HDSP-390x Series
20 mm (0.8 inch) Seven Segment Displays
Data Sheet
HDSP-390x Series
HDSP-420x Series
HDSP-860x Series
HDSP-N15x Series
Description
Features
The 20 mm (0.8 inch) LED seven segment displays are
designed for viewing distances up to 10 metres (33 feet).
These devices use an industry standard size package and
pinout. All devices are available as either common anode
or common cathode.
x Industry standard size
x Industry standard pinout
15.24 mm (0.6 in.) DIP leads on 2.54 mm (0.1 in.)
centers
Applications
x Choice of Colors
AlGaAs Red, High Efficiency Red, Yellow, Green
These displays are ideal for most applications. Pin for pin
equivalent displays are also available in a low current
design. The low current displays are ideal for portable
applications. For additional information see the Low Current Seven Segment Displays data sheet.
x Excellent appearance
Evenly lighted segments
Mitered corners on segments
Gray package gives optimum contrast
±50° viewing angle
x Design flexibility
Common anode or common cathode
Left and right hand decimal points
x Categorized for luminous intensity
Yellow and green categorized for color
Use of like categories yields a uniform display
x High light output
x High peak current
x Excellent for long digit string multiplexing intensity
and color selection option
See Intensity and Color Selected Displays Data Sheet
x Sunlight viewable AlGaAs
Devices
AlGaAs[1]
HDSP-
HER
HDSP-
N150
3900
N151
3901
4201
N153
3903
4203
3905
Yellow
HDSP-
Green
HDSP-
Description
Package
Drawing
Common Anode Left Hand Decimal
A
8601
Common Anode Right Hand Decimal
B
8603
Common Cathode Right Hand Decimal
C
Common Cathode Left Hand Decimal
D
Notes:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-N10x AlGaAs data sheet for low current operation.
Part Numbering System
5082 - X X X X - X X X X X
HDSP- X X X X - X X X X X
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Z: Color Bins 2- and 3+ Only (applicable for Yellow devices only)
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
0: Common Anode
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
N: 20 mm (0.8 inch) Single Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago
representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube
(exceptions may apply). Please refer to respective datasheet for specific bin limit information.
2
Package Dimensions
11.07
(0.436)
11.07
(0.436)
8
20.32
(0.800)
1
2
3
4
5
6
7
8
9
18
17
16
15
14
13
12
11
10
8
10.16
(0.400)
1
2
3
4
5
6
7
8
9
13.08
(0.515)
27.69 0.25
(1.090 0.010)
LHDP
18
17
16
15
14
13
12
11
10
NOTE 4
NOTE 4
1.27
(0.050)
1.27
(0.050)
CL
CL
RHDP
8.25
(0.325)
8.25
(0.325)
CHARACTER
CL
FUNCTION
CHARACTER
CL
PIN
PACKAGE
PACKAGE
FRONT VIEW A, D
FRONT VIEW B, C
LUMINOUS
INTENSITY
CATEGORY
19.96 MAX.
(0.786)
0.51
(0.020)
5.08
(0.200)
COLOR
BIN
B
C
D
1
NO PIN
NO PIN
NO PIN
NO PIN
2
CATHODE a
CATHODE a
ANODE a
ANODE a
3
CATHODE f
CATHODE f
ANODE f
ANODE f
4
ANODE[3]
ANODE[3]
CATHODE[6]
CATHODE[6]
5
CATHODE e
CATHODE e
ANODE e
ANODE e
6
ANODE[3]
ANODE[3]
CATHODE[6]
CATHODE[6]
7
CATHODE dp
NO CONNEC.
NO CONNEC.
ANODE dp
8
NO PIN
NO PIN
NO PIN
NO PIN
9
NO PIN
NO PIN
NO PIN
NO PIN
10
NO PIN
CATHODE dp
ANODE dp
NO PIN
11
CATHODE d
CATHODE d
ANODE d
ANODE d
12
ANODE[3]
ANODE[3]
CATHODE[6]
CATHODE[6]
13
CATHODE c
CATHODE c
ANODE c
ANODE c
14
CATHODE g
CATHODE g
ANODE g
ANODE g
15
CATHODE b
CATHODE b
ANODE b
ANODE b
16
NO PIN
NO PIN
NO PIN
NO PIN
17
ANODE[3]
ANODE[3]
CATHODE[6]
CATHODE[6]
18
NO PIN
NO PIN
NO PIN
NO PIN
*
W
8.38 0.25
(0.330 0.010)
A
PINS 2 & 17
HDSP-39xx
XYY Z
6.1 MIN.
(0.240)
1.02
(0.040)
0.38 (0.015)
2.54 0.25
(0.100 0.010)
15.24 0.25
(0.600 0.010)
DATE CODE
END VIEW
NOTES:
1. DIMENSIONS IN MILLIMETERS AND (INCHES).
2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.
3. REDUNDANT ANODES.
4. UNUSED dp POSITION.
5. SEE INTERNAL CIRCUIT DIAGRAM.
6. REDUNDANT CATHODES.
7. FOR HDSP-420x/-860x SERIES PRODUCT ONLY.
SIDE VIEW
THE SIDE VIEW OF PACKAGE
*INDICATES
COUNTRY OF ORIGIN.
Internal Circuit Diagram
1
18
1
17
2
16
3
15
4
5
14
5
13
6
13
6
7
12
7
12
7
11
8
11
8
11
8
10
9
10
9
10
9
18
1
17
2
16
3
15
4
14
5
13
6
7
12
8
a
2
f
3
b
4
5
6
9
g
e
c
dp
d
A
3
a
f
b
g
e
c
dp
d
B
18
1
17
2
16
3
15
4
14
a
f
b
g
c
e
dp
d
C
18
a
17
f
b
g
16
15
14
e
c
13
12
11
dp
d
D
10
Absolute Maximum Ratings
AlGaAs Red
HER
Yellow
Green
HDSP-N150
HDSP-3900
HDSP-420x
HDSP-860x
Series
Series
Series
Series
Units
96
105
105
105
mW
Peak Forward Current per
Segment or DP
160[1]
135[3]
135[3]
90[5]
mA
DC Forward Current per
40[2]
40[4]
40[4]
30[6]
mA
–40 to +100
°C
Description
Average Power per Segment or DP
Segment or DP
Operating Temperature Range
Storage Temperature Range
–20 to +100[7]
–40 to +100
–55 to +100
°C
Reverse Voltage per Segment or DP
3.0
V
Wave Soldering Temperature for
3 Seconds (1.60 mm [0.063 in.]
below body)
250
°C
Notes:
1. See Figure 2 to establish pulsed conditions.
2. Derate above 55°C at 0.8 mA/°C.
3. See Figure 7 to establish pulsed conditions.
4. Derate above 50°C at 0.73 mA/°C.
5. See Figure 8 to establish pulsed conditions.
6. Derate above 50°C at 0.54 mA/°C.
7. For operation below –20°C, contact your local Avago components sales office or an authorized distributor.
4
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device
Series
Parameter
Luminous Intensity/Segment[1,2,5]
Symbol
Min.
Typ.
IV
6.0
Max.
Units
Test Conditions
14.0
mcd
IF = 20 mA
1.8
V
IF = 20 mA
V
IF = 100 mA
(Digit Average)
Forward Voltage/Segment or DP
VF
HDSPN15x
2.0
Peak Wavelength
OPEAK
Dominant Wavelength[3]
Od
Reverse Voltage/Segment or DP[4]
VR
3.0
3.0
645
nm
637
nm
15
V
Temperature Coefficient of
VF /Segment or DP
'VF/°C
-2
mV/°C
Thermal Resistance LED
Junction-to-Pin
RTJ-PIN
430
°C/W/
Seg
IR = 100 PA
High Efficiency Red
Device
Series
HDSP390x
5
Parameter
Symbol
Min.
Typ.
Units
Test Conditions
3350
7000
Max.
Pcd
4800
Pcd
IF = 100 mA Peak:
1 of 5 df
IF = 20 mA
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
Forward Voltage/Segment or DP
VF
2.6
OPEAK
635
nm
626
nm
25
V
Peak Wavelength
Dominant Wavelength[3]
Od
Reverse Voltage/Segment or DP[4]
VR
3.0
3.5
V
Temperature Coefficient of
VF /Segment or DP
'VF/°C
-2
mV/°C
Thermal Resistance LED
Junction-to-Pin
RTJ-PIN
375
°C/W/
Seg
IF = 100 mA
IR = 100 PA
Yellow
Device
Series
HDSP420x
Parameter
Symbol
Min.
Typ.
2200
7000
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
Forward Voltage/Segment or DP
VF
2.6
OPEAK
583
Peak Wavelength
Dominant Wavelength[3,6]
Reverse Voltage/Segment or DP [4]
Max.
581.5
586
VR
3.0
Test Conditions
Pcd
IF = 100 mA Peak:
1 of 5 df
IF = 20 mA
Pcd
3400
Od
Units
3.5
V
IF = 100 mA
nm
592.5
nm
25.0
V
Temperature Coefficient of
VF /Segment or DP
'VF/°C
-2
mV/°C
Thermal Resistance LED Junctionto-Pin
RTJ-PIN
375
°C/W/
Seg
IR = 100 PA
Green
Device
Series
HDSP860x
Parameter
Symbol
Min.
Typ.
Units
Test Conditions
680
1500
Pcd
IF = 10 mA
1960
Pcd
IF = 50 mA Peak:
1 of 5 df
Luminous Intensity/Segment[1,2]
(Digit Average)`
IV
Forward Voltage/Segment or DP
VF
2.1
OPEAK
566
Od
571
Peak Wavelength
Dominant Wavelength[3,6]
Reverse Voltage/Segment or DP [4]
VR
3.0
Max.
2.5
V
IF = 10 mA
nm
577
nm
50.0
V
Temperature Coefficient of
VF /Segment or DP
'VF/°C
-2
mV/°C
Thermal Resistance LED Junctionto-Pin
RTJ-PIN
375
°C/W/
Seg
IR = 100 PA
Notes:
1. Case temperature of the device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the
device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs Red HDSP-N100 series displays are recommended. They are tested at 1 mA dc/segment and are pin for
pin compatible with the HDSP-N150 series.
6. The Yellow (HDSP-420x) and Green (HDSP-860x) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
6
!
!
"
!
!
"
!
AlGaAs Red
IDC MAX – MAXIMUM DC CURRENT
PER SEGMENT – mA
50
45
40
35
AlGaAs RED
30
25
20
RθJ-A = 525°C/W
15
10
5
0
10 20
30
40 50
60 70
80 90 100 110
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 1. Maximum allowed peak current vs. pulse duration – AlGaAs Red.
200
180
160
140
AlGaAs RED
120
100
80
60
40
20
0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
TA – AMBIENT TEMPERATURE – °C
VF – FORWARD CURRENT – V
Figure 2. Maximum allowable DC current vs. ambient
temperature.
Figure 3. Forward current vs. forward voltage.
2.50
1.2
μPEAK – RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 20 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
2.25
2.00
1.75
1.50
1.25
AlGaAs RED
1.00
0.75
0.50
0.25
0
0
5
10
15
20
25
30
35
40
45
1.1
1.0
AlGaAs RED
0.9
0.8
0.7
50
0.6
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 5.
Figure 4. Relative luminous intensity vs. DC forward
current.
7
2
3 4 5
10
20 30 40 50
100
200
IPEAK – PEAK FORWARD CURRENT PER SEGMENT
Figure 5. Relative efficiency (luminous intensity per
unit current) vs. peak current.
5$7,22)0$;,08023(5$7,1*3($.
&855(17727(03(5$785('(5$7('
0$;,080'&&855(17
,3($.
,0$;
'&
,0$;
'&
+(5<(//2:
*5((1
5
θ -$ &:
*5((1
Figure 9. Forward current vs. forward voltage.
Ü S
HDN²5(/$7,9(()),&,(1&<
3($.
1250$/,=('72$7P$)25+(5
$1'<(//2:$7P$)25*5((1
5(/$7,9(/80,1286,17(16,7<
1250$/,=('72$7P$)25+(5$1'
<(//2:$7P$)25*5((1
<(//2:
+(5
9²)25:$5'92/7$*(²9
)
Figure 8. Maximum allowable DC current vs. ambient
temperature.
*5((1
+(5$1'
<(//2:
,²)25:$5'&855(173(56(*0(17²P$
)
Figure 10. Relative luminous intensity vs. DC forward
current.
8
7²$0%,(177(03(5$785(²&
$
Figure 7. Maximum allowed peak current vs. pulse duration – Green.
,²)25:$5'&855(173(56(*0(17²P$
)
,0$;²0$;,080'&&855(173(5
'&
6(*0(17²P$
W²38/6('85$7,21²6
3
Figure 6. Maximum allowed peak current vs. pulse duration – HER, Yellow.
23(5$7,21,1
7+,65(*,21
5(48,5(6
7(03(5$785(
'(5$7,1*
2),0$;
'&
'&23(5$7,21
W²38/6('85$7,21²6
3
=
+=
+
'&23(5$7,21
=
N+
23(5$7,21,1
7+,65(*,21
5(48,5(6
7(03(5$785(
'(5$7,1*
2),0$;
'&
=
N+
+=
N
=
+
=
N+
,3($.
+=
N
5$7,22)0$;,08023(5$7,1*3($.
&855(17727(03(5$785('(5$7('
0$;,080'&&855(17
HER, Yellow, Green
*5((1
+(5
<(//2:
,²3($.)25:$5'&855(17
3($.
3(56(*0(17²P$
Figure 11. Relative efficiency (luminous intensity
per unit current) vs. peak current.
Intensity Bin Limits (mcd)
Color Categories
AlGaAs Red
HDSP-N15x
IV Bin Category
Min.
Max.
Color
J
6.14
11.20
Yellow
Bin
Dominant Wavelength (nm)
Min.
Max.
1
581.50
585.00
584.00
587.50
K
9.20
16.90
3
L
13.80
25.30
2
586.50
590.00
4
589.00
592.50
M
20.70
38.00
N
31.10
56.90
O
46.60
Green
85.40
Yellow
HDSP-420x
IV Bin Category
Min.
Max.
C
2.23
4.09
D
3.35
6.14
E
5.02
9.21
F
7.53
13.82
G
11.30
20.72
H
16.95
31.08
I
25.43
46.62
2
573.00
577.00
3
570.00
574.00
4
567.00
571.00
5
564.00
568.00
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your Avago
representatives for further clarification/information.
Contrast Enhancement
Green
HDSP-860x
IV Bin Category
Min.
Max.
D
1.03
1.88
E
1.54
2.82
F
2.31
4.25
G
3.47
6.37
H
5.21
9.55
HDSP-390x
IV Bin Category
Min.
Max.
D
3.35
6.14
HER
E
5.02
9.21
F
7.53
13.82
G
11.30
20.72
H
16.95
31.08
I
25.43
46.62
For product information and a complete list of distributors, please go to our website:
For information on contrast enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloro- ethylene, carbon
tetrachloride, etc.) are not recommended for cleaning
LED parts. All of these various solvents attack or dissolve
the encapsulating epoxies used to form the package of
plastic LED parts.
For information on soldering LEDs, please refer to Application Note 1027.
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. Obsoletes 5988-1737EN
AV02-2551EN - January 27, 2011