Microwave Amplifier 19 GHz to 27 GHz Model BXHF1068 FEATURES • Output Power @ 1dB Comp.: +28 dBm • Reverse Bias Protection • Input Voltage Regulator • Laser Sealed Housing • Input RF Surge Protection The Model BXHF1068 is standard high frequency amplifier covering 19 GHz to 27 GHz. This three stage design, utilizes an input voltage regulator to protect against fluctuations in supply voltage, reverse bias protection circuitry, and a laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version as a model SXHF1068. All specification ratings are based on measurements in a 50 ohm system with a DC supply voltage tolerance of +/- 2%. Parameter Typical Min. / Max. Frequency Range Gain .Pout @ 1 dB Compression 19 GHz to 27 GHz 45 dB +28 dBm 19 GHz to 27 GHz 43 dB +27 dBm Input VSWR Output VSWR 1.5:1 1.5:1 2.0:1 Max. 2.0:1 Max. 3rd Order Output Intercept Point 2nd Order Output Intercept Point +36 dBm +46 dBm - Noise Figure Supply Voltage Supply Current 4.5 dB +12 to +15 volts 800 mA 6.0 dB +12 to +15 volts 850 mA Max. Revision: 12/10/2012 Housing Size RF Connectors Operating Case Temp. (Min./Max. Values) Typical values are measured at 25°C but not guaranteed. 1.970" L x 0.890" W x 0.290" H Gold Plated Pins or SMA Female -20°C to +70°C Maximum (No Damage) Ratings Storage Temperature Operating Temperature (Case) DC Voltage @ 25°C Input Drive @ 25°C (CW) -65°C to +125°C -40°C to +85°C +17 VDC +20 dBm Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com Microwave Amplifier 19 GHz to 27 GHz Model BXHF1068 Outline Drawing (080-22781 Package) Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com