ASW234 5-8000 MHz MMIC Amplifier Features Description ·16.8 dB Gain at 2 GHz The ASW234, a power amplifier MMIC, has a high linearity, high gain, and high efficiency over a wide range of frequency, being suitable for use in both receiver and transmitter of telecommunication systems up to 6 GHz. The amplifier is available in an SOT-363 package and passes through the stringent DC, RF, and reliability tests. ·22 dBm P1dB at 2 GHz ·31 dBm Output IP3 at 2 GHz ·1.8 dB NF at 2 GHz ·MTTF > 100 Years ·Single Supply Package Style: SOT-363 Typical Performance Parameters Frequency Units Application Circuit Typical MHz 900 2000 2700 3500 5500 Gain dB 18.7 16.8 15.5 13.5 10 ·500 ~ 3500 MHz ·500 ~ 3500 MHz (4.7 V) S11 dB -10 -11 -15 -15 -12 ·500 ~ 3500 MHz (3 V) S22 dB -18 -18 -15 -12 -10 ·IF Output IP31) dBm 29.5 31 31.5 31 28 ·DVB-T (V/U band) Noise Figure dB 1.9 1.8 1.9 2.2 3.3 ·5000 ~ 6000 MHz Output P1dB dBm 22 22 20.5 18.5 14.5 Current mA 55 55 55 55 55 V 5 5 5 5 5 Device Voltage 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Product Specifications Parameters Testing Frequency Units Min Typ MHz 2000 Gain dB 16.8 S11 dB -11 S22 dB -18 dBm 31 Noise Figure dB 1.8 Output P1dB dBm 22 Current mA 55 V 5 Output IP3 Device Voltage Max Absolute Maximum Ratings Parameters Pin Configuration Rating Operating Case Temperature -40 to +85°C Pin No. Function Storage Temperature -40 to +150°C 1 RF OUT / Bias 2,3,5,6 GND 4 RF IN Device Voltage +5 V Operating Junction Temperature +150°C Input RF Power (Continuous) 22 dBm * Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf 1/8 ASB Inc. · [email protected] · Tel: +82-42-528-7223 February 2010 ASW234 5-8000 MHz MMIC Amplifier Outline Drawing Symbols A A1 A2 b C D F E1 e e1 L MIN 0.90 0.025 0.875 0.20 0.10 1.90 1.15 2.00 ---- Dimensions (In mm) NOM 1.00 0.062 0.937 0.30 0.125 2.00 1.25 2.10 0.65BSC 1.30BSC 0.425REF MAX 1.10 0.10 1.00 0.40 0.15 2.10 1.35 2.20 ---- Pin NO. Function Pin NO. Function. 1 RF OUT / Bias 4 RF IN 2 GND 5 GND 3 GND 6 GND Mounting Recommendation (in mm) Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of lead pin 2 for better RF and thermal performance, as shown in the drawing at the left side. ESD Classification & Moisture Sensitivity Level ESD Classification HBM Class 1A Voltage Level: 400 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260°C reflow 2/8 ASB Inc. · [email protected] · Tel: +82-42-528-7223 February 2010 ASW234 5-8000 MHz MMIC Amplifier APPLICATION CIRCUIT Frequency (MHz) 900 2000 2700 3500 Magnitude S21 (dB) 18.7 16.8 15.5 13.5 Magnitude S11 (dB) -10 -11 -15 -15 Magnitude S22 (dB) -18 -18 -15 -12 18.5 Output P1dB (dBm) 22 22 20.5 500 ~ 3500 MHz Output IP31) (dBm) 29.5 31 31.5 31 +5 V Noise Figure (dB) 1.9 1.8 1.9 2.2 Device Voltage (V) 5 5 5 5 Current (mA) 55 55 55 55 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vcc=5 V C4=1 mF C3=100 pF C1=56 pF 2 mm RF IN L1=33 nH ASW234 C2=56 pF RF OUT L2=18 nH 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 0 -15 -20 0 500 1000 1500 2000 2500 3000 3500 -25 0 500 1000 Frequency (MHz) 1500 2000 2500 3000 3500 2500 3000 3500 Frequency (MHz) 0 5 -5 4 Stability Factor S22 (dB) -10 -15 -20 2 1 -25 -30 3 0 500 1000 1500 2000 2500 3000 3500 0 0 500 Frequency (MHz) 3/8 1000 1500 2000 Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 February 2010 ASW234 5-8000 MHz MMIC Amplifier APPLICATION CIRCUIT Frequency (MHz) 900 2000 2700 3500 Magnitude S21 (dB) 17.8 16.2 15 13.5 Magnitude S11 (dB) -9 -12 -18 -12 Magnitude S22 (dB) -15 -18 -14 -12 19.5 Output P1dB (dBm) 21 21 19.5 500 ~ 3500 MHz Output IP31) (dBm) 26 29 30 31 +4.7 V Noise Figure (dB) 1.8 1.8 1.9 2.2 Device Voltage (V) 4.7 4.7 4.7 4.7 Current (mA) 35 35 35 35 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vcc=4.7 V C4=1 mF C3=100 pF C1=56 pF 2 mm RF IN L1=33 nH ASW234 C2=56 pF RF OUT L2=18 nH 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 0 -15 -20 0 500 1000 1500 2000 2500 3000 3500 -25 0 500 1000 Frequency (MHz) 5 -5 4 Stability Factor 0 S22 (dB) -10 -15 -20 -25 2000 2500 3000 3500 3 2 1 0 500 1000 1500 2000 2500 3000 3500 0 0 500 Frequency (MHz) 4/8 1500 Frequency (MHz) 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 February 2010 ASW234 5-8000 MHz MMIC Amplifier APPLICATION CIRCUIT Frequency (MHz) 900 2000 2700 3500 Magnitude S21 (dB) 18.8 16.5 14.8 12.5 Magnitude S11 (dB) -11 -14 -18 -13 Magnitude S22 (dB) -18 -16 -14 -18 16.5 Output P1dB (dBm) 16.5 17 15.5 500 ~ 3500 MHz Output IP31) (dBm) 31 32 34 31 +3 V Noise Figure (dB) 2.2 2.2 2.4 2.6 Device Voltage (V) 3 3 3 3 Current (mA) 53 53 53 53 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vcc=3 V C4=1 mF C3=100 pF R1=6.8 kW C1=56 pF RF IN L1=39 nH 2 mm ASW234 C2=56 pF RF OUT L2=18 nH 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 0 -15 -20 0 500 1000 1500 2000 2500 3000 3500 -25 0 500 1000 Frequency (MHz) 1500 2000 2500 3000 3500 Frequency (MHz) 5 0 -5 4 Stability Factor S22 (dB) -10 -15 -20 2 1 -25 -30 3 0 0 500 1000 1500 2000 2500 3000 3500 0 500 Frequency (MHz) 5/8 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 February 2010 ASW234 5-8000 MHz MMIC Amplifier APPLICATION CIRCUIT IF 50 ~ 450 MHz +5 V Frequency (MHz) 70 150 300 Magnitude S21 (dB) 21 20 19.5 Magnitude S11 (dB) -5 -8 -9 Magnitude S22 (dB) -13 -16 -18 Output P1dB (dBm) 21.5 21.5 21.5 Output IP31) (dBm) 27 28 29 Noise Figure (dB) 2.8 2.2 2.1 Device Voltage (V) 5 5 5 Current (mA) 55 55 55 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vcc=5 V C4=1 mF C3=100 pF C1=0.1 mF 2 mm RF IN L1=1 mH ASW234 C2=0.1 mF RF OUT L2=680 nH S-parameters & K-factor 25 0 20 15 S11 (dB) Gain (dB) -5 10 -10 -15 5 0 0 100 200 300 400 500 -20 0 100 200 Frequency (MHz) 5 -5 4 Stability Factor 0 S22 (dB) -10 -15 -20 -25 400 500 3 2 1 0 100 200 300 400 500 0 0 500 Frequency (MHz) 6/8 300 Frequency (MHz) 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 February 2010 ASW234 5-8000 MHz MMIC Amplifier APPLICATION CIRCUIT Frequency (MHz) 170 860 Magnitude S21 (dB) 18 16 Magnitude S11 (dB) -5 -7 Magnitude S22 (dB) -13 -15 DVB-T ( V / U band) Output P1dB (dBm) 20 20 170 ~ 860 MHz Output IP31) (dBm) 23.5 23.5 Noise Figure (dB) 1.7 2.1 Device Voltage (V) 4.5 4.5 Current (mA) 25 25 +4.5 V 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1 MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vcc=5 V C4=1 mF C3=100 pF C1=1000 pF RF IN L1=100 nH ASW234 C2=1000 pF RF OUT L2=680 nH 20 5 15 0 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 0 -5 -10 0 200 400 600 800 1000 -15 0 200 400 Frequency (MHz) 5 -5 4 Stability Factor 0 S22 (dB) -10 -15 -20 -25 800 1000 3 2 1 0 0 200 400 600 800 1000 0 500 Frequency (MHz) 7/8 600 Frequency (MHz) 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 February 2010 ASW234 5-8000 MHz MMIC Amplifier Frequency (MHz) APPLICATION CIRCUIT 5000 5500 6000 Magnitude S21 (dB) 10 10 9.7 Magnitude S11 (dB) -10 -12 -15 Magnitude S22 (dB) -10 -10 -13 Output P1dB (dBm) 15 14.5 14 5000 ~ 6000 MHz Output IP31) (dBm) 27 28 24.5 +5 V Noise Figure (dB) 2.8 3.3 3.9 Device Voltage (V) 5 5 5 Current (mA) 55 55 55 1) OIP3 is measured with two tones at an output power of +0 dBm/tone separated by 1MHz. 2 Board Layout (FR4, 40x40 mm , 0.8T) Schematic Vcc=5 V C4=1 mF C3=100 pF C1=10 pF 2 mm RF IN L1=5.6 nH ASW234 C2=10 pF RF OUT L2=12 nH 20 0 15 -5 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 0 4000 -10 -15 4500 5000 5500 6000 6500 7000 -20 4000 4500 5000 Frequency (MHz) 5500 6000 6500 7000 Frequency (MHz) 5 0 4 Stability Factor S22 (dB) -5 -10 3 2 -15 1 -20 4000 0 4500 5000 5500 6000 6500 7000 0 500 Frequency (MHz) 8/8 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. · [email protected] · Tel: +82-42-528-7223 February 2010