Series AM3D-Z 3 Watt | DC-DC Converter FEATURES: • • • • • • • • 7 pin SIP package High efficiency up to 90% Low profile plastic package RoHS compliant Operating temperature -40oC to + 85oC Short circuit protection Input / Output Isolation 1000, 3000 VDC Pin compatible with multiple manufacturers Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) AM3D-0505SZ AM3D-0509SZ AM3D-0512SZ AM3D-0515SZ AM3D-1205SZ AM3D-1209SZ AM3D-1212SZ AM3D-1215SZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 5 9 12 15 5 9 12 15 600 333 250 200 600 333 250 200 1000 1000 1000 1000 1000 1000 1000 1000 80 81 82 84 84 86 89 90 AM3D-0505SH30Z AM3D-0509SH30Z AM3D-0512SH30Z AM3D-0515SH30Z AM3D-1205SH30Z AM3D-1209SH30Z AM3D-1212SH30Z AM3D-1215SH30Z 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 5 9 12 15 5 9 12 15 600 333 250 200 600 333 250 200 3000 3000 3000 3000 3000 3000 3000 3000 80 81 82 84 84 86 89 90 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) AM3D-0505DZ AM3D-0509DZ AM3D-0512DZ AM3D-0515DZ AM3D-1205DZ AM3D-1209DZ AM3D-1212DZ AM3D-1215DZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±300 ±167 ±125 ±100 ±300 ±167 ±125 ±100 1000 1000 1000 1000 1000 1000 1000 1000 82 83 84 86 85 86 89 90 AM3D-0505DH30Z AM3D-0509DH30Z AM3D-0512DH30Z AM3D-0515DH30Z AM3D-1205DH30Z AM3D-1209DH30Z AM3D-1212DH30Z AM3D-1215DH30Z 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±300 ±167 ±125 ±100 ±300 ±167 ±125 ±100 3000 3000 3000 3000 3000 3000 3000 3000 82 83 84 86 85 86 89 90 Model Models Dual output Model NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com F 051e R12.A Tel: +1 514 620 2722 1 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3D-Z 3 Watt | DC-DC Converter Input Specifications Parameters Nominal Typical 5 12 Voltage range Maximum Units 4.5-5.5 10.8-13.2 Capacitor Filter Start up time VDC ms 5 12 Absolute Maximum Rating 9 15 VDC Peak Input Voltage time 100 ms Rated Units Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 3 sec 1000, 3000 >1000 60 VDC MOhm pF Output Specifications Parameters Conditions Voltage accuracy Line voltage regulation Load voltage regulation Temperature coefficient Short Circuit Protection Ripple & Noise Minimum Load Current Typical Maximum ±3 ±1.2 ±8 ±0.02 Momentary (1sec) 50 10 For 1.0% of Vin load 10~100% 20MHz Bandwidth Units % % of Vin % %/oC mV p-p % of Max General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Conditions Typical 100% load With Derating Above 71 oC (5V input models only) 70 Maximum Units KHz o C -40 to +85 o -40 to +125 C C %/ oC o 100 Free Air Convection 95 Non-conductive black plastic UL 94 V-0 2.8 0.76 x 0.28 x 0.37 inches 19.50 x 7.20 x 9.50 mm >1 800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5mm from case for 10 sec 260 % RH g o C Safety Specifications Parameters Standards NOTE: Designed to meet: IEC 60950-1: 2001, EN55022 (Radiated Emissions) class B, IEC61000-4-2(ESD), IEC61000-4-3(Radiated immunity) Pin Out Specifications Pin 1 2 4 5 6 1000Vdc Single Dual + V Input + V Input - V Input - V Input - V Output - V Output No pin Common + V Output + V Output www.aimtec.com F 051e R12.A 3000Vdc Single Dual + V Input + V Input - V Input - V Input No pin No pin - V Output - V Output No pin Common Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3D-Z 3 Watt | DC-DC Converter 7 No pin No pin + V Output + V Output Dimensions Derating 5V input models only NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.A Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only