--- Features --- • Portable ESD worksurface that can also be used to transport populated, unsoldered circuit boards --- • Static dissipative foam (RTT 10E6 - 10E8 ohms) laminated to Protektive Pak® impregnated corrugated material for greater durability --- W ----- - - - - - - - - - - - - - - - - - - - - - -L- - - - - - - - - - - - - - - - - - - - - - - - • Foam is shuntable, component leads can be kept at equipotential and more stable when moved • Includes 10mm (3/8”) grounding snap • Static dissipative material 10E6 - 10E8 ohms • Buried shielding layer minimizes sloughing and rub-off contamination • Made in America SPECIFICATIONS FOR CORRUGATED MATERIAL: Properties Electrostatic Decay Surface Resistance High-Voltage Discharge Resistance Static Shielding Charged Device Model (CDM) Safety Corrosivity Sloughing Test Recyclability Biodegradability Volume Conductivity Shelf Life Typical Values 0.01 seconds at 72°F and 11.8% R.H. 10E6 - 10E8 ohms/sq. after 11 days at 68°F and 12% R.H. for surface. 10E3 - 10E4 ohms/sq. for buried shielding layer Failure rate 0/5 (no oxide damage in five consecutive tests) 99.9% attenuation at 10kV; 99.6% attenuation at 30kV RTG >10E7 ohms at 86% R.H. or less Contains 1-3 ppm reducible sulfur Negligible surface damage at 10 cycles and <5% of surface damage at 200 cycles in Taber Abrasion Test. No conductive particles abrased from surface Complete recyclability of package Biodegradation in or on moist soil Conductivity from wall to wall as well as across surface to assure permanence of the antistatic property Indefinite SPECIFICATIONS FOR FOAM: Property Density Surface Resistivity Corrosivity Water Extract Total Chlorine Recommended Operating Temperature Range Tear Strength Tensile Strength Test Method ASTM D3575-91 EOS/ESD DS111-1993 TS 1021BA (UK MOD) TS 1021BA (UK MOD) TS 1021BA (UK MOD) Results 1.9 lb/ft3 10E7 - 10E9 ohms/sq Pass Pass Pass Internal ASTM D3575-91 ASTM D2575-91 +200°F to -95°F 14 lbf/in 44 psi Test Procedures/Method FED-STD-101, Method 4046 ASTM D257 Rockwell International Test Report of December 20, 1991 EIA 541, appendix E, capacitive probe test Rockwell International Test Report of December 20, 1991 FED-STD-101, Method 3005 for reducible sulfur ASTM D4060 at 70 rpm with CS-17 abrasive-coated wheels and 1000 grams load Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 Item No. Size - L x W Snap 37800 12 x 18 Male 39852 12 x 18 Female 37801 18 x 24 Male 39854 18 x 24 Female TEK-MATE™ BOARD HANDLERS PROTEKTIVE PAK 13520 MONTE VISTA AVENUE, CHINO, CA 91710 PHONE (909) 627-2578, FAX (909) 363-7331 ProtektivePak.com © 2006 DESCO INDUSTRIES INC. Employee Owned Made in America DRAWING NUMBER 37800 DATE: 11/06