Features -------------- -- -- -- W SPECIFICATIONS -- -- -- - Properties Electrostatic Decay Surface Resistance Surface Resistance, Low R.H. Cut-off High-Voltage Discharge Resistance Static Shielding Charged Device Model (CDM) Safety Current-Carrying Hazard Corrosivity Antistat Transfer Water & Isopropyl Alcohol Extraction Tests for Antistat Permanence Sloughing Test Recyclability Biodegradability Volume Conductivity Shelf Life -- - -- - --L - -- -- -- D - Typical Values 0.01 seconds at 72°F and 11.8% R.H. 10E6 - 10E8 ohms/sq. after 11 days at 68°F and 12% R.H. for surface. 10E3 - 10E4 ohms/sq. for buried shielding layer 4% R.H. Failure rate 0/5 (no oxide damage in five consecutive tests) 99.9% attenuation at 10kV; 99.6% attenuation at 30kV RTG >10E7 ohms at 86% R.H. or less 10E3 mA at 110V; 10E3 mA at 220V Contains 1-3 ppm reducible sulfur No transfer Surface resistance 10E8 - 10E9 ohms/square at 74°F and 36% R.H. Negligible surface damage at 10 cycles and <5% of surface damage at 200 cycles in Taber Abrasion Test. No conductive particles abrased from surface Complete recyclability of package Biodegradation in or on moist soil Conductivity from wall to wall as well as across surface to assure permanence of the antistatic property Indefinite • Provides ESD and physical protection for ESD sensitive compnonets; with lid in place, shielding creates “Faraday Cage” restricting electrostatic charges to exterior to ship or store ESD sensitive items outside an ESD protected area • Available with optional lid, steel reinforcing frame for additional strength and durability, ESD handles, and permanently static dissipative bottom foam pad for cushioning • Impregnated corrugated material; greater durability than coated or printed material • Constructed with double sides, double (boxes under 6” deep) or triple (boxes over 6” deep) ends, and single (boxes under 6” deep) or double (boxes over 6” deep) thickness bottom for greater durability • Static dissiapative surface of 10E6 - 10E8 ohms - minimizing the potential of rapid discharge or sparking • Buried shielding layer minimizing the potential of sloughing and rub-off contamination • Made from 100% recycled material, and is 100% recyclable • No tooling cost • Easy assebmly without the need for tape, glue, or staples • Reusable, ensuring low cost Test Procedures/Method FED-STD-101, Method 4046 See reverse side for available sizes. ASTM D257 Rockwell International Test Report of December 20, 1991 Rockwell International Test Report of December 20, 1991 EIA 541, appendix E, capacitive probe test Rockwell International Test Report of December 20, 1991 ESD from A to Z FED-STD-101, Method 3005 for reducible sulfur Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 ASTM D4060 at 70 rpm with CS-17 abrasive-coated wheels and 1000 grams load Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 Made in the United States of America STORAGE CONTAINERS PROTEKTIVE PAK 13520 MONTE VISTA AVENUE, CHINO, CA 91710 PHONE (909) 627-2578, FAX (909) 363-7331 ProtektivePak.com © 2011 DESCO INDUSTRIES INC. Employee Owned DRAWING NUMBER 37500 DATE: September 2011 Item No. REF# Box Size I.D. - L x W x D Handles Lid Wire Foam 37508 411-BX 16-7/8 x 10 x 3-1/2 IN (429 x 254 x 89 MM) N/A 37550 N/A 37451 37501 401-BX 16-7/8 x 10 x 5-3/8 IN (429 x 254 x 137 MM) N/A 37550 N/A 37451 37509 422-BX 17 x 9-7/8 x 2-1/2 IN (432 x 254 x 137 MM) N/A 37550 N/A 37451 37500 400-BX 17 x 9-7/8 x 7-1/4 IN (432 x 251 x 184 MM) 37450 37550 N/A 37451 37502 402-BX 17 x 9-7/8 x 11-5/8 IN (432 x 251 x 286 MM) 37450 37550 N/A 37451 37511 436-BX 17 x 13 x 6-3/4 IN (432 x 330 x 171 MM) 37450 37551 37456 37452 37512 438-BX 17 x 13 x 8-3/4 IN (432 x 330 x 222 MM) 37450 37551 37456 37452 37513 439-BX 17 x 13 x 10-3/4 IN (432 x 330 x 273 MM) 37450 37551 37456 37452 37503 403-BX 17 x 13 x 12-5/8 IN (432 x 330 x 321 MM) 37450 37551 37456 37452 37510• 434-BX 17 x 13 x 14-3/4 IN (432 x 330 x 375 MM) 37450 37551 37456 37452 37520• 456-BX 18-3/8 x 12-3/8 x 6-3/4 IN (467 x 314 x 171 MM) 37450 37553 37458 37454 37522• 458-BX 18-3/8 x 12-3/8 x 8-3/4 IN (467 x 314 x 222 MM) 37450 37553 37458 37454 37523• 459-BX 18-3/8 x 12-3/8 x 10-3/4 IN (467 x 314 x 273 MM) 37450 37553 37458 37454 37519• 455-BX 18-3/8 x 12-3/8 x 14-3/4 IN (467 x 314 x 374 MM) 37450 37553 37458 37454 37518 452-BX 18-3/8 x 12-3/8 x 12-3/4 IN (467 x 314 x 324 MM) 37450 37553 37458 37454 37521 457-BX 18-3/8 x 12-3/8 x 17-1/8 IN (467 x 314 x 435 MM) 37450 37553 37458 37454 37505 405-BX 18-1/2 x 12-3/8 x 18-3/4 IN (470 x 314 x 476 MM) 37450 37553 37458 37454 37506 406-BX 18-5/8 x 15 x 5-7/8 IN (473 x 381 x 149 MM) 37450 37554 37459 37455 37527 468-BX 18-5/8 x 15 x 8 IN (473 x 381 x 203 MM) 37450 37554 37459 37455 37524 460-BX 18-5/8 x 15 x 10 IN (473 x 381 x 254 MM) 37450 37554 37459 37455 37525 462-BX 18-5/8 x 15 x 12 IN (473 x 381 x 305 MM) 37450 37554 37459 37455 37526 464-BX 18-5/8 x 15 x 14 IN (473 x 381 x 356 MM) 37450 37554 37459 37455 37516 446-BX 22-7/8 x 12-7/8 x 6 IN (581 x 327 x 152 MM) 37450 37552 37457 37453 37517 448-BX 22-7/8 x 12-7/8 x 8 IN (581 x 327 x 203 MM) 37450 37552 37457 37453 37514 440-BX 22-7/8 x 12-7/8 x 10 IN (581 x 327 x 254 MM) 37450 37552 37457 37453 37504 404-BX 22-7/8 x 12-7/8 x 12-5/8 IN (581 x 327 x 321 MM) 37450 37552 37457 37453 37515 445-BX 22-7/8 x 12-7/8 x 15-1/4 IN (581 x 327 x 387 MM) 37450 37552 37457 37453 37507 408-BX 22-7/8 x 12-7/8 x 18-1/4 IN (581 x 327 x 464 MM) 37450 37552 37457 37453 37530 21-7/8 x 18-7/8 x 4-1/4 IN (556 x 479 x 108 MM) N/A 37557 N/A N/A 37532 22 x 18-7/8 x 8 IN (559 x 480 x 203 MM) N/A 37557 NA N/A © 2011 DESCO INDUSTRIES INC. Employee Owned ACCESSORIES • • • ESD Handles Wire Frames Foam Pads Conductive Plastic Handles Steel wire perimeter reinforcing frame for extra strength and durability Permanently static dissipative crosslink bottom foam to cushion circuit boards Item 37450 37451 37453 37454 37452 37455 37458 37457 37456 37459 Description ESD Handles Bottom Foam Bottom Foam Bottom Foam Bottom Foam Bottom Foam Wire Frame Wire Frame Wire Frame Wire Frame Size 1” x 4” 1/4” x 9-3/4” x 16-3/4” 1/4” x 12-1/4” x 22-5/8” 1/4” x 12-1/2” x 18-1/2” 1/4” x 12-5/8” x 16-5/8” 1/4” x 14-3/4” x 18-3/8” 1/4” x 12-1/2” x 18-11/16” 1/4” x 12-3/4” x 23-1/8” 1/4” x 13-1/4” x 17-1/4” 1/4” x 15-1/8” x 18-13/16” • These items made to order