T-2412DH35-VZ AM6T-2415DH35-VZ AM6T-2424DH35-VZ AM6T-4805DH35-VZ AM6T-4809DH35-VZ AM6T-4812DH35-VZ AM6T-4815DH35-VZ AM6T-4824DH35-VZ Output Current max (mA) Capacitive load, max (μF) ±250 ±200 ±125 ±600 ±333 ±250 ±200 ±125 ±600 ±333 ±250 ±200 ±125 ±600 ±333 ±250 ±200 ±125 ±220 ±220 ±100 ±1000 ±220 ±220 ±220 ±100 ±1000 ±220 ±220 ±220 ±100 ±1000 ±220 ±220 ±220 ±100 Efficiency (%) 76 78 77 78 78 78 80 78 76 77 80 80 78 74 76 76 78 77 Input Specifications Parameters Voltage Range Nominal Typical 12 24 48 9-18 18-36 36-72 12 Vin 24 Vin 48 Vin 20 -0.7-24 -0.7-40 -0.7-80 15 Units VDC (Pi) Network Filter Start up time Absolute Maximum Rating Maximum Peak Input Voltage time Ms VDC Ms Isolation Specifications Parameters Tested I/O voltage Conditions Typical 3 sec Resistance Capacitance Rated Units 1500 (3500 H35 model) VDC > 1000 60 MOhm pF Output Specifications Parameters Voltage accuracy Voltage balance Short circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise www.aimtec.com F 051e R13.C Conditions Typical Balanced Load ±1 ±1 Maximum Units % % Continuous Auto Recovery HL-LL 25-100% Load At 20MHz Bandwidth ±0.5 ±0.5 ±0.02 60 Tel: +1 514 620 2722 2 of 4 % % %/oC mV p-p Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6T-VZ 6 Watt | DC-DC Converter General Specifications Parameters Conditions Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight Dimensions(L x W x H) MTBF Typical Maximum Units 100 KHz o C o C o C 100-400 Full Load (see derating chart) -40 to +85 -40 to +125 Free air convection 95 % Nickel coated copper 15 G Tolerance ±0.5 mm or ±0.02 inches 1.25 x 0.8 x 0.4 inches 31.75 x 20.32 x 10.16 mm >2,200,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) Safety Specifications Parameters Standards Designed to meet IEC 60950-1 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Pin Out Specifications Pin 2 3 9 11 14 16 22 23 1500 and 3500VDC Single Dual -V Input -V Input No pin N.C. +V Output -V Output +V Input +V Input -V Input -V Input Common -V Output +V Output Common +V Input +V Input 3.05 (0.12) 10.16 (0.40) 20.32 (0.80) 15.24 (0.60) Dimensions www.aimtec.com F 051e R13.C Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM6T-VZ 6 Watt | DC-DC Converter Derating NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R13.C Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only