Description: The premium choice for ESD bench dissipative worksurfaces. Provides a durable and attractive ESD controlled dissipative worksurface. Resists hot solder and most solvents; exceeds NEMA standards for wear resistance. Conductive layer provides superior charge dissipation and zero voltage suppression. Electrical Properties: Because the electrical properties of many high pressure laminates have some degree of humidity dependence, all high pressure laminate materials should be carefully tested for adequate performance at low humidity prior to selection and installation. Property Rtt: Rtg: RVOL: Charge Decay: Value 1 x 106 to < 1 x 1010 ohms 1 x 106 to < 1 x 1010 ohms Less than 108 ohms <0.009 seconds Test Method ANSI/ESD S4.1 ANSI/ESD S4.1 ASTM-D257 FTMS-101C, Method 4046 Measured at 50% and 12% relative humidity. Test reports available upon request. Color and texture may vary between lots and mills. Specifications: Disclaimer: All statements, technical data, and recommendations contained herein are based upon tests we believe to be reliable. However, the accuracy or completeness thereof is not guaranteed. The proper and correct applications of products and data is the responsibility of the user. Statements or recommendations not contained herein shall have no force or effect unless embodied in a written agreement signed by authorized officers of Desco Industries, Inc. Construction: High pressure thermoset amino resin laminate Look for the Micastat® Thickness: Nominal 0.038" (0.96mm) brand on Desco laminate Radius: 1.5" radius corner sheets - for your Surface: Top - non-glare matte finish Post Forming: 5/8" radius, NEMA LD 3.14 protection and auditing Weight: 0.31 lbs/sq ft (0.151 grams/cm2) purposes. Abrasion Resistance: Exceeds NEMA LD 3-3.01 Standards Chemical Resistance: Unaffected by most solvents Heat Resistance: NEMA LD 3-3.06, 160°F (71°C) continuous Cleaning: For optimum electrical performance of your ESD worksurface, clean regularly with an ESD mat cleaner. We suggest using Reztore™ Surface & Mat Cleaner, Item #10435 or Static-Wipes Item #10600. Do not use cleaners with silicone. Silicone buildup will create an insulative film on the surface. Grounding: This material must be properly grounded for optimal electrical performance. See Laminate Grounding Systems and Technical Bulletin TB-2091 - Micastat® Static protective laminate: Installation and maintenance. Common Point Ground 09826 RoHS 2 and REACH Statement None of the RoHS 2 restricted materials or REACH substances of very high concern are intentionally added in manufacturing this product. Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE. Limited Warranty: Desco warrants for one year that Micastat® dissipative laminate products will be free of defects in materials and workmanship and will guarantee dissipative / conductive laminate properties for the life of the product. Damage to laminate caused by misuse of any kind, including using inappropriate cleaners is not covered by Desco Limited Warranty. Tolerance for Kits only: Width ± 0.250" Length ± 0.250" every 1 linear foot of running material. 3/8" Female Snap Installed Bench Pad Micastat® Sheet Micastat® Kits - Item Numbers Micastat® Sheets - Item Numbers Color 24" x 48" 24" x 36" Beige 10350 10310 Blue 10384 10344 Grey 10382 10342 Grounding Hardware Included Special sizes available upon request. Top -- non-glare matte finish. Bottom -- Double sided tape to attach. Tolerance for Sheets only: Published Sheet sizes are oversized typically by ¾" to 1.0" in both width and length directions Published Dimensions are ± 0.250" Size 30" x 10' 30" x 12' 36" x 8' 36" x 10' 36" x 12' 48" x 8' 48" x 12' 60" x 12' Beige 10200 10202 10203 10204 10206 10208 10212 10215 Blue 10180 10181 10182 10183 10184 10185 10187 10190 White 10240 10242 10243 10244 10246 10248 10252 10255 Top -- non-glare matte finish. Grounding hardware not included. Micastat® Ground Kits 14246 & 14244 are recommended. Ask for Technical Bulletin TB-2091 for further information. Micastat® Dissipative Laminate DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 Employee Owned Special sizes available upon request. Specifications and procedures subject to change without notice. DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 © 2013 DESCO INDUSTRIES INC. Grey 10290 10291 10292 10293 10294 10295 10297 10300 MATERIAL TYPE MICASTAT DRAWING 10200 DATE: June 2013