Features ---------------- ---- W D ----- ----- ----- ----L ----- ----- ----- ----- • Basic Protektive Pak tray • Great container for Kanban Item No. Size I.D. - L x W x D 37650 17-3/4 x 10-3/4 x 2-1/8 37651 17-7/8 x 13-5/8 x 2-1/8 37653 19-1/4 x 13-1/8 x 2-1/8 37654 19-3/8 x 15-3/4 x 2-1/8 37652 23-1/2 x 13-3/8 x 2-1/8 - SPECIFICATIONS Properties Electrostatic Decay Surface Resistivity Surface Resistivity, Low R.H. Cut-off High-Voltage Discharge Resistance Static Shielding Charged Device Model (CDM) Safety Current-Carrying Hazard Corrosivity Antistat Transfer Water & Isopropyl Alcohol Extraction Tests for Antistat Permanence Sloughing Test Recyclability Biodegradability Volume Conductivity Shelf Life Typical Values 0.01 seconds at 72°F and 11.8% R.H. 107 - 108 ohms/sq. after 11 days at 68°F and 12% R.H. for surface. 103 - 104 ohms/sq. for buried shielding layer 4% R.H. Failure rate 0/5 (no oxide damage in five consecutive tests) 99.9% attenuation at 10kV; 99.6% attenuation at 30kV RTG >107 ohms at 86% R.H. or less 103 mA at 110V; 103 mA at 220V Contains 1-3 ppm reducible sulfur No transfer Surface resistivity 108 - 109 ohms/square at 74°F and 36% R.H. Negligible surface damage at 10 cycles and <5% of surface damage at 200 cycles in Taber Abrasion Test. No conductive particles abrased from surface Complete recyclability of package Biodegradation in or on moist soil Conductivity from wall to wall as well as across surface to assure permanence of the antistatic property Indefinite Test Procedures/Method FED-STD-101, Method 4046 ASTM D257 Rockwell International Test Report of December 20, 1991 Rockwell International Test Report of December 20, 1991 EIA 541, appendix E, capacitive probe test Rockwell International Test Report of December 20, 1991 ESD from A to Z FED-STD-101, Method 3005 for reducible sulfur Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 ASTM D4060 at 70 rpm with CS-17 abrasive-coated wheels and 1000 grams load Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 Rockwell International Test Report of January 8, 1992 Made in America BOARD HANDLER TRAYS PROTEKTIVE PAK 13520 MONTE VISTA AVENUE, CHINO, CA 91710 PHONE (909) 627-2578, FAX (909) 363-7331 www.protektivepak.com © 2005 DESCO INDUSTRIES INC. Employee Owned DRAWING NUMBER 37650 DATE: 7/05