Amphenol C 16-1 Catalogue ASA200005 Rev 1.A Interconnection Solution Guide Circular Connector Threaded Coupling – Plastic Designed to meet the high requirements of Industrial applications under harsh environment. Available in Screw; Solder and Crimp terminations. Materials Housing Dielectric Gasket Contact Plating Electrical - Polyamide 6.6 - Polyamide 6.6 - Neoprene - Silver Current Crimp Termination - See below Mechanical Durability Automatic Hand tool 3 + PE Screw Termination Part Numbers: Electrical Termination C - 500 Mating cycles C 16-1 Cable Connectors IP67 protection level Contacts - Consult representative - TA 0100 146 page X-1 Remarks *without contacts Orientation AWG V I 14 400 16 Straight Right Angle Solder Termination 18 250 10 Crimp Termination 16 200 13 6 + PE Straight Right Angle Straight Right Angle With Strain Relief Without Strain Relief With Strain Relief With Strain Relief Without Strain Relief With Strain Relief With Strain Relief * With Strain Relief * Ø 9mm Cable Outlet Male Female T3108 001 T3109 001 T3108 000 T3109 000 T3108 081 T3109 081 T3104 001 T3105 001 T3104 000 T3105 000 T3104 501 T3105 501 T3104 081 T3105 081 T3104 581 T3105 581 Ø 11mm Cable Outlet Male Female T3108 101 T3109 101 T3108 100 T3109 100 T3108 091 T3109 091 T3104 101 T3105 101 T3104 100 T3105 100 T3104 601 T3105 601 T3104 091 T3105 091 T3104 591 T3105 591 C 16-1 Receptacle Connectors IP67 protection level 3 + PE Screw Termination Solder Termination Crimp Termination 6 + PE 14 18 16 400 250 200 16 10 13 With Contacts With Contacts Without Contacts Panel Mount T3111 000 T3107 000 T3107 500 C 16-1 Accessories Item Cap Back shell Strain relief Description Male cable connector Female receptacle Straight 10 pieces per pack Straight with strain relief 13.5mm Ø Right angle with strain relief 12mm Ø cable T6482 001 T6483 001 T3102 003 7 X T3102 004 7 X T3102 005 7 X T3102 015 7 X T3102 014 7 X N16 110 2000 X C 16-1 Crimp Contacts for 0.14 ~ 0.5mm² Pack of 100 single contacts Silver Plated Gold Plated Pin Socket Pin Socket VN010160011(1) VN020160003(1) VN010160011(2) VN020160003(2) Reel of 2000 Silver Plated Gold Plated Pin Socket Pin Socket HN010160011(1) HN020160003(1) HN010160011(2) HN020160003(1) C 16-1 Crimp Contacts for 0.5 ~ 1.5mm² Pack of 100 single contacts Silver Plated Gold Plated Pin Socket Pin Socket VN010160004(1) VN020160002(1) VN010160004(2) VN020160002(2) Reel of 2000 Silver Plated Gold Plated Pin Socket Pin Socket HN010160004(1) HN020160002(1) HN010160004(1) HN020160002(1) C 16-1 is available in reverse polarity – consult representative Insert arrangements Typical straight & right angle Plug assemblies Typical straight Plug dimensions Typical right angle Plug dimensions Typical panle mount Receptacle For further variations and information, consult representative Amphenol South Africa Tel: +27 11 305 9574 Fax: +27 11 305 9576 Specifications are subject to change without notice http://www.amphenol.co.za e-mail: [email protected] All dimensions in mm. P/B – Phosphor Bronze. Ni – Nickel. µ” – Micro inches. C-8 ATE Amphenol C 16-3 Catalogue ASA200005 Rev 1.A Interconnection Solution Guide Circular Connector Bayonet Coupling – Plastic IP65 Designed to meet the high requirements of Industrial applications under harsh environment. Available in Screw and Crimp terminations. Materials C Housing Dielectric Gasket Contact Plating Electrical - Polyamide 6.6 - Polyamide 6.6 - Neoprene - Silver Current Crimp Termination - See below Automatic Hand tool Mechanical Durability - 500 Mating cycles C 16-3 Cable Connectors Contacts Part Numbers: Electrical Termination V Ø 16mm Cable Outlet Orientation I (A) Straight Right Angle 4 x 500V 4 x 21A Straight 12 + PE Crimp Termination* 9 x 300V 9 x 11A Right Angle 4 x 11A Straight 14 + PE Crimp Termination* 400V 11 x 12A Right Angle Straight 19 + PE Crimp Termination* 250V 7A Right Angle * Supplied without contacts. Crimp terminals must be ordered separately, see C16-3 Crimp Contacts 5 + PE Screw Termination - Consult representative - TA 0100 146 page X-1 400V 21A Male C016 20I005 104 2 C016 20K005 104 2 C016 10I012 004 2 C016 10K012 004 2 C016 10I014 004 2 C016 10K014 004 2 C016 10I019 004 2 C016 20K019 004 2 Female C016 20E005 104 2 C016 20F005 104 2 C016 10E012 004 2 C016 10F012 004 2 C016 10E014 004 2 C016 10F014 004 2 C016 10E019 004 2 C016 10F019 004 2 C 16-3 Receptacle Connectors 5 + PE Screw Termination 12 + PE Crimp Termination* 400V 4 x 500V 9 x 300V 21A 4 x 21A 9 x 11A Panel Mount 4 x 11A 14 + PE Crimp Termination* 400V 11 x 12A 19 + PE Crimp Termination* 250V 7A * Supplied without contacts. Crimp terminals must be ordered separately, see C16-3 Crimp Contacts C016 20G005 100 2 C016 10G012 000 2 C016 10G014 000 2 C016 10G019 000 2 C 16-3 Accessories Item Cap Tool Description Cable connector Female receptacle Disassembly tool for pin and socket inserts C016 00U000 010 2 C016 00V000 010 2 C016 00V000 000 2 FH 0002-016 C 16-3 Crimp Contacts Pack of 100 single contacts Silver Plated*1 Housing Contacts/housing Wire range Pin Socket 4 0.5 ~ 1.5mm² VN 01 025 0001 (101) VN 02 025 0001 (101) or 4 1.5 ~ 2.5mm² VN 01 025 0010 (101) VN 02 025 0010 (101) 12 + PE 9 0.14 ~ 0.5mm² VN 01 016 0003 (1) VN 02 016 0003 (1) or 9 0.5 ~ 1.5mm² VN 01 016 0002 (1) VN 02 016 0002 (1) or 9 1.5 ~ 2.5mm² VN 01 016 0005 (1) VN 02 016 0005 (1) 4 0.14 ~ 0.5mm² VN 01 015 0005 (1) VN 02 015 0005 (1) or 4 0.5 ~ 1.0mm² VN 01 015 0039 (1) VN 02 015 0039 (1) 14 + PE 11 0.14 ~ 0.5mm² VN 01 016 0003 (1) VN 02 016 0003 (1) or 11 0.5 ~ 1.5mm² VN 01 016 0002 (1) VN 02 016 0002 (1) or 11 1.5 ~ 2.5mm² VN 01 016 0005 (1) VN 02 016 0005 (1) 20 0.14 ~ 0.5mm² VN 01 015 0005 (1) VN 02 015 0005 (1) 19 + PE or 20 0.5 ~ 1.0mm² VN 01 015 0039 (1) VN 02 015 0039 (1) 1 * For Gold Plated contacts replace (1) with (2) and (101) with (102) C16-3 is available in reverse gender – consult representative Reel of 2000 Silver Plated*1 Pin HN 01 025 0001 (1) HN 01 025 0010 (1) HN 01 016 0003 (1) HN 01 016 0002 (1) HN 01 016 0005 (1) HN 01 015 0005 (1) HN 01 015 0039 (1) HN 01 016 0003 (1) HN 01 016 0002 (1) HN 01 016 0005 (1) HN 01 015 0005 (1) HN 01 015 0039 (1) Socket HN 02 025 0001 (1) HN 02 025 0010 (1) HN 02 016 0003 (1) HN 02 016 0002 (1) HN 02 016 0005 (1) HN 02 015 0005 (1) HN 02 015 0039 (1) HN 02 016 0003 (1) HN 02 016 0002 (1) HN 02 016 0005 (1) HN 02 015 0005 (1) HN 02 015 0039 (1) Typical straight & right angle Plug assemblies 5 + PE 12 + PE 14 + PE Panel Cut-out 19 + PE Typical Connector dimensions Insert arrangements For further variations and information, consult representative Amphenol South Africa Tel: +27 11 305 9574 Fax: +27 11 305 9576 Specifications are subject to change without notice http://www.amphenol.co.za e-mail: [email protected] All dimensions in mm. P/B – Phosphor Bronze. Ni – Nickel. µ” – Micro inches. C-9 ATE Amphenol C 091 Interconnection Solution Guide Catalogue ASA200005 Rev 1.A Miniature Circular Connectors – EMI Shielded Range C 091 A C 091 B C 091 D Coupling Threaded Bayonet Threaded Strain relief Internal Internal Internal Coloured Backshells Yes Yes Yes IP rating 40 40 67 Housing Die Cast Die Cast Ni Plated Die Cast Ni Plated Dielectric Thermoplastic Thermoplastic Thermoplastic Materials Seal Neoprene Coupler Die Cast Thermoplastic Die Cast Ni Plated Durability - cycles 500 500 500 Solder Cable Connector with 6mm cable outlet – Crimp available from 3 to 8 position, consult representative Part Number Contacts V I (A) Male Female Male Female Male Female Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle 3 DIN 4 IEC 300 5 5 S DIN 150 6 DIN 5 300 7 7 DIN 8 DIN 150 12 3 14 T3260 001 T3260 005 T3300 001 T3300 005 T3360 001 T3360 005 T3360 010 T3356 005 T3400 001 T3400 005 T3475 001 T3475 005 T3484 001 T3484 005 T3504 001 T3504 005 T3635 001 T3635 005 T3650 001 T3650 005 T3261 001 T3261 005 T3301 001 T3301 005 T3361 001 T3361 005 T3361 010 T3357 005 T3401 001 T3401 005 T3476 001 T3476 005 T3485 001 T3485 005 T3505 001 T3505 005 T3636 001 T3636 005 T3651 001 T3651 005 T3274 501 T3274 005 T3324 501 T3324 005 T3374 501 T3374 005 T3394 501 T3394 005 T3424 501 T3424 005 T3434 501 T3434 005 T3444 501 T3444 005 T3524 501 T3524 005 T3624 501 T3624 005 T3644 501 T3644 005 T3278 501 C091 31H003 1002 C091 31D003 1002 T3328 501 C091 31H004 1002 C091 31D004 1002 T3378 501 C091 31H005 1002 C091 31D005 1002 T3398 501 C091 31H105 1002 C091 31D105 1002 T3428 501 C091 31H006 1002 C091 31D006 1002 T3438 501 C091 31H007 1002 C091 31D007 1002 T3448 501 C091 31H107 1002 C091 31D107 1002 T3528 501 C091 31H008 1002 C091 31D008 1002 T3628 501 C091 31H012 2002* C091 31D012 2002* T3648 501 C091 31H014 2002* C091 31D014 2002* Female Receptacle Connector Contacts V 3 DIN 4 IEC 5 5 S DIN 6 DIN 7 7 DIN 8 DIN 12 14 * Only available in gold plated contacts I (A) 300 150 C 5 300 150 3 Panel Mount Solder silver contacts R/A PCB With Boardlock gold contacts Panel Mount Solder silver contacts T3263 000 T3303 000 T3363 000 T3363 010 T3403 000 T3478 000 T3487 000 T3507 000 T3638 000 T3653 000 T3263 900 T3277 100 T3327 100 T3377 100 T3397 100 T3427 100 T3437 100 T3447 100 T3527 100 T3627 100 T3647 100 T3359 900 T3487 900 T3507 900 Part Number R/A PCB With Boardlock silver contact T3277 600 T3377 600 T3397 600 T3427 600 Reverse gender and Crimp types are available, consult representative or catalogue ATE 2071 08.98 5000 (ATE) Panel Mount Solder silver contacts Flange Mount Solder silver contact C091 31N003 1002 C091 31T003 1002 C091 31N004 1002 C091 31T004 1002 C091 31N005 1002 C091 31T005 1002 C091 31N105 1002 C091 31T105 1002 C091 31N006 1002 C091 31T006 1002 C091 31N007 1002 C091 31T007 1002 C091 31N107 1002 C091 31T107 1002 C091 31N008 1002 C091 31T008 1002 C091 31N012 2002* C091 31T012 2002* C091 31N014 2002* C091 31T014 2002* * Only available in gold plated contacts Typical C091 D Cable Connector Typical R/A C091 A assembly Typical R/A C091 B Cable Connector Insert arrangements 3 4 5 5 Stereo 6 7 7 8 12 Typical C091 A Panel mount 14 For further variations and information, consult representative Amphenol South Africa Tel: +27 11 305 9574 Fax: +27 11 305 9576 Specifications are subject to change without notice http://www.amphenol.co.za e-mail: [email protected] All dimensions in mm. P/B – Phosphor Bronze. Ni – Nickel. µ” – Micro inches. C-10 ATE Amphenol QUELARC® Catalogue ASA200005 Rev 1.A Interconnection Solution Guide Heavy Duty Connector System Built to withstand the most severe operating conditions. Features Compound Circuit Breaking Arc Chambers confining arcs during initial break. Materials Receptacles C – Rust Resistant Ferrous Alloy – Aluminum Alloy Plug Electrical Current Voltage Features Options Grounding contact – MFBL UL & CSA Certification Flat Long Life Contacts Solder Contacts Reverse Polarity Automatic & Remote Control Contacts T & D Handles Cord Grips Various Insert Arrangements – Up to 200 Amp – 250DC/600VAC Conduit Hub Size Mating Halves 100 Amp 3-Pole/4 Wire Grounded thru Shell and Extra Pole Receptacles Straight Housing Panel Mount w/Gasket Option Option Part Number: Part Number: Angle Housing (as per drawing) Option Part Number: 38.1mm W/ Spring Door JRCBB-510446 W/ Spring Door JRCA-510446 W/ Spring Door JRC-4104 Threaded JRLBB-510446 Threaded JRLA-510446 Threaded JRL-4104 JREBB-510446 Threaded & Cap JREA-510446 Threaded & Cap Threaded & Cap JRE-4104 Plug Straight Cable ØD Range Part Number: JPD-1110446 25.4~34.9mm JPD-1410446 34.9~44.5mm JPLD-1110446 25.4~34.9mm JPLD-1410446 34.9~44.5mm JPLD-1110446 25.4~34.9mm JPLD-1410446 34.9~44.5mm Diagram Typical Receptacle with Angled Housing & Spring Door Typical Threaded Straight Housing for Plug with Coupling Nut Typical Plug without Coupling Nut (JPD prefix) (JPLD = Plug with Coupling Nut) Part Number: Description Cable ØD Range In-Line Connector Plug & Receptacle SET with Threaded Coupling mechanism 25.4~34.9mm JRKD-1110446 34.9~44.5mm JRKD-1410446 44 Series Typical Threaded Panel Mount Receptacle for Plug with Coupling Nut Insert Arrangement Economy Series Environmentally Sealed Circular Connectors Amphenol’s 44 Series connector system offer high performance at low cost. Ideal for applications requiring environmentally sealed connectors. Materials Electrical Insulation Contact Plating Colour – 94V-0 Santoprene – Copper Alloy – Electrotin – Black Characteristics Wire Gauge Insulation Diameter Temperature Coupling Protection – 18 ~ 14 AWG – 2.03 ~ 3.30 mm – -40ºC ~ 105ºC – Push Pull – IP65 Related Information Current Rating Voltage Rating Resistance Contact Insulation Dielectric Withstand – 8 Amps – 250 VAC rms – < 30 mΩ – > 5,000 MΩ – 1000 VRMS Customer Options Shell sizes Contact arrangements Circuit sizes –5 –6 –1~6 Full Cycle Tool Economy Crimping Tool – 357-588 – 357-561 Applications Truck Accessories Marine Industrial Traffic Control Automotive Safety Mining Ventilation Housings Part Numbers: No. of Contacts Mating Halves Receptacle 44-104-10001-02 44-104-10002-02 44-104-10003-02 44-104-10004-02 44-104-10005-02 44-104-10006-02 1 2 3 4 5 6 Plug 44-103-10001 44-103-10002 44-103-10003 44-103-10004 44-103-10005 44-103-10006 Receptacle Crimp Contacts Plug Part Number: Reel Quantity Pin Contacts 44-100-1414P-1H* 44-100-1414P-1K* 100 1000 Socket Contacts 44-102-1414S-1H* 44-102-1414S-1K* * Add suffix (101) to Crimp Contact part numbers to have contacts removed from the reels and package in bags. Insert Arrangements Contact ØD 1 12.62 Mated No. of Contacts 2 15.41 3 17.98 4 20.80 5 20.80 6 23.69 1 2 3 4 5 6 Dimensions A (mm) 12.62 15.41 17.98 20.80 20.80 23.69 B (mm) 11.17 11.93 14.47 17.32 17.32 20.21 For further variations and information, consult representative Amphenol South Africa Tel: +27 11 305 9574 Fax: +27 11 305 9576 Specifications are subject to change without notice http://www.amphenol.co.za e-mail: [email protected] All dimensions in mm. P/B – Phosphor Bronze. Ni – Nickel. µ” – Micro inches. C-11 Sine*Pyle/APSO