Cree® XLamp® XM Family LEDs Binning & Labeling

CLD-AP44 Rev 8E
Binning & Labeling
Cree® XLamp® XM Family LEDs
Table of Contents
Introduction
Introduction.....................................................................................1
This document describes the product nomenclature required
Bin and Order Code Formats..........................................................2
to select and order Cree’s XLamp® XM family of LEDs. XLamp
Performance Groups – Luminous Flux.........................................3
XM family LEDs are tested and sorted into bins which are then
Performance Groups – Chromaticity.............................................4
combined into orderable kits identified by an order code.
Performance groups – Voltage......................................................6
Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE
All XLamp LEDs are tested and sorted by color and brightness
Curve................................................................................................7
into a unique bin. Each bin contains LEDs from only one color
Cree’s Standard Cool White Kits Plotted on ANSI Standard
and brightness group and is uniquely identified by a bin code.
Chromaticity Regions.....................................................................9
White XLamp LEDs are sorted by chromaticity (color) and
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI
luminous flux (brightness). High Voltage White XLamp LEDs
Standard Chromaticity Regions...................................................10
are sorted by chromaticity, luminous flux and voltage. LEDs are
Cree’s Standard Chromaticity Kits...............................................12
shipped on reels containing LEDs from one bin and are always
Standard Order Codes and Bins
labeled with the appropriate bin code.
XM-L ANSI Cool White..........................................................13
XM-L ANSI Neutral White......................................................14
Kits contain LEDs from a number of similar bins and are fully
XM-L ANSI Warm White........................................................15
defined by their order codes. A full explanation of the order
XM-L2 ANSI Cool White........................................................16
codes for XLamp XM family LEDs, as well as a list of standard
XM-L2 ANSI Neutral White....................................................17
order codes, is provided in this document.
XM-L2 ANSI Warm White......................................................18
XM-L High Voltage ANSI Cool White....................................19
XM-L High Voltage ANSI Neutral White...............................20
www.cree.com/Xlamp
XM-L High Voltage ANSI Warm White..................................21
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and
XLamp® are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For
product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected].
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
1
XLamp ® XM Family LED Binning & Labeling
Bin and Order Code Formats
Bin codes and order codes for XM-L and XM-L2 White LEDs are configured in the following manner:
Order Code
Bin Code
Series
XMLA = XM-L
XMLB = XM-L Gen 2
Series
XMLA = XM-L
XMLB = XM-L Gen 2
Internal code
Internal code
Luminous flux group
Luminous flux group
SSSSCC-BD-HHHH-NNNGFFWWW
Color specification
L = White
0 = Cool White
B = 70 CRI minimum
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
Chromaticity group
Color specification
L = White
0 = Cool White
B = 70 CRI minimum
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
SSSSCC-B-WWW-FFF-GG-AAAA
Internal code
Internal code
Chromaticity group
Color
WT = White
Color
WT = White
Bin codes and order codes for XM-L High Voltage White LEDs are configured in the following manner:
Order Code
Bin Code
Series
XML = XM-L
Series
XML = XM-L
Configuration
B = Voltage class
D = Reel size
Configuration
B = Voltage class
Luminous flux group
Color specification
L = White
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
Chromaticity group
SSSCCC-BD-HHHH-NNNNRFFGG
Color specification
L = White
H = 80 CRI minimum
P = 85 CRI minimum
U = 90 CRI minimum
SSSCCC-B-WWW-FFF-VR-AAAA
Luminous flux group
Internal code
Internal code
Voltage performance group
Color
HVW = High Voltage White
Chromaticity group
Color
HVW = High Voltage White
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
2
XLamp ® XM Family LED Binning & Labeling
Performance Groups – Luminous Flux
XLamp XM-L and XM-L2 White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups:
Group Code
Min. Luminous Flux
@ 700 mA (lm)
Max. Luminous Flux
@ 700 mA (lm)
S2
148
156
S3
156
164
S4
164
172
S5
172
182
S6
182
200
T2
200
220
T3
220
240
T4
240
260
T5
260
280
T6
280
300
U2
300
320
U3
320
340
U4
340
360
XLamp XM-L High Voltage White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups:
Group Code
Min. Luminous Flux
@ 44 mA (lm)
Max. Luminous Flux
@ 44 mA (lm)
R5
139
148
S2
148
156
S3
156
164
S4
164
172
S5
172
182
S6
182
200
T2
200
220
T3
220
240
T4
240
260
T5
260
280
T6
280
300
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
3
XLamp ® XM Family LED Binning & Labeling
Performance Groups – Chromaticity
Region
0A
0R
1A
1R
2A
2R
3A
3R
4A
4R
x
y
0.2950
0.2970
0.2920
0.3060
0.2984
0.3133
0.3009
0.2980
0.2950
0.2970
0.3009
0.3042
0.3037
0.2937
0.3048
0.3130
0.3144
0.3186
0.3068
0.3068
0.3144
0.3186
0.3161
0.3059
0.3093
Region
x
y
0.2920
0.3060
x
y
0.2984
0.3133
0.2895
0.3135
0.2962
0.3220
0.2962
0.3220
0.3028
0.3304
0.3042
0.2984
0.2880
0.2895
0.3133
0.3048
0.3135
0.2962
0.2870
0.3210
0.2937
0.3312
0.2937
0.3312
0.2962
0.3220
0.3005
0.3415
0.3028
0.3304
0.3207
0.3028
0.3290
0.3115
0.3304
0.3115
0.3391
0.3205
0.3130
0.3290
0.3213
0.3373
0.3113
0.3048
0.3113
0.3005
0.3207
0.3130
0.3415
0.3099
0.3099
0.3509
0.3115
0.3391
0.3196
0.3602
0.3205
0.3481
0.2993
0.3028
0.3304
0.3115
0.3215
0.3350
0.3290
0.3417
0.3207
0.3462
0.3290
0.3538
0.3290
0.3300
0.3222
0.3243
0.3290
0.3417
0.3215
0.3350
0.3222
0.3243
0.3196
0.3602
0.3290
0.3300
0.3290
0.3180
0.3290
0.3690
0.3290
0.3538
0.3231
0.3371
0.3120
0.3207
0.3490
0.3376
0.3451
0.3554
0.3463
0.3687
0.3440
0.3427
0.3366
0.3369
0.3451
0.3554
0.3371
0.3490
0.3366
0.3440
0.3369
0.3381
0.3428
0.3480
0.3429
0.3307
0.3361
0.3245
0.3463
0.3687
0.3376
0.3616
0.3530
0.3597
0.3548
0.3736
0.3615
0.3659
0.3590
0.3521
0.3641
0.3804
0.3615
0.3659
0.3512
0.3512
0.3465
0.3530
0.3465
0.3571
0.3590
0.3521
0.3668
0.3957
0.3567
0.3389
0.3495
0.3339
0.3641
0.3804
0.3548
0.3736
0B
0S
1B
1S
2B
2S
3B
3S
4B
4S
Region
x
y
0.2984
0.3133
0.3048
0.3207
0.3068
0.3113
0.3207
0.3009
0.3042
0.3220
0.3037
0.2937
0.3009
0.3042
0.3068
0.3113
0.3093
0.2993
0.3391
0.3130
0.3290
0.3481
0.3213
0.3373
0.3221
0.3261
0.3290
0.3144
0.3186
0.3509
0.3144
0.3186
0.3221
0.3261
0.3231
0.3120
0.3391
0.3161
0.3059
0.3290
0.3538
0.3290
0.3417
0.3376
0.3616
0.3371
0.3490
0.3371
0.3490
0.3366
0.3369
0.3290
0.3417
0.3290
0.3300
0.3290
0.3690
0.3290
0.3300
0.3381
0.3762
0.3366
0.3369
0.3376
0.3616
0.3361
0.3245
0.3462
0.3290
0.3538
0.3290
0.3180
0.3616
0.3463
0.3687
0.3451
0.3554
0.3551
0.3760
0.3533
0.3620
0.3533
0.3620
0.3515
0.3487
0.3451
0.3554
0.3440
0.3427
0.3762
0.3480
0.3840
0.3440
0.3428
0.3840
0.3571
0.3907
0.3515
0.3487
0.3551
0.3760
0.3495
0.3339
0.3463
0.3687
0.3429
0.3307
0.3641
0.3804
0.3615
0.3659
0.3736
0.3874
0.3702
0.3722
0.3702
0.3722
0.3670
0.3578
0.3597
0.3615
0.3659
0.3590
0.3521
0.3907
0.3668
0.3957
0.3590
0.3521
0.3771
0.4034
0.3670
0.3578
0.3736
0.3874
0.3640
0.3440
0.3641
0.3804
0.3567
0.3389
0C
0T
1C
1T
2C
2T
3C
3T
4C
4T
Region
0D
0U
1D
1U
2D
2U
3D
3U
4D
4U
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
4
XLamp ® XM Family LED Binning & Labeling
Performance Groups – Chromaticity (Continued)
Region
5A1
5B1
5C1
5D1
6A1
6B1
6C1
6D1
7A1
7B1
x
y
0.3670
0.3578
0.3686
0.3649
0.3744
0.3685
0.3726
0.3702
0.3719
0.3797
0.3782
0.3837
0.3763
0.3760
Region
x
y
0.3686
0.3649
0.3702
0.3722
0.3763
0.3760
0.3612
0.3744
0.3722
0.3719
0.3736
0.3874
0.3802
0.3916
0.3782
0.3837
5A2
5B2
Region
x
y
0.3744
0.3685
0.3763
0.3760
0.3825
0.3798
0.3685
0.3804
0.3797
0.3782
0.3802
0.3916
0.3869
0.3958
0.3847
0.3877
5A3
5B3
Region
x
y
0.3726
0.3612
0.3744
0.3685
0.3804
0.3721
0.3721
0.3783
0.3646
0.3837
0.3763
0.3760
0.3782
0.3837
0.3847
0.3877
0.3825
0.3798
5A4
5B4
0.3825
0.3798
0.3847
0.3877
0.3912
0.3917
0.3887
0.3836
0.3847
0.3877
0.3869
0.3958
0.3937
0.4001
0.3912
0.3917
0.3912
0.3917
0.3937
0.4001
0.4006
0.4044
0.3978
0.3958
0.3887
0.3836
0.3912
0.3917
0.3978
0.3958
0.3950
0.3875
0.3783
0.3646
0.3804
0.3721
0.3863
0.3758
0.3840
0.3681
0.3804
0.3721
0.3825
0.3798
0.3887
0.3836
0.3863
0.3758
0.3863
0.3758
0.3887
0.3836
0.3950
0.3875
0.3924
0.3794
0.3840
0.3681
0.3863
0.3758
0.3924
0.3794
0.3898
0.3716
0.3889
0.3690
0.3915
0.3768
0.3981
0.3800
0.3953
0.3720
0.3915
0.3768
0.3941
0.3848
0.4010
0.3882
0.3981
0.3800
0.3981
0.3800
0.4010
0.3882
0.4080
0.3916
0.4048
0.3832
0.3953
0.3720
0.3981
0.3800
0.4048
0.3832
0.4017
0.3751
0.3941
0.3848
0.3968
0.3930
0.4040
0.3966
0.4010
0.3882
0.3968
0.3930
0.3996
0.4015
0.4071
0.4052
0.4040
0.3966
0.4040
0.3966
0.4071
0.4052
0.4146
0.4089
0.4113
0.4001
0.4010
0.3882
0.4040
0.3966
0.4113
0.4001
0.4080
0.3916
0.4080
0.3916
0.4113
0.4001
0.4186
0.4037
0.4150
0.3950
0.4113
0.4001
0.4146
0.4089
0.4222
0.4127
0.4186
0.4037
0.4186
0.4037
0.4222
0.4127
0.4299
0.4165
0.4259
0.4073
0.4150
0.3950
0.4186
0.4037
0.4259
0.4073
0.4221
0.3984
0.4017
0.3751
0.4048
0.3832
0.4116
0.3865
0.4082
0.3782
0.4048
0.3832
0.4080
0.3916
0.4150
0.3950
0.4116
0.3865
0.4116
0.3865
0.4150
0.3950
0.4221
0.3984
0.4183
0.3898
0.4082
0.3782
0.4116
0.3865
0.4183
0.3898
0.4147
0.3814
0.4147
0.3814
0.4183
0.3898
0.4242
0.3919
0.4203
0.3833
0.4183
0.3898
0.4221
0.3984
0.4281
0.4006
0.4242
0.3919
0.4242
0.3919
0.4281
0.4006
0.4342
0.4028
0.4300
0.3939
0.4203
0.3833
0.4242
0.3919
0.4300
0.3939
0.4259
0.353
0.4221
0.3984
0.4259
0.4073
0.4322
0.4096
0.4281
0.4006
0.4259
0.4073
0.4299
0.4165
0.4364
0.4188
0.4322
0.4096
0.4322
0.4096
0.4364
0.4188
0.4430
0.4212
0.4385
0.4119
0.4281
0.4006
0.4322
0.4096
0.4385
0.4119
0.4342
0.4028
5C2
5D2
6A2
6B2
6C2
6D2
7A2
7B2
5C3
5D3
6A3
6B3
6C3
6D3
7A3
7B3
5C4
5D4
6A4
6B4
6C4
6D4
7A4
7B4
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
5
XLamp ® XM Family LED Binning & Labeling
Performance Groups – Chromaticity (Continued)
Region
7C1
7D1
8A1
8B1
8C1
8D1
x
y
Region
x
y
0.4385
0.4119
0.4342
0.4028
0.4385
0.4119
0.4449
0.4141
0.4430
0.4212
0.4496
0.4236
0.4403
0.4259
0.4049
0.4449
0.3853
0.4300
0.4300
0.3939
0.4342
0.4028
0.4359
0.3960
0.4316
0.3873
0.4403
0.4049
0.4359
0.3960
0.4373
0.4418
0.3893
0.4418
0.3981
0.4465
0.4475
0.3994
0.4428
0.3906
0.4523
0.4085
0.4475
0.3994
0.4465
0.4071
0.4513
0.4164
0.4513
0.4164
0.4573
0.4178
0.4562
0.4260
0.4624
0.4274
0.4523
0.4085
0.4573
0.4178
0.4634
0.4193
0.4582
0.4099
0.4582
0.4099
0.4634
0.4193
0.4695
0.4207
0.4641
0.4112
0.4634
0.4193
0.4687
0.4289
0.4750
0.4304
0.4695
0.4207
0.4695
0.4207
0.4750
0.4304
0.4813
0.4319
0.4756
0.4221
0.4641
0.4112
0.4695
0.4207
0.4756
0.4221
0.4700
0.4126
0.4483
0.3919
0.4532
0.4008
0.4589
0.4021
0.4538
0.3931
0.4532
0.4008
0.4582
0.4099
0.4641
0.4112
0.4589
0.4021
0.4589
0.4021
0.4641
0.4112
0.4700
0.4126
0.4646
0.4034
0.4538
0.3931
0.4589
0.4021
0.4646
0.4034
0.4593
0.3944
7C2
7D2
8A2
8B2
8C2
8D2
Region
x
y
0.4449
0.4141
0.4496
0.4236
0.4562
0.4260
0.4141
0.4513
0.3939
0.4359
0.4403
0.4049
0.4465
0.4071
0.4418
0.3981
0.3981
0.4475
0.4071
0.4523
0.4582
0.4099
0.4532
0.4008
0.4573
0.4178
0.4624
0.4274
0.4687
0.4289
7C3
7D3
8A3
8B3
8C3
8D3
Region
x
y
0.4403
0.4049
0.4449
0.4141
0.4513
0.4164
0.4164
0.4465
0.4071
0.3960
0.4316
0.3873
0.4359
0.3960
0.4418
0.3981
0.4373
0.3893
0.3994
0.4428
0.3906
0.4085
0.4475
0.3994
0.4532
0.4008
0.4483
0.3919
0.4523
0.4085
0.4573
0.4178
0.4634
0.4193
7C4
7D4
8A4
8B4
8C4
8D4
Performance groups – Voltage
XLamp XM-L High Voltage White LEDs are classified into one of the following voltage classes:
Forward Voltage Class
Min. Forward Voltage
@ 44 mA (V)
Tj = 85 °C
0
Max. Forward Voltage
@ 44 mA (V)
Tj= 85 °C
No voltage bin
1
40.0
42.5
2
42.5
45.0
3
45.0
47.5
4
47.5
50.0
5
50.0
52.5
6
52.5
55.0
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
6
XLamp ® XM Family LED Binning & Labeling
Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve
ANSI Cool White
0.40
5000 K
0.39
5700 K
0.38
3S
0.37
6500 K
2T
0.36
0.35
CCy
3B
2S
2C
1T
8000 K
0T
0.33
0C
0B
0.31
3R
2A
1D
2U
ANSI
C78.377A
2R
1A
1U
0D
0A
0.30
2D
1C
1B
0S
0.32
3A
2B
1S
0.34
1R
0U
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Neutral White
0.44
0.43
3500 K
6T
0.42
4000 K
0.41
5T
0.40
5S
5000 K
0.39
CCy
6S
4500 K
5C2
4T
5B3
5B2
4S
0.38
3T
4C
3S
0.37
5A2
4B
3C
0.36
3B
3D
0.35
4D
4A
5A1
5C1
5B4
5D2
5A3
5A4
5D1
5D3
5D4
6A4
6D3
6D2
6A3
6A2
6A1
6B4
6B1
6C4
6C1
6D4
6D1
6U
6R
5U
5R
4U
3A
0.34
5B1
5C4
6B3
6B2
5C3
6C3
6C2
ANSI
C78.377A
4R
3U
3R
0.33
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
CCx
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
7
XLamp ® XM Family LED Binning & Labeling
Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve - continued
ANSI Neutral White and ANSI warm white
0.46
0.45
2700 K
3000 K
0.44
0.43
3500 K
0.42
4000 K
CCy
0.41
6C3
4500 K
6C2
6B3
0.40
6B2
5C3
5000 K
0.39
5B3
5B1
4C
0.37
7A1
7A4
7A3
7D1
7D2
7D4
7D3
8A1
8A3
8A2
8A4
4D
8D1
8B4
8D2
8C2
8C1
8C3
8C4
8D3
8D4
6D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
3C
0.36
6A2
5D3
5A3
5A2
4B
6D2
6A3
5D2
7A2
6D3
6B1
5C4
5C1
5B4
0.38
6C1
6B4
5C2
5B2
6C4
8B1
7C4
7C1
7B4
7B1
7C2
7B3
7B2
8B3
8B2
7C3
5A1
3B
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
8
XLamp ® XM Family LED Binning & Labeling
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions
0.40
0.40
5000 K
0.39
0.38
3S
51
6500 K
0.36
8000 K
6500 K
0T
0C
0B
0A
1U
1R
0U
CCy
0.36
0.34
0.28
0.35
0.34
0.33
0.32
0.31
0.30
0.33
0.28
0.36
0.28
0.35
0R
0.29
CCx
CCx
0.40
0.40
5000 K
0.39
0.38
0.38
0.36
0.36
2C
1S
0T
0.33
0S
0.32
0B
0.31
1C
0A
1D
2U
0S
0C
3R
2A
1D
2U
ANSI
C78.377A
2R
1A
1U
0D
0A
1R
3A
2D
1C
1B
0B
0.31
1R
0U
0.30
0R
0U
0.30
0T
0.32
ANSI
C78.377A
1U
2C
2B
1S
0.33
2R
1A
0D
0.34
3R
2A
1B
0C
3A
2D
3B
2S
1T
8000 K
CCy
0.34
0.35
2B
2T
E1
3B
1T
8000 K
3S
6500 K
2T
2S
0.35
5700 K
0.37
3S
50
6500 K
5000 K
0.39
5700 K
0.37
0.29
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.28
CCx
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
0.30
0.28
0.29
CCy
ANSI
C78.377A
2R
1A
0A
2U
1D
0D
0.30
0R
0.29
0C
0B
0.31
1R
0U
0.29
0.28
0S
0.32
3R
2A
1B
0.32
0.30
1U
2D
1C
0.31
0.31
ANSI
C78.377A
2R
1A
0D
0T
0.33
2U
1D
3A
2B
1S
0.30
0S
0.32
8000 K
0.34
3R
2A
1B
3B
2C
1T
3A
2D
1C
3S
2T
2S
0.35
0.29
0.33
0.36
3B
2B
1S
53
0.37
2C
1T
0.34
5700 K
2T
2S
0.35
CCy
0.38
5700 K
0.37
5000 K
0.39
CCx
0.40
5000 K
0.39
0.38
5700 K
E2
0.37
6500 K
0.36
3B
2S
0.35
CCy
3S
2T
2C
1T
8000 K
0.34
0T
0.33
0S
0.32
0C
0.31
3R
2A
2U
1D
ANSI
C78.377A
2R
1A
0D
0A
2D
1C
1B
0B
3A
2B
1S
1U
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
9
XLamp ® XM Family LED Binning & Labeling
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions
0.46
0.45
2700 K
3000 K
0.44
0.43
0.42
4000 K
0.41
E6
4500 K
E5
0.40
CCy
E7
3500 K
5000 K
0.39
0.38
E3
0.37
E4
5B1
5D3
6D4
7A4
7A1
8B3
8C1
8B4
8C2
8C3
8C4
8D3
8D2
8D4
6A4
6A1
5D4
5D1
ANSI
C78.377A
5A4
3B
8B2
6D1
5D2
5A2
3C
5A1
4D
0.36
6D2
6A3
6A2
8D1
8A4
8A1
7D4
7D1
8A3
8A2
7D3
7D2
7A3
7A2
6D3
8B1
7C4
7C1
7B4
7B1
6C1
6B1
5C4
5A3
4B
6C2
6C4
6B4
5C1
5B4
4C
6B2
5C3
5C2
5B3
5B2
6C3
6B3
7C2
7B3
7B2
7C3
E8
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43
3500 K
0.42
4000 K
0.41
4500 K
CCy
0.40
0.39
F4
0.38
0.37
5C4
5D2
7A2
6D3
6D2
6A3
6A2
5D3
5A3
6C1
6D4
7A1
7A4
7C1
7B4
7B1
6C4
6B4
6B1
5C1
5B1
5A2
4B
7A3
7D1
7D2
7D4
7D3
8A1
8A2
8A4
8A3
8D1
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
4D
3B
5B3
5B4
3C
0.36
5C3
5B2
4C
6C2
8B1
7C4
8B3
8B2
7C3
7C2
7B3
7B2
6B2
5C2
F7
6C3
6B3
F5
5000 K
F6
F8
5A1
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
10
XLamp ® XM Family LED Binning & Labeling
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Continued
0.46
0.45
2700 K
3000 K
0.44
0.43
0.42
Z6
4000 K
0.41
Z5
4500 K
0.40
CCy
Z7
3500 K
0.39
5B3
5B1
4C
0.37
6D4
7A1
7A4
7A3
7D1
7D2
7D4
7D3
8A1
8B1
7C4
8A2
8A4
8A3
8D1
4D
8B2
8B3
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
3C
3B
5D3
7A2
6D3
6D2
6A3
6A2
5D2
5A3
5A2
4B
6B1
5C4
5C1
5B4
0.38
6C1
7C1
7B4
7B1
6C4
6B4
5C2
5B2
0.36
6C2
6B2
5C3
5000 K
6C3
6B3
7C2
7B3
7B2
7C3
Z8
5A1
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
11
XLamp ® XM Family LED Binning & Labeling
Cree’s Standard Chromaticity Kits
The following table provides the chromaticity bins associated with chromaticity kits.
Color
Cool
White
Neutral
White
Warm
White
*
CCT
Kit
Chromaticity Bins
6200 K
51
0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K
53
1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K
50
1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K
E1
1A, 1B, 1C, 1D
5700 K
E2
2A, 2B, 2C, 2D
5000 K
E3
3A, 3B, 3C, 3D
4750 K
F4
3C, 3D, 4A, 4B
4500 K
E4
4A, 4B, 4C, 4D
4250 K
F5
4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K
E5
5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
4000 K
Z5
5A3, 5B4, 5C1, 5D2
3750 K
F6
5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K
E6
6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3500 K
Z6
6A3, 6B4, 6C1, 6D2
3250 K
F7
6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K
E7
7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
3000 K
Z7
7A3, 7B4, 7C1, 7D2
2850 K
F8
7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K
E8
8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2700 K
Z8
8A3, 8B4, 8C1, 8D2
Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
12
XLamp ® XM Family LED Binning & Labeling
The following tables of order codes list flux minimums and chromaticity regions for XLamp XM family LEDs. For other flux and chromaticity
combinations, contact Cree or an authorized distributor.
Standard Order Codes and Bins (XM-L ANSI Cool White, TJ = 25 °C)
XLamp XM-L LED Standard Order Codes - White
Chromaticity
Minimum Luminous
Flux (lm) @ 700 mA*
Kit
Code
CCT
Flux (lm)
Order Codes
65 CRI Typical
ANSI Cool White (5000 K – 8300 K)
51
53
50
E1
E2
*
6200 K
6000 K
6200 K
6500 K
5700 K
U2
300
XMLAWT-00-0000-0000U2051
T6
280
XMLAWT-00-0000-0000T6051
T5
260
XMLAWT-00-0000-0000T5051
U2
300
XMLAWT-00-0000-0000U2053
T6
280
XMLAWT-00-0000-0000T6053
T5
260
XMLAWT-00-0000-0000T5053
U2
300
XMLAWT-00-0000-0000U2050
T6
280
XMLAWT-00-0000-0000T6050
T5
260
XMLAWT-00-0000-0000T5050
U2
300
XMLAWT-00-0000-0000U20E1
T6
280
XMLAWT-00-0000-0000T60E1
T5
260
XMLAWT-00-0000-0000T50E1
U2
300
XMLAWT-00-0000-0000U20E2
T6
280
XMLAWT-00-0000-0000T60E2
T5
260
XMLAWT-00-0000-0000T50E2
Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
13
XLamp ® XM Family LED Binning & Labeling
Standard Order Codes and Bins (XM-L ANSI Neutral White, TJ = 25 °C)
XLamp XM-L LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum Luminous
Flux (lm) @ 700 mA*
Code
Flux (lm)
Order Codes
75 CRI Typical
80 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
E3
F4
4750 K
E4
4500 K
F5
E5
Z5
*
5000 K
4250 K
4000 K
4000 K
T6
280
XMLAWT-00-0000-000LT60E3
T5
260
XMLAWT-00-0000-000LT50E3
T4
240
XMLAWT-00-0000-000LT40E3
T5
260
XMLAWT-00-0000-000LT50F4
T4
240
XMLAWT-00-0000-000LT40F4
T5
260
XMLAWT-00-0000-000LT50E4
T4
240
XMLAWT-00-0000-000LT40E4
T5
260
XMLAWT-00-0000-000LT50F5
T4
240
XMLAWT-00-0000-000LT40F5
T5
260
XMLAWT-00-0000-000LT50E5
T4
240
XMLAWT-00-0000-000LT40E5
XMLAWT-00-0000-000HT40E5
T3
220
XMLAWT-00-0000-000LT30E5
XMLAWT-00-0000-000HT30E5
T4
240
XMLAWT-00-0000-000LT40Z5
T3
220
XMLAWT-00-0000-000LT30Z5
XMLAWT-00-0000-000HT30Z5
Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
14
XLamp ® XM Family LED Binning & Labeling
Standard Order Codes and Bins (XM-L ANSI Warm White, TJ = 25 °C)
XLamp XM-L LED Standard Kit Codes - White
Chromaticity
Minimum
Luminous Flux
(lm) @ 700 mA*
Kit
Code
Flux (lm)
80 CRI Typical
T4
240
XMLAWT-00-0000-000LT40F6
XMLAWT-00-0000-000HT40F6
T3
220
XMLAWT-00-0000-000LT30F6
XMLAWT-00-0000-000HT30F6
T2
200
XMLAWT-00-0000-000LT20F6
XMLAWT-00-0000-000HT20F6
T4
240
XMLAWT-00-0000-000LT40E6
XMLAWT-00-0000-000HT40E6
T3
220
XMLAWT-00-0000-000LT30E6
XMLAWT-00-0000-000HT30E6
T2
200
XMLAWT-00-0000-000LT20E6
XMLAWT-00-0000-000HT20E6
T3
220
XMLAWT-00-0000-000LT30Z6
XMLAWT-00-0000-000HT30Z6
T2
200
XMLAWT-00-0000-000LT20Z6
XMLAWT-00-0000-000HT20Z6
T3
220
XMLAWT-00-0000-000LT30F7
XMLAWT-00-0000-000HT30F7
T2
200
XMLAWT-00-0000-000LT20F7
XMLAWT-00-0000-000HT20F7
T3
220
XMLAWT-00-0000-000LT30E7
XMLAWT-00-0000-000HT30E7
T2
200
XMLAWT-00-0000-000LT20E7
XMLAWT-00-0000-000HT20E7
CCT
Order Codes
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
F6
E6
Z6
F7
E7
Z7
F8
E8
Z8
*
3750 K
3500 K
3500 K
3250 K
3000 K
3000 K
2850 K
2700 K
2700 K
S6
182
XMLAWT-00-0000-000PS60E7
XMLAWT-00-0000-000US60E7
S5
172
XMLAWT-00-0000-000PS50E7
XMLAWT-00-0000-000US50E7
S4
164
XMLAWT-00-0000-000PS40E7
XMLAWT-00-0000-000US40E7
T3
220
XMLAWT-00-0000-000LT30Z7
XMLAWT-00-0000-000HT30Z7
T2
200
XMLAWT-00-0000-000LT20Z7
XMLAWT-00-0000-000HT20Z7
S6
182
S5
172
XMLAWT-00-0000-000PS50Z7
XMLAWT-00-0000-000US50Z7
XMLAWT-00-0000-000PS40Z7
XMLAWT-00-0000-000US40Z7
S4
164
T2
200
XMLAWT-00-0000-000LT20F8
XMLAWT-00-0000-000HT20F8
S6
182
XMLAWT-00-0000-000LS60F8
XMLAWT-00-0000-000HS60F8
S5
172
XMLAWT-00-0000-000PS50F8
XMLAWT-00-0000-000US50F8
S4
164
XMLAWT-00-0000-000PS40F8
XMLAWT-00-0000-000US40F8
S3
156
XMLAWT-00-0000-000PS30F8
XMLAWT-00-0000-000US30F8
T2
200
XMLAWT-00-0000-000LT20E8
XMLAWT-00-0000-000HT20E8
S6
182
XMLAWT-00-0000-000LS60E8
XMLAWT-00-0000-000HS60E8
S5
172
XMLAWT-00-0000-000PS50E8
XMLAWT-00-0000-000US50E8
S4
164
XMLAWT-00-0000-000PS40E8
XMLAWT-00-0000-000US40E8
S3
156
XMLAWT-00-0000-000PS30E8
XMLAWT-00-0000-000US30E8
T2
200
XMLAWT-00-0000-000LT20Z8
XMLAWT-00-0000-000HT20Z8
S6
182
XMLAWT-00-0000-000LS60Z8
XMLAWT-00-0000-000HS60Z8
S5
172
S4
164
XMLAWT-00-0000-000PS40Z8
XMLAWT-00-0000-000US40Z8
S3
156
XMLAWT-00-0000-000PS30Z8
XMLAWT-00-0000-000US30Z8
Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
15
XLamp ® XM Family LED Binning & Labeling
Standard Order Codes and Bins (XM-L2 ANSI Cool White, TJ = 85 °C)
XLamp XM-L2 LED Standard Order Codes - White
Chromaticity
Minimum Luminous
Flux (lm) @ 700 mA*
Kit
Code
CCT
Flux (lm)
Order Codes
65 CRI Typical
85 CRI Minimum
ANSI Cool White (5000 K – 8300 K)
51
53
50
E1
E2
*
6200 K
6000 K
6200 K
6500 K
5700 K
U3
320
XMLBWT-00-0000-0000U3051
U2
300
XMLBWT-00-0000-0000U2051
T6
280
XMLBWT-00-0000-0000T6051
T5
260
XMLBWT-00-0000-0000T5051
T4
240
XMLBWT-00-0000-000PT4051
T3
220
XMLBWT-00-0000-000PT3051
T2
200
U3
320
XMLBWT-00-0000-0000U3053
U2
300
XMLBWT-00-0000-0000U2053
T6
280
XMLBWT-00-0000-0000T6053
T5
260
XMLBWT-00-0000-0000T5053
T4
240
XMLBWT-00-0000-000PT4053
T3
220
XMLBWT-00-0000-000PT3053
T2
200
XMLBWT-00-0000-000PT2053
U3
320
XMLBWT-00-0000-0000U3050
U2
300
XMLBWT-00-0000-0000U2050
T6
280
XMLBWT-00-0000-0000T6050
T5
260
XMLBWT-00-0000-0000T5050
T4
240
XMLBWT-00-0000-000PT4050
T3
220
XMLBWT-00-0000-000PT3050
T2
200
XMLBWT-00-0000-000PT2050
XMLBWT-00-0000-000PT2051
U3
320
XMLBWT-00-0000-0000U30E1
U2
300
XMLBWT-00-0000-0000U20E1
T6
280
XMLBWT-00-0000-0000T60E1
XMLBWT-00-0000-0000T50E1
T5
260
T4
240
XMLBWT-00-0000-000PT40E1
T3
220
XMLBWT-00-0000-000PT30E1
T2
200
U3
320
XMLBWT-00-0000-0000U30E2
XMLBWT-00-0000-000PT20E1
U2
300
XMLBWT-00-0000-0000U20E2
T6
280
XMLBWT-00-0000-0000T60E2
T5
260
XMLBWT-00-0000-0000T50E2
T4
240
XMLBWT-00-0000-000PT40E2
T3
220
XMLBWT-00-0000-000PT30E2
T2
200
XMLBWT-00-0000-000PT20E2
Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
16
XLamp ® XM Family LED Binning & Labeling
Standard Order Codes and Bins (XM-L2 ANSI Neutral White, TJ = 85 °C)
XLamp XM-L2 LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum Luminous
Flux (lm) @ 700 mA*
Code
Flux (lm)
Order Codes
70 CRI Minimum
75 CRI Typical
80 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
E3
F4
E4
F5
E5
Z5
*
5000 K
4750 K
4500 K
4250 K
4000 K
4000 K
U2
300
XMLBWT-00-0000-000BU20E3
T6
280
XMLBWT-00-0000-000BT60E3
XMLBWT-00-0000-000LT60E3
T5
260
XMLBWT-00-0000-000BT50E3
XMLBWT-00-0000-000LT50E3
T4
240
U2
300
XMLBWT-00-0000-000BU20F4
T6
280
XMLBWT-00-0000-000BT60F4
XMLBWT-00-0000-000LT60F4
T5
260
XMLBWT-00-0000-000BT50F4
XMLBWT-00-0000-000LT50F4
T4
240
U2
300
XMLBWT-00-0000-000BU20E4
T6
280
XMLBWT-00-0000-000BT60E4
XMLBWT-00-0000-000LT60E4
T5
260
XMLBWT-00-0000-000BT50E4
XMLBWT-00-0000-000LT50E4
XMLBWT-00-0000-000LT40E3
XMLBWT-00-0000-000LT40F4
T4
240
T6
280
XMLBWT-00-0000-000BT60F5
XMLBWT-00-0000-000LT40E4
T5
260
XMLBWT-00-0000-000BT50F5
XMLBWT-00-0000-000LT50F5
T4
240
XMLBWT-00-0000-000BT40F5
XMLBWT-00-0000-000LT40F5
T6
280
XMLBWT-00-0000-000BT60E5
T5
260
XMLBWT-00-0000-000BT50E5
XMLBWT-00-0000-000LT50E5
XMLBWT-00-0000-000HT50E5
T4
240
XMLBWT-00-0000-000BT40E5
XMLBWT-00-0000-000LT40E5
XMLBWT-00-0000-000HT40E5
XMLBWT-00-0000-000HT30E5
T3
220
XMLBWT-00-0000-000LT30E5
T5
260
XMLBWT-00-0000-000LT50Z5
T4
240
XMLBWT-00-0000-000LT40Z5
XMLBWT-00-0000-000HT40Z5
T3
220
XMLBWT-00-0000-000LT30Z5
XMLBWT-00-0000-000HT30Z5
Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
17
XLamp ® XM Family LED Binning & Labeling
Standard Order Codes and Bins (XM-L2 ANSI Warm White, TJ = 85 °C)
XLamp XM-L2 LED Standard Kit Codes - White
Chromaticity
Minimum Luminous
Flux (lm) @ 700 mA*
Kit
Code
CCT
Flux (lm)
Order Codes
80 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
XMLBWT-00-0000-000PT20E7
XMLBWT-00-0000-000UT20E7
XMLBWT-00-0000-000PS60E7
XMLBWT-00-0000-000US60E7
ANSI Warm White (2700 K - 3750 K)
F6
E6
Z6
F7
E7
Z7
F8
*
3750 K
3500 K
3500 K
3250 K
3000 K
3000 K
2850 K
T5
260
XMLBWT-00-0000-000LT50F6
XMLBWT-00-0000-000HT50F6
T4
240
XMLBWT-00-0000-000LT40F6
XMLBWT-00-0000-000HT40F6
T3
220
XMLBWT-00-0000-000LT30F6
XMLBWT-00-0000-000HT30F6
T2
200
XMLBWT-00-0000-000LT20F6
XMLBWT-00-0000-000HT20F6
T5
260
XMLBWT-00-0000-000LT50E6
XMLBWT-00-0000-000HT50E6
T4
240
XMLBWT-00-0000-000LT40E6
XMLBWT-00-0000-000HT40E6
T3
220
XMLBWT-00-0000-000LT30E6
XMLBWT-00-0000-000HT30E6
T2
200
XMLBWT-00-0000-000LT20E6
XMLBWT-00-0000-000HT20E6
T5
260
XMLBWT-00-0000-000LT50Z6
T4
240
XMLBWT-00-0000-000LT40Z6
XMLBWT-00-0000-000HT40Z6
T3
220
XMLBWT-00-0000-000LT30Z6
XMLBWT-00-0000-000HT30Z6
T2
200
XMLBWT-00-0000-000LT20Z6
XMLBWT-00-0000-000HT20Z6
T5
260
XMLBWT-00-0000-000LT50F7
XMLBWT-00-0000-000HT50F7
T4
240
XMLBWT-00-0000-000LT40F7
XMLBWT-00-0000-000HT40F7
T3
220
XMLBWT-00-0000-000LT30F7
XMLBWT-00-0000-000HT30F7
T2
200
XMLBWT-00-0000-000LT20F7
XMLBWT-00-0000-000HT20F7
T5
260
XMLBWT-00-0000-000LT50E7
XMLBWT-00-0000-000HT50E7
T4
240
XMLBWT-00-0000-000LT40E7
XMLBWT-00-0000-000HT40E7
T3
220
XMLBWT-00-0000-000LT30E7
XMLBWT-00-0000-000HT30E7
T2
200
XMLBWT-00-0000-000LT20E7
XMLBWT-00-0000-000HT20E7
S6
182
S5
172
XMLBWT-00-0000-000PS50E7
XMLBWT-00-0000-000US50E7
S4
164
XMLBWT-00-0000-000PS40E7
XMLBWT-00-0000-000US40E7
T4
240
XMLBWT-00-0000-000LT40Z7
XMLBWT-00-0000-000HT40Z7
T3
220
XMLBWT-00-0000-000LT30Z7
XMLBWT-00-0000-000HT30Z7
T2
200
XMLBWT-00-0000-000LT20Z7
XMLBWT-00-0000-000HT20Z7
S6
182
XMLBWT-00-0000-000PS60Z7
XMLBWT-00-0000-000US60Z7
S5
172
XMLBWT-00-0000-000PS50Z7
XMLBWT-00-0000-000US50Z7
S4
164
XMLBWT-00-0000-000PS40Z7
XMLBWT-00-0000-000US40Z7
T4
240
XMLBWT-00-0000-000LT40F8
XMLBWT-00-0000-000HT40F8
T3
220
XMLBWT-00-0000-000LT30F8
XMLBWT-00-0000-000LT30F8
T2
200
XMLBWT-00-0000-000LT20F8
XMLBWT-00-0000-000HT20F8
S6
182
XMLBWT-00-0000-000LS60F8
XMLBWT-00-0000-000HS60F8
S5
172
XMLBWT-00-0000-000PS60F8
XMLBWT-00-0000-000US60F8
XMLBWT-00-0000-000PS50F8
XMLBWT-00-0000-000US50F8
S4
164
XMLBWT-00-0000-000PS40F8
XMLBWT-00-0000-000US40F8
S3
156
XMLBWT-00-0000-000PS30F8
XMLBWT-00-0000-000US30F8
Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
18
XLamp ® XM Family LED Binning & Labeling
Standard Order Codes and Bins (XM-L2 ANSI Warm White, TJ = 85 °C) - Continued
XLamp XM-L2 LED Standard Kit Codes - White
Chromaticity
Minimum Luminous
Flux (lm) @ 700 mA*
Kit
Code
Flux (lm)
80 CRI Typical
T4
240
XMLBWT-00-0000-000LT40E8
XMLBWT-00-0000-000HT40E8
T3
220
XMLBWT-00-0000-000LT30E8
XMLBWT-00-0000-000HT30E8
T2
200
XMLBWT-00-0000-000LT20E8
XMLBWT-00-0000-000HT20E8
S6
182
XMLBWT-00-0000-000LS60E8
XMLBWT-00-0000-000HS60E8
S5
172
CCT
Order Codes
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
E8
Z8
2700 K
2700 K
XMLBWT-00-0000-000PS60E8
XMLBWT-00-0000-000US60E8
XMLBWT-00-0000-000PS50E8
XMLBWT-00-0000-000US50E8
S4
164
XMLBWT-00-0000-000PS40E8
XMLBWT-00-0000-000US40E8
S3
156
XMLBWT-00-0000-000PS30E8
XMLBWT-00-0000-000US30E8
T3
220
XMLBWT-00-0000-000LT30Z8
XMLBWT-00-0000-000HT30Z8
T2
200
XMLBWT-00-0000-000LT20Z8
XMLBWT-00-0000-000HT20Z8
S6
182
XMLBWT-00-0000-000LS60Z8
XMLBWT-00-0000-000HS60Z8
S5
172
XMLBWT-00-0000-000PS50Z8
XMLBWT-00-0000-000US50Z8
S4
164
XMLBWT-00-0000-000PS40Z8
XMLBWT-00-0000-000US40Z8
S3
156
XMLBWT-00-0000-000PS30Z8
XMLBWT-00-0000-000US30Z8
Standard Order Codes and Bins (XM-L High Voltage ANSI Cool White, TJ = 85 °C)
XLamp XM-L HVW LED Standard Order Codes - White
Chromaticity
Kit
CCT
Minimum Luminous
Flux (lm) @ 44 mA*
Code
Flux (lm)
Order Codes
65 CRI Typical
ANSI Cool White (5000 K – 8300 K)
51
53
50
*
6200 K
6000 K
6200 K
T5
260
XMLHVW-Q0-0000-0000LT551
T4
240
XMLHVW-Q0-0000-0000LT451
T3
220
XMLHVW-Q0-0000-0000LT351
T2
200
XMLHVW-Q0-0000-0000LT251
T5
260
XMLHVW-Q0-0000-0000LT553
T4
240
XMLHVW-Q0-0000-0000LT453
T3
220
XMLHVW-Q0-0000-0000LT353
T2
200
XMLHVW-Q0-0000-0000LT253
T5
260
XMLHVW-Q0-0000-0000LT550
T4
240
XMLHVW-Q0-0000-0000LT450
T3
220
XMLHVW-Q0-0000-0000LT350
T2
200
XMLHVW-Q0-0000-0000LT250
Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
19
XLamp ® XM Family LED Binning & Labeling
Standard Order Codes and Bins (XM-L High Voltage ANSI Neutral White, TJ = 85 °C)
XLamp XM-L HVW LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum Luminous Flux
(lm) @ 44 mA*
Code
Flux (lm)
Order Codes
75 CRI Typical
80 CRI Minimum
ANSI Neutral White (3700 K – 5000 K)
E3
F4
E4
F5
E5
*
5000 K
4750 K
4500 K
4250 K
4000 K
T5
260
XMLHVW-Q0-0000-0000LT5E3
T4
240
XMLHVW-Q0-0000-0000LT4E3
T3
220
XMLHVW-Q0-0000-0000LT3E3
T2
200
XMLHVW-Q0-0000-0000LT2E3
S6
182
XMLHVW-Q0-0000-0000LS6E3
T5
260
XMLHVW-Q0-0000-0000LT5F4
T4
240
XMLHVW-Q0-0000-0000LT4F4
T3
220
XMLHVW-Q0-0000-0000LT3F4
T2
200
XMLHVW-Q0-0000-0000LT2F4
S6
182
XMLHVW-Q0-0000-0000LS6F4
T5
260
XMLHVW-Q0-0000-0000LT5E4
T4
240
XMLHVW-Q0-0000-0000LT4E4
T3
220
XMLHVW-Q0-0000-0000LT3E4
T2
200
XMLHVW-Q0-0000-0000LT2E4
S6
182
XMLHVW-Q0-0000-0000LS6E4
T3
220
XMLHVW-Q0-0000-0000LT3F5
T2
200
XMLHVW-Q0-0000-0000LT2F5
XMLHVW-Q0-0000-0000HT2F5
S6
182
XMLHVW-Q0-0000-0000LS6F5
XMLHVW-Q0-0000-0000HS6F5
XMLHVW-Q0-0000-0000HS5F5
S5
172
XMLHVW-Q0-0000-0000LS5F5
T3
220
XMLHVW-Q0-0000-0000LT3E5
T2
200
XMLHVW-Q0-0000-0000LT2E5
XMLHVW-Q0-0000-0000HT2E5
S6
182
XMLHVW-Q0-0000-0000LS6E5
XMLHVW-Q0-0000-0000HS6E5
S5
172
XMLHVW-Q0-0000-0000LS5E5
XMLHVW-Q0-0000-0000HS5E5
Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
20
XLamp ® XM Family LED Binning & Labeling
Standard Order Codes and Bins (XM-L High Voltage ANSI Warm White, TJ = 85 °C)
XLamp XM-L HVW LED Standard Kit Codes - White
Chromaticity
Kit
CCT
Minimum Luminous
Flux (lm) @ 44 mA*
Code
Flux (lm)
Order Codes
80 CRI Typical
80 CRI Minimum
ANSI Warm White (2700 K - 3750 K)
F6
E6
F7
E7
F8
E8
*
3750 K
3500 K
3250 K
3000 K
2850 K
2700 K
T3
220
XMLHVW-Q0-0000-0000LT3F6
T2
200
XMLHVW-Q0-0000-0000LT2F6
XMLHVW-Q0-0000-0000HT2F6
S6
182
XMLHVW-Q0-0000-0000LS6F6
XMLHVW-Q0-0000-0000HS6F6
S5
172
XMLHVW-Q0-0000-0000LS5F6
XMLHVW-Q0-0000-0000HS5F6
S4
164
XMLHVW-Q0-0000-0000LS4F6
XMLHVW-Q0-0000-0000HS4F6
T3
220
XMLHVW-Q0-0000-0000LT3E6
T2
200
XMLHVW-Q0-0000-0000LT2E6
XMLHVW-Q0-0000-0000HT2E6
S6
182
XMLHVW-Q0-0000-0000LS6E6
XMLHVW-Q0-0000-0000HS6E6
S5
172
XMLHVW-Q0-0000-0000LS5E6
XMLHVW-Q0-0000-0000HS5E6
S4
164
XMLHVW-Q0-0000-0000LS4E6
XMLHVW-Q0-0000-0000HS4E6
T3
220
XMLHVW-Q0-0000-0000LT3F7
T2
200
XMLHVW-Q0-0000-0000LT2F7
XMLHVW-Q0-0000-0000HT2F7
S6
182
XMLHVW-Q0-0000-0000LS6F7
XMLHVW-Q0-0000-0000HS6F7
S5
172
XMLHVW-Q0-0000-0000LS5F7
XMLHVW-Q0-0000-0000HS5F7
S4
164
XMLHVW-Q0-0000-0000LS4F7
XMLHVW-Q0-0000-0000HS4F7
S3
156
XMLHVW-Q0-0000-0000LS3F7
XMLHVW-Q0-0000-0000HS3F7
T3
220
XMLHVW-Q0-0000-0000LT3E7
T2
200
XMLHVW-Q0-0000-0000LT2E7
XMLHVW-Q0-0000-0000HT2E7
S6
182
XMLHVW-Q0-0000-0000LS6E7
XMLHVW-Q0-0000-0000HS6E7
S5
172
XMLHVW-Q0-0000-0000LS5E7
XMLHVW-Q0-0000-0000HS5E7
S4
164
XMLHVW-Q0-0000-0000LS4E7
XMLHVW-Q0-0000-0000HS4E7
S3
156
XMLHVW-Q0-0000-0000LS3E7
XMLHVW-Q0-0000-0000HS3E7
S6
182
XMLHVW-Q0-0000-0000LS6F8
XMLHVW-Q0-0000-0000HS6F8
S5
172
XMLHVW-Q0-0000-0000LS5F8
XMLHVW-Q0-0000-0000HS5F8
S4
164
XMLHVW-Q0-0000-0000LS4F8
XMLHVW-Q0-0000-0000HS4F8
S3
156
XMLHVW-Q0-0000-0000LS3F8
XMLHVW-Q0-0000-0000HS3F8
S2
148
XMLHVW-Q0-0000-0000LS2F8
XMLHVW-Q0-0000-0000HS2F8
S6
182
XMLHVW-Q0-0000-0000LS6E8
XMLHVW-Q0-0000-0000HS6E8
S5
172
XMLHVW-Q0-0000-0000LS5E8
XMLHVW-Q0-0000-0000HS5E8
S4
164
XMLHVW-Q0-0000-0000LS4E8
XMLHVW-Q0-0000-0000HS4E8
S3
156
XMLHVW-Q0-0000-0000LS3E8
XMLHVW-Q0-0000-0000HS3E8
S2
148
XMLHVW-Q0-0000-0000LS2E8
XMLHVW-Q0-0000-0000HS2E8
Cree XLamp XM Family LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
Copyright © 2010-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. This
document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information,
please contact Cree Sales at [email protected].
21