ETC 500ASA

Cooper Hand Tools
Electronics Pliers, Cutters and Tweezers
1
Content
Page
Tweezers
.......................................................................................
Pointed Tips
Flat Round Tips
Tweezers with Ergonomic Handles
SMD Tweezers
Special Gripping Tweezer
Wafer Tweezers
Cutting Tweezers
Stripping Tweezers
Extraction Tweezers/Connector Tools
Cutters
.......................................................................................
. . . . . . . 4-16
.......
5-10
10-11
11
12-13
13
14
15
15
16
. . . . . .17-36
........
Side Cutters
Side Cutters with Ergonomic Handles
21-27
27-28
Tip Cutters
Tip Cutters with Ergonomic Handles
29-33
33
Pneumatic Side Cutters and Tip Cutters
34-35
Distance Cutters
36
Pliers
.......................................................................................
. . . . . .37-39
........
EROP
. . . . . . . . . . Cutters
. . . . . . . . . . . . . and
. . . . . . . .Pliers
........................................................
. . . . . .40-42
........
Stripping
. . . . . . . . . . . . . . . . . Tools
......................................................................
. . . . . .42-43
........
Pre-Forming
. . . . . . . . . . . . . . . . . . . . . .Tools
.................................................................
. . . . . .44-48
........
For Passive Components
For Active Components
IC
. . . . .and
. . . . . . . SMD
. . . . . . . . .Tools
..................................................................
Inserting and Extracting
Straightening
Cutting + Trimming
44-45
46-48
. . . . . .48-49
........
48
48
49
Fibre
. . . . . . . . . .Optic
. . . . . . . . . .Tools
...................................................................
. . . . . . . . . . .50
...
Kits
.......................................................................................
. . . . . . . . . . .51
...
Vacuum
. . . . . . . . . . . . . . .Manipulator
........................................................................
. . . . . .52-55
........
Index
.......................................................................................
. . . . . .58-59
........
Erem Tools - Precision Made in Switzerland
P
recision is sought by many but achieved by few. The quality and performance of Erem hand tools is the result of more than 25 years of research
and manufacturing expertise. Erem is constantly innovating and developing
new tools for use in areas as diverse as electronics, aviation, biology, medical
(cardio-vascular, cannulae applications), watch and clock industry, telecoms.
Although your initial investment in Erem tools may be higher than some
other tools, the final cost based on medium to long term use will be lower
due to the economy resulting from the quality of the tools and in the
case of the cutters, the free of charge resharpening. The inherent precision of the tools will be reflected in the quality
of your products.
3
Erem Tweezers
E
rem tweeezers are high precision tools of constant high quality. Precise
finished and symmetrical tips together with easy handling and perfect
balance makes them outstanding tools. The range of Erem tweezers covers
a wide diversity of applications. It is produced in many shapes and can be
manufactured from different materials. The most popular models are available in a lower cost economy (SL) range. In all models,
the type number of the tweezers is stamped, not printed.
The Material
Erem offers a wide variety of materials, carbon steel, stainless steel, Erem
special stainless steel, Nickel plated, Brass or Titanium. The most common ones‘
are explained below:
Carbon Steel
Carbon steel tweezers have hard tips but the rust resistance is low and they
are magnetic. Carbon steel tweezers have no suffix.
Stainless Steel
Tweezers from stainless steel have strong tips and are rust resistant but are not
as hard and longlasting as carbon steel tweezers. Stainless steel tweezers have the suffix „S“.
Erem Special Stainless Steel
This grade of steel is a non magnetic, rust resistant, anti acid alloy.
It is temperature resistant up to 300°C.
Tweezers from special stainless steel have the suffix „SA“
Coating
The Pyroplast coating is an exclusive by Erem. The advantages are:
- heat resistance up to 500°C (932°F), almost twice as much as PTFE, Cralon, etc.
- no capillary effect on tips while soldering (non-stick property)
- no contamination caused by positive or negative charge
- hydrophobic
- radiation resistant
- thickness 60-80 µ
the suffix is „PYR“.
Note: The Pyroplast coating is not available for all Erem tweezers. It is made to order
and needs a minimum order quantity. Please ask for further information.
Ergonomic
Developed by Erem, tweezers with ergonomically shaped handles to alleviate the problem
of Repetitive Strain Injuries (RSI) and reduce operator fatigue. The range has been
selected to include the most popular tip shapes (see page 11). The main features are:
- ergonomic design for operator comfort and ease of control
- two colour, thermally insulated soft grip handles moulded from a synthetic material
- ESD safe
- the grips absorb heat for additional user protection
- manufactured from non magnetic, acid resistant, stainless steel alloy
- supplied in a rigid, transparent plastic box for protection and storage
The prefix for ergonomic tweezers is “E”.
Suffix
None
carbon steel
E (Prefix) ergonomic handles
M
Brass, soft material to avoid damage, no sparks
N
Nickel-Silver alloy
PYR
Pyroplast coating
RU
anti adhesive coating
S
stainless steel
SA, CA special stainless steel, non-magnetic, acid resistant
SL
economy version
TA
Titanium, non-magnetic, lightweight, high temperature resistant
Z
Nickel plated
4
PRECISION TWEEZERS
Pointed Tips Straight
Pointed Tips Straight
Main applications:
for conventional and precision handling of small parts
like tissue, components,
wires. For tasks in micro
electronics industry, medicine, laboratories and other
applications where high
precision is required.
Length 80 mm
Model
M5S
Length
80 mm
Weight
6g
Description
Stainless steel, anti-glare finish
Micro tweezers, very small, very fine tips, e.g. for work under
microscope
Length 108 mm
Model
Length
ACSA
108 mm
Weight
16 g
Description
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with serrated grips for anti-slip handling. For
bending and handling.
20AS
108 mm
12 g
Stainless steel, anti-glare finish
Precision tweezers with serrated grips and inside serrated tips
for anti-slip handling. Guide pin to avoid tip overlapping.
For bending and handling.
Length 110 mm
Model
3CS
Length
110 mm
Weight
11 g
Description
Stainless steel, anti-glare finish
Precision tweezers with long tips for delicate circuit board
assembly.
3CSA
110 mm
11 g
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers for delicate circuit board assembly.
3CSASL
110 mm
11 g
Special stainless steel, anti-glare finish, non-magnetic
Same as 3CSA but economy model.
3CTA
110 mm
8g
Titanium, non-magnetic
Same as 3CSA but Titanium for heat resistance and light weight.
53CSA
110 mm
11 g
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with crush-proof design for handling
of delicate parts.
5
PRECISION TWEEZERS
Pointed Tips Straight
Length 120 mm
Model
3SA
Length
120 mm
Weight
14 g
Description
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers for micro electronics. Precision work.
3SASL
120 mm
14 g
Special stainless steel, anti-glare finish, non-magnetic
Same as 3SA but economy model.
1SA
120 mm
14 g
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers for general use.
1SASL
120 mm
14 g
Special stainless steel, anti-glare finish, non-magnetic
Same as 1SA but economy model.
OOSA
120 mm
20 g
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers for general purpose e.g. electronic assembly,
very sturdy.
OOSASL
120 mm
20 g
Special stainless steel, anti-glare finish, non-magnetic
Same as 00SA but economy model.
OOCSA
120 mm
18 g
Special stainless steel, anti-glare finish, non-magnetic
Same as 00SA but smaller version.
OOBSA
120 mm
20 g
Special stainless steel, anti-glare finish, non-magnetic
Same as 00SA but with serrated grips.
OODSA
120 mm
20 g
Special stainless steel, anti-glare finish, non-magnetic
Same as 00SA but with serrated grips and inside serrated tips.
64SA
120 mm
17 g
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with serrated grips.
11N
120 mm
17 g
Nickel-Silver alloy, anti-glare finish, non-magnetic
Precision tweezers Nickel-Silver alloy, perfect non-magnetic.
AAZ
120 mm
16 g
Nickel plated
Precision tweezers Nickel plated, for electronics assembly.
Length 125 mm
Model
Length
Weight
AAS
125 mm
16 g
Description
Stainless steel, anti-glare finish
Precision tweezers with strong but fine tips. For universal use.
AASSL
125 mm
16 g
Stainless steel, anti-glare finish
Same as AAS but economy model.
6
PRECISION TWEEZERS
Pointed Tips Straight
Model
AASA
Length
125 mm
Weight
16 g
Description
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with strong but fine tips. For universal use.
AASASL
125 mm
16 g
Special stainless steel, anti-glare finish, non-magnetic
Same as AASA but economy model.
AM
125 mm
17 g
Brass, polished
Precision tweezers brass. Soft metal protects sensitive
parts against damage. No sparks.
Length 130 mm
Model
Length
Weight
249SA
130 mm
20 g
Description
Special stainless steel / PPS, anti-glare finish, nonmagnetic ESD safe, suitable for fibre optics
Precision tweezers with serrated grips and synthetic tips (PPS).
Heat resistant up to 250°C (480°F). Resistant to acids and solder.
Waterproof, ESD safe. Does not damage fibre optic cores.
249CER
130 mm
24 g
Special stainless steel / Ceramic anti-glare finish, nonmagnetic
Same as 249SA but with Ceramic tips for heat resistance
up to 900°C (1500°F).
Length 140 mm
Model
RRS
Length
140 mm
Weight
30 g
Description
Stainless steel, anti-glare finish
Precision tweezers, long version, very strong.
SSSA
140 mm
11 g
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with narrow grips and low tension. Extra long
for use near heat, die attachment.
SSSASL
140 mm
11 g
Special stainless steel, anti-glare finish, non-magnetic
Same as SSSA but economy model.
Length 150 mm
Model
29SA
Length
150 mm
Weight
26 g
Description
Special stainless steel, anti-glare finish, non-magnetic,
reverse action
Precision tweezers with fibre-grip handles for heat
protection. Reverse action for permanent holding parts.
Length 160 mm
Model
21SA
Length
160 mm
Weight
23 g
Description
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers, long version, with serrated grips and inside serrated tips, strong.
7
PRECISION TWEEZERS
Pointed Tips Straight Relieved
Pointed Tips Straight Relieved
Main application:
for better product visibility
e.g. under microscope or
working in confined areas,
for handling tiny components.
Length 90 mm
Model
M4AS
Length
90 mm
Weight
9g
Description
Stainless steel, anti-glare finish
Micro tweezers with very small, very fine tips, e.g. for working
under microscope or handling tiny parts in HF assembly. Strong tips
due to hardened stainless steel.
Length 110 mm
Model
4SA
Length
110 mm
Weight
13 g
Description
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with very fine points..
4SASL
110 mm
13 g
Special stainless steel, anti-glare finish, non-magnetic
Same as 4SA but economy model.
Length 115 mm
Model
5MBS
Length
115 mm
Weight
12 g
Description
Stainless steel, anti-glare finish
Precision tweezers with extremely fine tips (~ 0,03 x 0,07 mm)
for use in dissection procedures and handling of very small
samples e.g. under microscope. Only for use with soft materials.
5FSA
115 mm
12 g
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with extremely fine tips (~ 0,05 x 0,1 mm)
for use in dissection procedures and handling of very small
samples e.g. under microscope. Only for use with soft materials.
5SA
115 mm
12 g
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with very fine tips e.g. for handling fine wires.
5SASL
115 mm
12 g
Special stainless steel, anti-glare finish, non-magnetic
Same as 5SA but economy model
2SA
115 mm
16 g
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with medium tips.
2SASL
115 mm
16 g
Special stainless steel, anti-glare finish, non-magnetic
Same as 2SA but economy model.
8
PRECISION TWEEZERS
Pointed Tips Straight Relieved
Length 120 mm
Model
258SA
Length
120 mm
Weight
15 g
Description
Special stainless steel/PPS, anti-glare finish, nonmagnetic, ESD safe
Precision tweezers with serrated grips and synthetic tips (PPS).
Heat resistant up to 250°C (480°F). Resistant to acids and solder.
Waterproof, ESD safe.
Pointed Tips Bent
Pointed Tips Bent
Main application:
for better product visibility
and handling e.g. working
in confined areas and under
microscope.
Length 110 mm
Model
3CBS
Length
110 mm
Weight
11 g
Description
<) 40°, stainless steel, anti-glare finish
Precision tweezers bent for delicate circuit board assembly.
Length 115 mm
Model
5CSA
Length
115 mm
Weight
12 g
Description
<) 30°, special stainless steel, anti-glare finish,
non-magnetic
5BSA
115 mm
12 g
51SA
115 mm
12 g
51SASL
115 mm
12 g
5ASA
115 mm
12 g
Same as 51SA but economy model.
<) 15°, special stainless steel, anti-glare finish,
non-magnetic
5ASASL
115 mm
12 g
Precision tweezers oblique, relieved. Fine tips.
<) 15°, special stainless steel, anti-glare finish,
non-magnetic
Precision tweezers curved, relieved.
<) 30°, special stainless steel, anti-glare finish,
non-magnetic
Precision tweezers curved, relieved.
<) 30°, special stainless steel, anti-glare finish,
non-magnetic
Precision tweezers curved, relieved. Very fine tips.
<) 30°, special stainless steel, anti-glare finish,
non-magnetic
Same as 5 ASA but economy model.
9
PRECISION TWEEZERS
Pointed Tips Bent
Length 120 mm
Model
7SA
Length
120 mm
Weight
15 g
Description
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers curved, relieved.
For easy handling in confined areas.
7SASL
120 mm
15 g
Special stainless steel, anti-glare finish, non-magnetic
Same as 7SA but economy model.
Length 140 mm
Model
65ASA
Length
140 mm
Weight
11 g
Description
<) 50°, special stainless steel, anti-glare finish,
non-magnetic
Precision tweezers bent. Very fine points.
For handling extra fine components.
Length 150 mm
Model
24SA
Length
150 mm
Weight
22 g
Description
<) 40°, special stainless steel, anti-glare finish, non-magnetic
Precision tweezers bent. Serrated grips and inside serrated tips.
Alignment pin. Useful for all soldering jobs and assembly.
30SA
150 mm
26 g
<) 50°, special stainless steel, anti-glare finish,
non-magnetic, reverse action
Precision tweezers bent. With fibre-grip handles for heat protection. Reverse action for permanent holding parts. Useful e.g. for
soldering jobs.
Flat Round Tips Straight
Flat Round Tips Straight
Main application:
for conventional holding
and gripping applications.
Length 120 mm
Model
2ASA
Length
120 mm
Weight
15 g
Description
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with medium tips for gripping.
10
PRECISION TWEEZERS
Flat Round Tips Straight
Model
2ASASL
Length
120 mm
Weight
15 g
Description
Special stainless steel, anti-glare finish, non-magnetic
Same as 2ASA but economy model.
2ASASLT
120 mm
16 g
2ASARU
120 mm
16 g
Special stainless steel/PTFE,coated, anti-glare finish,
non-magnetic
Same as 2ASA but PTFE, coated tips for handling delicate parts.
Special stainless steel/coated, anti-glare finish, non-magnetic
Same as 2ASA but coated tips for handling adhesive parts, gaskets,
Kapton ribbons, labels with negligible capillary effect.
25SA
120 mm
15 g
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with flat round tips. For gripping.
52ASA
120 mm
15 g
Special stainless steel, anti-glare finish, non-magnetic
Precision tweezers with crush-proof design for handling
of delicate parts.
Precision Tweezers with Ergomomic Handles*
Main applications:
Thermally insulated soft
grips, ESD safe, ergonomically shaped to reduce operator’s hand fatigue.
Model
E5SA
Length
120 mm
Weight
25 g
Description
Special stainless steel, ergonomic handles, non-magnetic,
ESD-safe
Ergonomic precision tweezers straight, very fine tips, e.g. for handling fine wires.
E3CSA
120 mm
25 g
Special stainless steel, ergonomic handles, non-magnetic,
ESD-safe
Ergonomic precision tweezers straight, long fine tips, for delicate
circuit board assembly.
E00SA
120 mm
30 g
Special stainless steel, ergonomic handles, non-magnetic,
ESD-safe
Ergonomic precision tweezers straight, fine tips, for general use.
Very sturdy.
E7SA
120 mm
28 g
Special stainless steel, ergonomic handles, non-magnetic,
ESD-safe
Ergonomic precision tweezers curved, fine tips, for easy manipulation in confined areas.
E2ASA
120 mm
28 g
Special stainless steel, ergonomic handles, non-magnetic,
ESD-safe
Ergonomic precision tweezers straight, flat round tips, for gripping.
Note: colour coatings subject to variations without prior notice. * Ergonomic features see page 4.
11
SMD TWEEZERS
SMD Tweezers
Angled Head
Main application:
for handling chips or miniature SMD components.
For mounting on SMD
boards or Ceramic substrates.
Model
102ACA
Length
115 mm
Weight
15 g
Description
Special stainless steel, anti-glare finish, non-magnetic
SMD tweezers with angled head and blunt edges to avoid board
damage. For handling small components, mounting on SMD boards,
hybrids ICs, watch hands, etc.
102ACAX
115 mm
14 g
Special stainless steel, anti-glare finish, non-magnetic,
reverse action
Same as 102ACA but reverse action.
103ACA
115 mm
15 g
45°, special stainless steel, anti-glare finish,
non-magnetic
SMD tweezers with angled head and blunt edges to avoid board
damage. For handling of small components.
Rounded Head
39SA
Model
Length
110 mm
Weight
15 g
Description
40 SA
110 mm
15 g
Ø 0,4 mm, special stainless steel, anti-glare finish,
non-magnetic
150SAMF
120 mm
13 g
Ø 1,2 – 2,5 mm, special stainless steel, anti-glare finish,
non-magnetic
Ø 0,3 mm, special stainless steel, anti-glare finish,
non-magnetic
Straight, serrated grips. For gripping wires and small cylindrical parts.
Straight, serrated grips. For gripping wires and small cylindrical parts.
SMD tweezers straight, serrated grips. For gripping small cylindrical
parts, mini MELFs. Very narrow tips.
150SAD
120 mm
13 g
Ø 1,5 – 3 mm, special stainless steel, anti-glare finish,
non-magnetic
SMD tweezers straight, serrated grips.
For gripping small cylindrical parts.
12
SMD TWEEZERS
Rounded Head
Model
Length
Weight
150SA
120 mm
13 g
Description
Ø 1,5 – 3 mm, special stainless steel, anti-glare finish,
non-magnetic
SMD tweezers straight, serrated grips.
For gripping small cylindrical parts.
151SA
120 mm
13 g
Ø 3 – 6 mm, special stainless steel, anti-glare finish,
non-magnetic
SMD tweezers straight, serrated grips.
For gripping small cylindrical parts.
Rounded Head Bent
Model
Length
Weight
32BSA
115 mm
17 g
Description
45°, Ø 5 mm, special stainless steel, anti-glare finish,
non-magnetic
SMD tweezers bent. For small cylindrical components or insulated
fibres.
32BSA20
115 mm
17 g
45°, Ø 2 mm, special stainless steel, anti-glare finish,
non-magnetic
Same as 32BSA but Ø 2 mm.
32BSA25
115 mm
17 g
45°, Ø 2,5 mm, special stainless steel, anti-glare finish,
non-magnetic
Same as 32BSA but Ø 2,5 mm.
150SAMB
115 mm
13 g
40°, Ø 1,2 - 2,5 mm, special stainless steel, anti-glare
finish, non-magnetic
SMD tweezers bent, serrated grips. For gripping small cylindrical
parts.
Special Gripping Tweezers
Model
940AS
Length
120 mm
Weight
17 g
Description
Stainless steel, anti-glare finish
Gripping tweezers with locking clip.
For various applications. Resists a tensile force of ~ 5 kg.
13
WAFER TWEEZERS
Wafer Tweezers
Wafer Tweezers
Main application:
for handling wafers from
3” to 6”. Different coatings
or sizes on request.
Model
91SA
Length
A
125 mm 12 mm
B
7 mm
Weight
15 g
Description
3”- 4”, special stainless steel, anti-glare finish,
non-magnetic
Standard wafer tweezers to pick up 3” or 4” Silicon wafers.
Serrated grips.
500ASA
130 mm 16 mm
8 mm
22 g
4”- 5”, special stainless steel, anti-glare finish,
non-magnetic
Wafer tweezers with fingers to reduce the risk of damage.
For 4” and 5” wafers. Serrated grips.
600ASA
130 mm 19,5 mm 8 mm
23 g
6”, special stainless steel, anti-glare finish, non-magnetic
Wafer tweezers with fingers to reduce the risk of damage.
For 6” wafers. Serrated grips.
608ASA
130 mm 30 mm 8,5 mm
23 g
6”, special stainless steel, anti-glare finish, non-magnetic
Same as 600ASA but with 30 mm width.
600JSA
130 mm 20 mm
8 mm
24 g
4”- 6”, special stainless steel, anti-glare finish,
non-magnetic
Wafer tweezers with free-floating PTFE, paddle for self adjustment on 4”- 6” wafers. Serrated grips.
140SA
120 mm 30 mm
5 mm
20 g
4” - 5”, special stainless steel/Polyester, anti-glare finish,
non-magnetic
Wafer tweezers with Delrin tips. Available with adjustable opening
screw. For 4” to 5” wafers. Serrated grips. Temperature resistance
170°C.
141SAP
150 mm 30 mm
8 mm
30 g
5”- 6”, special stainless steel/PTFE,, anti-glare finish,
non-magnetic
Wafer tweezers with Polyester tips. The perfect wafer tweezers.
Will not damage Si, GaAs or Ti wafers. Serrated grips.
141SAPH 150 mm 30 mm
8 mm
30 g
5”- 6”, special stainless steel/Halar, anti-glare finish,
non-magnetic
Same as 141SAP but with Halar coating and plastic tips without
pigmentation. Halar is acids resistant.
14
CUTTING, STRIPPING TWEEZERS
Cutting Tweezers
Cutting Tweezers
Main application:
e.g. for cutting soft wires
on micro electronics circuits,
very precise.
Model
15AGS
Length
115 mm
Weight
21 g
Description
Anti-glare finish
Cutting tweezers with fine oblique head and induction hardened
cutting blades for increasing life time. For soft wires up to Ø 0,25 mm.
15AGW
115 mm
26 g
Anti-glare finish
Cutting tweezers with oblique head. Induction hardened cutting blades
improves cutting capability and life time. For soft wires up to Ø 0,25 mm.
Stripping Tweezers
Stripping Tweezers
Main application:
for stripping small wires,
standard or PTFE, insultations, very precise.
Model
29Y
Length
120 mm
Weight
22 g
Description
Stainless steel, anti-glare finish
Miniature stripping tweezers. Serrated grips. Will strip tiny
wires between AWG 42 and 32 (0,06 to 0,20 mm).
Wire samples required.
29W30
120 mm
28 g
Stainless steel/fibre handles, anti-glare finish,
reverse action
Stripping tweezers with fibre-grip handles. For standard or PTFE,
wires between AWG 30 and 28 (0,25 mm – 0,3 mm).
Reverse action.
15
EXTRACTION TWEEZERS
Extraction Tweezers
= Outside Ø
Extraction Tweezers
Main application:
to extract connected wires
from the rear of the
connectors.
= Inside Ø
Model Length Ø A Ø B
024C
028
16
C
Weight
120 mm 1,75 2,15
mm mm
8 mm
20 g
120 mm 1,9 2,15
mm mm
8 mm
Description
Stainless steel
Extraction tweezers for Sub-D types. For ITT-Canon / TRW CET
20D, Honda connectors, Siemens, Philips, Souriau-Framatome, etc.
20 g
Stainless steel
Same as 024C but with thinner nozzle wall for wires with larger
insulations.
CUTTERS AND PLIERS
Cutters and Pliers
Erem Cutters and Pliers
rem cutters and pliers are unique in the degree of quality, precision, reliability, ergonomy and long life they
offer when compared to other professional tools, for the
following reasons:
E
The Steel
Erem cutters and pliers are not forged. They are manufactured from billets of
high grade tool steel, which uses a Swiss developed lamination technique.
It employs a multiple extrusion process to super compact the steel imparting additional strength and toughness to the tools. This results in reliable and
long lasting tools.
The Joints
The surfaces between the two halves of the joint are machine finished and in
conjunction with the interlocking precision screw that is used to join both halves
together ensure wobble free operation and eliminates blade overlap which
could cause mechanical shock and damage components.
The Springs
The return springs are mounted internally in the head of the tools and are guaranteed for 1 million operations. They operate with a constant resistance over
the movement of handles to reduce operator fatigue making them superior to
leaf or coil springs.
EMOS
Erem Maximum Opening Stop, limits the handle spread by preventing the tips of the
blades from opening more than 5mm. To promote operator comfort and ergonomy.
17
CUTTERS AND PLIERS
Cutters and Pliers
Customer Service
1. Spare parts
Erem pliers and cutters and their spare parts are guaranteed against manufacturing
defects. The following parts will be supplied free of charge should a defect be found
- Foam grips
- Springs
- Opening stops
Please contact your local Cooper Hand Tools office for advice on procedure.
2. Resharpening
Erem cutters can be returned to Erem Switzerland for free of charge resharpening.
It is possible to resharpen tools up to three times depending on their condition.
Tools will be returned to you fitted with new handles depending on their shape.
You will be invoiced for transport costs only.
Specials
Erem is able to offer tools for special applications without minimum order quantity.
Dimensioned drawings /and or samples of your application will be required.
Ergonomic Handles
Erem Cutters and Pliers with Ergonomic Handles
The Work Related Upper Limb Disorder (WRULD) is a muscular skeletal problem related
to the arm. WRULDS can be caused by positional fatigue or nerve damage caused e.g. by
repetitve use of non ergonomic hand tools, the socalled Repetitive Strain Injuries (RSI).
The ability to grip and hold objects can be impaired. Repetitive movements can cause
compression of the median nerve and produce sensations of pins and needles.
MEDIAN
NERVE
MUSCLES AT
MEDIAN NERVE
BASE OF THUMB
TENDONS
CARPAL BONES
CARPAL TUNNEL
WRULDS is a direct result of companies manufacturing processes and working practices
and will as result detrimental to the quality of a companies products. Therefore a reduction of the factors which cause WRULDS will improve working practice and product quality. In fact it is arguable that without quality working practice there can be no quality
product.
To alleviate the problem of RSI and Erem have designed a range of tools with ergonomic
handles.The compound curves of the handles of the Erem ergonomic cutters and pliers
allow the pressure applied to the handles when cutting or gripping to be evenly spread
over the palm of the hand. The thumb and fingers are self- positioned by the handles,
making the tool comfortable for the operator to use and reducing the incidence of
WRULDS.The comfortable foam grips are ESD safe and easily interchangeable.
The following tools are available with ergonomic handles:
- Side Cutters see page 27 – 28
- Tip Cutters see page 33
- Pliers see page 39
18
CUTTERS AND PLIERS
Cutters and Pliers
ESD Safety
The foam cushion grips are static dissipative and are fitted a standard to all models.
conductive
10∞
static dissip.
100
antistatic
105
EMI/RF
Sources:DOD/CECC
insulating
1012
1020 Ω/cm2
Erem-Cutters + Pliers
Cost Per Cut Comparison
The best way to compare the real costs between different hand tools is to consider the
number of cuts - besides the work itself and the performance.The parameters below
indicate how Erem tools - representing a higher initial investment - become even more
economical than lower quality cutters on a medium or long-term basis.
A = Low-end tools
B = Medium Quality
C = Erem
Price
100
1,2 = average stages of Erem cutters
needing resharping.
90
80
70
60
50
40
30
C
20
B
2
1
No. of cuts/1.000
10
A
25
50
75
100
125
150
175
200
225
250
275
300
325
19
CUTTING CAPABILITIES
Cutting Capabilities
Side Cutters*
Model
max. Cu (Copper)
mm
ø 0,1-0,6
ø 0,6-1,2
Cut*
SF
F
FF
ø >1,2
147A
x
511E
512E
512N
521E
522E
522N
532N
576EZ
577E
592E
595E
597E
599E
x
x
x
611E
612E
612N
622N
622NA
622NB
632N
676E
677E
x
x
x
x
x
x
x
x
x
x
x
Tip
Cutters*
Model
max. Cu (Copper)
mm
ø 0,1-0,6
ø 0,6-1,2
ø >1,2
503E
504AE
555E
570E
572E
573E
575E
582E
582EW
x
x
x
x
x
x
x
x
x
670E
x
1503N
x
x
2282E
x
x
x
x
x
x
x
x
x
x
812N
822N
884E
886E
896E
x
1512N
1522N
1522NA
1522NB
x
2212E
2222E
2222EA
2222EB
2232E
x
x
x
x
x
= Semi Flush
x
x
x
= Flush
x
x
x
= Erem Super Full Flush
x
Description see page 21
20
F
x
710E
776E
792E
*Note:
Cut*
SF
There is no max. Cu indication for Tungsten Carbide cutters. Please ask for the
according cutting capabilities.
SIDE CUTTERS
Side Cutters
Side Cutters
Erem offers a wide range of precision side cutters.
To establish which cutter is correct for your application
follow the steps below
Head Form
Oval Head
The most common head shape. For standard cutting applications where access is not the
problem.
Tapered Head
For cutting tasks where easier access is required. The tapered head shape allows better
tip access than the oval head but without much reducing the cutting capability.
Relieved Head
For cutting in confined areas. This is the smallest head shape available. One side is cut
away for access even in confined areas. Due to the cut away the cutting capability is
reduced. Flush tip cutting.
Cut
Semi Flush
These blades allow a very high resistance. Will cut from tip to heel, malleable wires like
Copper as well as hard wires. Leaves a pinch at the end of the wire. For all applications
where the cutting type is not so important.
Flush
Allows a flat cut with the same cutting capacities. The edge
of the wire is cut off flat. Thanks to faster penetration into
the component the operator’s effort is substantially reduced. No solder spikes after using wave soldering process.
Super Full Flush
An Erem exclusivity. This absolute full flush cut leaves a
perfect flat surface on cut leads It prevents any pinching
of leads. Flat, clean cut. No cutting rework after soldering.
Soft wires only.
1
1. Erem Cut
2
2. Others
Size
110 mm Small short head for increased cutting resistance.
For almost all cutting applications.
115 mm Longer and finer head.
For cutting applications where easy access is more important than a high cutting capacity.
120 mm Strong version.
For all cutting applications where high cutting capacity is required.
Safety Lead Device
Cutting safety device, holds wire scraps.
Can be adapted on all side cutters series 500, 600 and 2200.
Add “W” when ordering, e.g. 595EW
21
SIDE CUTTERS
Oval Head
Oval Head
Main application:
standard cutting applications.
Length 110 mm
Model
L
A
B
C
612N
110 mm
9 mm
9 mm
6 mm
Max. Cu
Description
Weight
ø 1,25 mm
48 g
Description
Semi flush cut, high grade tool steel,
burnished, ESD safe, resharpenable
Miniature side cutter.
Economical line. Small head.
611E
110 mm
9 mm
9 mm
6 mm
ø 1,5 mm
48 g
Semi flush cut, high grade tool steel,
burnished, ESD safe, resharpenable
Miniature side cutter. Small head.
612E
110 mm
10,5 mm
9 mm
6 mm
ø 1,5 mm
48 g
Semi flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Miniature side cutter. Standard head width.
622N
110 mm
9 mm
9 mm
6 mm
ø 1,25 mm
48 g
Flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Miniature side cutter. Economical line. Small head.
632N
110 mm
9 mm
9 mm
6 mm
ø 1,25 mm
48 g
Super full flush cut, high grade tool steel, antiglare finish, ESD safe, resharpenable
Miniature side cutter. Economical line. Small head.
Perfect full flush cut. Soft wires only.
710E
110 mm
8,8 mm
9 mm
6 mm
ø 1,0 mm
48 g
Super full flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Miniature side cutter. Standard head width.
Perfect full flush cut. Soft wires only.
Length 115 mm
Model
L
A
B
C
Max. Cu
Weight
512N
115 mm
10 mm
10,5 mm
6,5 mm
ø 1,6 mm
67 g
Description
Semi flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Side cutter for universal use. Medium size.
Economical line.
22
SIDE CUTTERS
Oval Head
Model
511E
L
115 mm
A
10 mm
B
10,5 mm
C
6,5 mm
Max. Cu Weight
ø 1,6 mm
67 g
Description
Semi flush cut, high grade tool steel,
burnished, ESD safe, resharpenable
Side cutter for universal use. Medium size.
512E
115 mm
12 mm
10,5 mm
6,5 mm
ø 1,6 mm
67 g
Semi flush cut, high grade tool steel,
burnished, ESD safe, resharpenable
Side cutter for universal use. Medium size. For tough
cutting applications.
597E
115 mm
12 mm
10,5 mm
6,5 mm
ø 1,6 mm
67 g
Semi flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Side cutter with strong head. For soft and small hard wires.
599T
599TFO
521E
115 mm 11,5 mm
115 mm
115 mm
15 mm
10 mm
10,5 mm
10,5 mm
10,5 mm
6,5 mm
6,5 mm
6,5 mm
ask for
cutting
capability*
67 g
ask for
cutting
capability*
67 g
ø 1,2 mm
67 g
Semi flush cut, Tungsten Carbide blades,
anti-glare finish, ESD safe
Side cutter with Tungsten Carbide blades for constant quality
cuts. Resistant to small stainless steel wires.
Semi flush cut, Tungsten Carbide blades,
anti-glare finish, ESD safe
Side cutter with Tungsten Carbide blades. For cutting Vectran
braided wires, fibre optics, Kevlar and small stainless steel
braids. Ask for special application.
Flush cut, high grade tool steel, polished head,
ESD safe, resharpenable
Side cutter for universal use. Medium size.
522N
115 mm
10 mm
10,5 mm
6,5 mm
ø 1,6 mm
67 g
Flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Side cutter for universal use. Medium size. Economical line.
522E
115 mm
12 mm
10,5 mm
6,5 mm
ø 1,2 mm
67 g
Flush cut, high grade tool steel, polished head,
ESD safe, resharpenable
Side cutter for universal use.
599E
115 mm
12 mm
10,5 mm
6,5 mm
ø 1,6 mm
67 g
Flush cut, high grade tool steel,
anti-glare finish, ESD safe
Side cutter with robust head.
599TF
532N
115 mm 11,5 mm
115 mm
10 mm
10,5 mm
10,5 mm
6,5 mm
6,5 mm
ask for
cutting
capability*
67 g
ø 1,6 mm
67 g
Flush cut, Tungsten Carbide blades,
anti-glare finish, ESD safe
Side cutter with Tungsten Carbide blades for constant quality
cuts. Resistant to small stainless steel wires.
Super full flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Side cutter for universal use. Medium size.
Economical line. Perfect full flush cut. Soft wires only.
* Please provide wire sample.
23
SIDE CUTTERS
Oval Head
Length 120 mm
Model
L
A
B
C
Max. Cu
Weight
812N
120 mm
15 mm
13,5 mm
7,5 mm
ø 1,8 mm
85 g
Description
Semi flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Side cutter for large wires. Economical line.
896E
120 mm
15 mm
13,5 mm
7,5 mm
ø 1,8 mm
85 g
Semi flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Side cutter for hard leads, Kovar wires, connector pins, etc.
822N
120 mm
15 mm
13,5 mm
7,5 mm
ø 1,8 mm
85 g
Flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Side cutter for large wires. Economical line.
Tapered Head
Tapered Head
Main application:
cutting applications where
easy access is required.
Length 110 mm
Model
622NA
L
110 mm
A
9 mm
B
9 mm
C
6 mm
Max. Cu Weight
ø 1,0 mm
48 g
Description
Flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Miniature side cutter. Small tapered head allows very
good access. Economical line.
677E
110 mm
9 mm
9 mm
6 mm
ø 1,0 mm
48 g
Flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Miniature side cutter. Small tapered head allows very
good access.
Length 115 mm
Model
595T
L
A
B
C
Max. Cu
Weight
115 mm
12 mm
10,5 mm
6,5 mm
ask for
cutting
capability*
67 g
* Please provide wire sample.
24
Description
Semi flush cut, Tungsten Carbide blades,
anti-glare finish, ESD safe
Side cutter with Tungsten Carbide blades for constant quality cuts.
Resistant to small stainless steel wires. Ask for special application.
SIDE CUTTERS
Tapered Head
Length 115 mm
Model
577E
L
A
B
C
Max. Cu
Weight
115 mm
9 mm
10,5 mm
6,5 mm
ø 1,2 mm
67 g
Description
Flush, high grade tool steel, anti-glare finish,
ESD safe, resharpenable
Side cutter for universal use. Medium size.
595E
115 mm
9 mm
10,5 mm
6,5 mm
ø 1,2 mm
67 g
Flush, high grade tool steel, anti-glare finish, ESD
safe, resharpenable
Side cutter for universal use. Medium size.
595TF
115 mm
12 mm
10,5 mm
6,5 mm
ask for
cutting
capability*
67 g
Flush cut, Tungsten Carbide blades, anti-glare finish,
ESD safe
Side cutter with Tungsten Carbide blades for constant quality
cuts. Resistant to small stainless steel wires.
* Please provide wire sample.
Length 120 mm
Model
886E
L
A
B
C
Max. Cu
Weight
120 mm
15 mm
13,5 mm
7,5 mm
ø 1,8 mm
83 g
Description
Flush, high grade tool steel, anti-glare finish,
ESD safe, resharpenable
Side cutter for large wires.
Relieved Head
Relieved Head
Main application:
cutting applications
in confined areas.
Length 110 mm
Model
L
A
B
C
Max. Cu
Weight
662NB
110 mm
9 mm
9 mm
6 mm
ø 0,8 mm
48 g
Description
Flush, high grade tool steel, anti-glare finish,
ESD safe, resharpenable
Miniature side cutter. Super fine relieved head allows
very good access. Economical line.
25
SIDE CUTTERS
Relieved Head
Length 110 mm
Model
L
A
B
C
Max. Cu
Weight
676E
110 mm
9 mm
9 mm
6 mm
ø 1,0 mm
48 g
Description
Flush cut, high grade tool steel, anti-glare finish,
ESD safe, resharpenable
Miniature side cutter. Super fine relieved head allows very
good access.
776E
110 mm
9 mm
9 mm
6 mm
ø 1,0 mm
48 g
Super full flush cut, high grade tool steel, anti-glare
finish, ESD safe, resharpenable
Miniature side cutter. Super fine relieved head allows very
good access. Soft wires only.
632NCF
110 mm
9 mm
9 mm
6 mm
ask for
cutting
capability*
48 g
Super full flush cut, high grade tool steel, anti-glare
finish, ESD safe, soft materials only
Miniature side cutter. Special fine, high precision cut exclusively designed for soft materials like small Silicone tubing in
medical applications, precision connector sealing, miniature
rubber gaskets or cutting of molded soft synthetic parts. Super
fine relieved head allows very good access.
* Please provide wire sample.
Length 115 mm
Model
576Z
L
115 mm
A
9 mm
B
10,5 mm
C
6,5 mm
Max. Cu Weight
ø 1,2 mm
67 g
Description
Flush cut, high grade tool steel, anti-glare finish,
ESD safe, resharpenable
Side cutter with fine relieved head. Medium size.
For fine wires.
592E
115 mm
12 mm
10,5 mm
6,5 mm
ø 0,6 mm
67 g
Flush cut, high grade tool steel, anti-glare finish,
ESD safe, resharpenable
Side cutter with relieved head. Medium size.
For Copper wires.
576TX
792E
115 mm
115 mm
11 mm
13 mm
10,5 mm
10,5 mm
6,5 mm
6,5 mm
ask for
cutting
capability*
67 g
ø 0,6 mm
67 g
Flush cut, Tungsten Carbide blades, anti-glare finish,
ESD safe
Miniature side cutter. Super fine relieved head allows very good
access. Tungsten Carbide blades for constant quality cuts. Resistant to small stainless steel wires.
Super full flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Side cutter with relieved head. Medium size.
For fine soft wires.
Length 120 mm
Model
884E
L
120 mm
A
15 mm
B
13,5 mm
C
7,5 mm
Max. Cu Weight
ø 1,8 mm
81 g
Description
Flush cut, high grade tool steel, anti-glare finish,
ESD safe, resharpenable
Side cutter for large wires.
26
SIDE CUTTERS
Specials
Specials
Model
147A
L
120 mm
A
12 mm
B
10,5 mm
C
7,5 mm
Max. Cu Weight
ø 2,0 mm 100 g
Description
Semi flush cut, high grade tool steel, anti-glare finish,
ESD safe, compound action
Compound action side cutter. Easy cutting for hard wires. 3,5
times less force needed than with conventional cutters. High cutting capacity: hard wires up to 0,5 mm, soft wires up to 2,0 mm.
Flush cut on request.
884EPCM
115 mm max.D 0,8 mm max.B 2,0 mm
-
79 g
Flush cut, high grade tool steel, anti-glare finish,
ESD safe, PCB separation
Side cutter for PCB separation only. New improved design for
higher blade resistance. No breakage guarantee.
Side Cutters with Ergonomic Handles*
Oval Head
Main applications:
Constant production cutting
applications.
Model
2212E
L
140 mm
A
10 mm
B
10 mm
C
5,8 mm
Max. Cu Weight
ø 1,25 mm 70 g
Description
Semi flush cut, high grade tool steel, anti-glare finish,
ESD safe, resharpenable, Ergonomic
Ergonomic side cutter for universal use.
2222E
140 mm
10 mm
10 mm
5,8 mm
ø 1,25 mm
70 g
Flush cut, high grade tool steel, anti-glare finish,
ESD safe, resharpenable, Ergonomic
Ergonomic side cutter for universal use.
2232E
140 mm
10 mm
10 mm
5,8 mm
ø 1,25 mm
70 g
Super full flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable, Ergonomic
Ergonomic side cutter for fine and soft wires.
*Ergonomic features see page 18
27
SIDE CUTTERS WITH ERGONOMIC HANDLES
Tapered Head
Tapered Head
Model
2222EA
L
140 mm
A
10 mm
B
10 mm
C
5,8 mm
Max. Cu Weight
ø 1,0 mm
70 g
Description
Flush, high grade tool steel, anti-glare finish,
ESD safe, resharpenable, Ergonomic
Ergonomic side cutter for universal use. Tapered head for
easier access.
Relieved Head
Relieved Head
Model
L
A
B
C
Max. Cu
Weight
2222EB
140 mm
10 mm
10 mm
5,8 mm
ø 0,8 mm
70 g
Description
Flush, high grade tool steel, anti-glare finish,
ESD safe, resharpenable, Ergonomic
Ergonomic side cutter for universal use. Relieved
head for working in confined areas.
28
TIP CUTTERS
Tip Cutters
Tip Cutters
Erem offers the largest variety of high precision tip cutters.
All edges are finely radiused to avoid board damaging.
To find the cutter for your demand just follow the steps
Erem Blade Protection
All tip cutters have an “anti-overbite”
system which prevents blades from
overlapping.
Head Form
Angled
For standard tip cutting applications.
Angled Narrow
For applications in confined areas. Longer but narrow head for
better reach between parts and into areas with limited access.
Straight
For vertical or horizontal tip cutting applications.
Cut
Semi Flush
These blades allow a very high resistance. Will cut
malleable wires like Copper as well as hard wires.
Leaves a pinch at the end of the wire.
Flush
Allow a flat cut with high cutting capacities. The edge of
the wire is cut off almost squarely. Guaranteed precision
even after constant usage. Thanks to faster penetration
into the component the operator’s effort is substantially
reduced.
1
1. Erem Cut
2
2. Others
Size
110 mm Small short head, for increased cutting resistance.
For almost all cutting applications.
115 mm Longer and finer head.
For cutting applications where easy access is more important than a high cutting capacity.
120 mm Strong version.
For all cutting applications where high cutting capacity
is required.
Safety Lead Device
Cutting safety device, holds wire scraps.
Can be adapted on 582E only.
Add “W” when ordering, e.g. 582EW.
29
TIP CUTTERS
Angled Head
Angled Head
Main application:
for standard tip cutting applications.
Length 110 mm
Model
503ET
503E
L
A
B
C
Max. Cu Weight
D
110 mm 12 mm 10,5 mm 6,5 mm 10 mm ask for
67 g
cutting
capability*
Description
110 mm 12 mm 10,5 mm 6,5 mm 10 mm ø 1,2 mm
<) 30°, flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
67 g
<) 30°, semi flush cut, Tungsten Carbide,
anti-glare finish, ESD safe
Tip cutter. Standard size. Tungsten Carbide blades for constant quality cuts even on hard wires.
Tip cutter. Standard size. For universal use.
504AE
110 mm 13 mm 10,5 mm 6,5 mm 10 mm ø 1,2 mm
67 g
<) 30°, flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Tip cutter. Standard size. Rounded head. For universal use.
503ETF
110 mm 12 mm 10,5 mm 6,5 mm 10 mm
67 g
ask for
cutting
capability*
<) 30°, flush cut, Tungsten Carbide blades,
anti-glare finish, ESD safe
Tip cutter. Standard size. Tungsten Carbide blades for constant quality cuts even on hard wires.
* Please provide wire sample.
Angled Head Small
Angled Head Small
Main applications:
for applications in confined areas.
Length 110 mm
Model
575E
L
A
B
C
D
Max. Cu
110 mm 15 mm 10,5 mm 6,5 mm 10 mm ø 0,6 mm
Weight
67 g
Description
<) 45°, flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Tip cutter. Small size. For delicate work on hybrid circuits or
micro modules.
30
TIP CUTTERS
Angled Head Small
Length 115 mm
Model
572E
L
A
B
C
Max. Cu Weight
D
115 mm 18 mm 10,5 mm 6,5 mm 6,5 mm ø 0,6 mm 68 g
Description
<) 40°, flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Tip cutter. Medium size. Relieved jaws for easier access.
593AE
115 mm 20 mm 10,5 mm 6,5 mm
4 mm
ø 1,0 mm
68 g
<) 50°, flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Tip cutter. Cuts easily DIL leads from the rear. Cuts pins on
dense PCB. Ideal maintenance tool.
582E
115 mm 19 mm 10,5 mm 6,5 mm
7 mm
ø 1,0 mm
68 g
<) 45°, flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Tip cutter medium size. A must when working on PCB’s,
cutting component leads. Also ideal for rework.
582EW
115 mm 19 mm 10,5 mm 6,5 mm
7 mm
ø 1,0 mm
70 g
<) 45°, flush cut, high grade tool steel, anti-glare
finish, ESD safe, resharpenable, retention clip
Same as 582E but with retention clip, holds wire scraps
after cutting.
Length 120 mm
Model
555E
L
A
B
C
120 mm 21 mm 10,5 mm 6 mm
Max. Cu Weight
D
6,5 mm ø 1,2 mm 68 g
Description
<) 40°, flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Tip cutter. Strong version.
31
TIP CUTTERS
Straight Tapered Head
Straight Tapered Head
Main applications:
for horizontal use and easier access.
Length 110 mm
Model
670E
L
A
B
110 mm 10,5mm 9 mm
C
D
6 mm
3 mm
Max. Cu Weight
ø 0,6 mm
48 g
Description
Horizontal, flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Miniature tip cutter. For cutting small wires in dense
working areas. Vertical SMD cutter.
670EP
110 mm 10 mm
9 mm
6 mm
2 mm ø 0,25 mm 48 g
Vertical tip cutter, flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Miniature tip cutter. High precision SMD lead cutting.
Micro-packages up to 0,25 fine pitches before desoldering.
No breakage guarantee.
For µ-pitches under 0,5 mm use 670 EPF
Length 120 mm
Model
570E
L
A
120 mm 22 mm
B
C
D
Max. Cu
Weight
9 mm
6,5 mm
4 mm
ø 0,6 mm
67 g
Description
Flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Tip cutter for horizontal or vertical tip cutting.
For cutting at extreme tips.
32
TIP CUTTERS
Straight Head
Straight Head
Main applications:
for vertical use
Model
573E
L
A
120 mm 23 mm
B
9 mm
C
D
Max. Cu
6,5 mm 3,5 mm ø 0,8 mm
Weight
67 g
Description
Vertical, flush cut, high grade tool steel,
anti-glare finish, ESD safe, resharpenable
Tip cutter for vertical tip cutting. For fine wires.
Tip Cutters with Ergonomic Handles*
Angled Head Small
Model
2282E
L
A
B
C
140 mm 20 mm 10 mm 5,8 mm
D
Max. Cu
7 mm
ø 1,0 mm
Weight
70 g
Description
<) 45°, flush cut, high grade tool steel, anti-glare
finish, ESD safe, resharpenable, ergonomic
Ergonomic tip cutter. Medium size. Ideal for working on
PCB’s or cutting component leads.
*Ergonomic features see page 18
33
PNEUMATIC CUTTERS
Pneumatic Side Cutters and Tip Cutters
Pneumatic Side Cutters and Tip Cutters
The Erem 1500BSF is a small lightweight air tool that can
be fitted with a range of cutter heads making this tool
extremely versatile. It is suitable for the cropping of
conventional components, as well as small ductile or
plastic parts.
Housing
Model
1500BSF
D
L
28 mm
130 mm
Weight
130 g
(w.o. head)
Description
Manual air tool
Small precise pneumatic cutter housing. Improved lifetime and reliability.
Easy interchangeable cutting heads. Requires 4- 6 bar oil-free, clean
compressed air. New economical version.
Cutting Heads for 1500BSF
Side Cutters
Oval Head
Model
1512N
A
10 mm
B
C
Max. Cu Weight
10,5 mm 6,5 mm ø 1,6 mm 35 g
Description
Semi flush cut, high grade tool steel, anti-glare finish,
resharpenable
Side cutter for universal use. Medium size. Economical line.
Improved lifetime.
1522N
10 mm
10,5 mm 6,5 mm ø 1,6 mm
35 g
Flush cut, high grade tool steel, anti-glare finish,
resharpenable
Side cutter for universal use. Medium size. Economical line.
Improved lifetime.
34
PNEUMATIC SIDE CUTTERS AND TIP CUTTERS
Tapered Head
Tapered Head
Model
1522NA
A
B
C
Max. Cu
Weight
9 mm
10,5 mm
6,5 mm
ø 1,4 mm
35 g
Description
Flush cut, high grade tool steel, anti-glare finish,
resharpenable
Side cutter for easier access. Medium size. Economical line.
Improved lifetime.
Relieved Head
Model
1522NB
A
B
C
Max. Cu
Weight
9 mm
10,5 mm
6,5 mm
ø 1,2 mm
32 g
Description
Flush cut, high grade tool steel, anti-glare finish,
resharpenable
Side cutter for confined areas. Medium size. Economical line.
Improved lifetime.
Tip Cutters
Angled Head
Model
1503E
A
B
C
12 mm 10,5 mm 6,5 mm
D
Max. Cu Weight
9 mm ø 1,2 mm
38 g
Description
<) 30°, flush cut, high grade tool steel, anti-glare finish,
resharpenable
Tip cutter. Small size. For universal use.
Note: further head shapes available on request.
35
DISTANCE CUTTERS
Distance Cutters
Distance Cutters
Erem distance cutters are available with fixed or adjustable
cutting distance. The tips are brightly polished to avoid
board damage
E
D
B
C
The Erem protective stop
screw increases the performance of the tip cutters:
Clearance B larger than the diameter = cut wire is ejected
Clearance B smaller than the wire diameter = cut wire is held
Adjust the protective stop screw D to set blade C does not hit the opposite side.
This improves the Lifetime of the blade.
Fixed Cutting Height
Model
530E
L
A
E
F
Max. Cu Weight Description
120 mm 20 mm 3 mm 1,5 mm ø 1,0 mm 67 g
Flush cut, high grade tool steel, polished tips, ESD safe
(Standard)
Distance cutter. Cuts the lead to a predetermined length of 1,5 mm.
Length from 0,5 mm to 2,5 mm on request, see price list. Reduces
mechanical shock on components. With adjustable screw for possible wire holding.
549E
500-108
115 mm 20 mm 3 mm 1,5 mm ø 1,0 mm
blade (Standard)
4,5 mm
67 g
120 mm 20 mm 3 mm 1,5 mm ø 0,8 mm
67 g
45°, flush cut, high grade tool steel, polished tips, ESD safe
Distance cutter. Cuts the lead to a predetermined length of 1,5 mm.
Lenght from 0,5 mm to 2,5 mm on request, see price list. Reduces
mechanical shock on components.
Flush cut, high grade tool steel, polished tips, ESD safe
Distance cutter. Cuts the lead to a predetermined length of 1,5 mm.
Reduces mechanical shock on components.
530S
110 mm 10 mm
4 mm 1,5 mm ø 1,0 mm
65 g
(Standard)
30°, flush cut, high grade tool steel, polished tips,
ESD safe
Distance cutter. Cuts and flattens leads to prevent component from
fallen off the circuit board. Predetermined length of 1,5 mm.
Length from 0,5 mm to 2,5 mm on request.
Adjustable Cutting Height
Model
530E15A
L
A
E
F
Max. Cu Weight Description
120 mm 20 mm 4,5 mm 1,2 - 6 ø 1,2 mm 70 g
Flush cut, high grade tool steel, polished tips, ESD safe
mm
Distance cutter with adjustable cutting length from 1,2 mm to 6 mm
with setting screw.
573EB
115 mm 23 mm 3,5 mm 0-5 mm ø 0,8 mm
70 g
Flush cut, Plastic anvil. High grade tool steel, polished tips,
ESD safe
Distance cutter with adjustable cutting length from 0 mm to 5 mm
with setting screw. Replaceable synthetic stop, no risk of board
damage.
36
PLIERS
Pliers
Pliers
Erem offer a range of pliers with
standard and ergonomic handles.
Round Nose
Model
543E
L
A
120 mm 23 mm
B
9 mm
C
Eø
G
6,5 mm 0,8 mm 1,6 mm
Weight
67 g
Description
High grade tool steel, anti-glare finish, ESD safe
Round nose pliers with smooth jaws, very precise.
Needle Nose
Model
547
L
A
120 mm 23 mm
B
9 mm
C
E
G
6,5 mm 0,9 mm 1,2 mm
Weight
67 g
Description
High grade tool steel, anti-glare finish, ESD safe
Needle nose pliers with smooth jaws, very precise.
Flat Nose
Model
542E
L
A
120 mm 23 mm
B
9 mm
E
C
G
Weight
6,5 mm 2,4 mm 1,4 mm 67 g
Description
High grade tool steel, anti-glare finish, ESD safe
Flat nose pliers with smooth jaws.
531E
125 mm 23 mm
9 mm
6,5 mm
5 mm
3 mm
67 g
High grade tool steel/Nylon, anti-glare finish,
ESD safe
Flat nose pliers with replaceable Nylon inserts to prevent
nicking e.g. for straightening precious metal, leads, etc.
37
PLIERS
Pliers
Chain Nose
Model
544E
L
A
120 mm 23 mm
B
C
E
G
Weight
9 mm
6,5 mm
1 mm
1,4 mm
67 g
Description
High grade tool steel, anti-glare finish, ESD safe
Chain nose pliers with smooth jaws.
544D
125 mm 23 mm
9 mm
6,5 mm
1 mm
1,4 mm
67 g
High grade tool steel, anti-glare finish, ESD safe
Chain nose pliers with smooth jaws, inside serrated.
546E
125 mm 24 mm
9 mm
6,5 mm 0,8 mm 0,8 mm
67 g
<) 60°, high grade tool steel, anti-glare finish,
ESD safe
Chain nose pliers bent with smooth jaws.
D = 6,0 mm
38
PLIERS
Pliers with Ergonomic Handles*
Needle Nose
Model
2211P
L
A
165 mm 35 mm
B
C
10 mm 5,8 mm
E
G
Weight
1 mm
1,2 mm
80 g
Description
High grade tool steel, anti-glare finish, ESD safe,
Ergonomic
Ergonomic needle nose pliers with smooth jaws.
Flat Nose
Model
2242E
L
A
160 mm 33 mm
B
C
E
G
Weight
10 mm 5,8 mm 3,5 mm 1,5 mm 80 g
Description
High grade tool steel, anti-glare finish, ESD safe,
Ergonomic
Ergonomic flat nose pliers with long smooth jaws.
Precise radiused edges.
*Ergonomic features see page 18
39
EROP CUTTERS AND PLIERS
EROP Cutters and Pliers
EROP Cutters and Pliers
The newly introduced EROP range from Erem offers a
variety of side cutters and pliers at a budget price. The
tools are manufactured from high quality tool steel have
a box joint construction, burnished heads, robust opening
leaf springs and replaceable soft ESD safe grips.
Side Cutters
Model
EROP355
L
110 mm
A
11 mm
B
9,5 mm
C
7,5 mm
Max. Cu Weight
ø 1,0 mm
61 g
Description
Semi flush cut, high quality tool steel, burnished,
ESD safe
Side cutter, tapered head, slim-line. Fine cutting edges for
fine work.
EROP155
110 mm
13,5 mm
11 mm
7,5 mm
ø 1,0 mm
72 g
Semi flush cut, high quality tool steel, burnished,
ESD safe
Side cutter, round head. For assembly work on circuit boards,
telephone and radio work.
EROP419
130 mm
18 mm
11 mm
8 mm
ø 2,0 mm
- g
110
Semi flush cut, high quality tool steel, burnished,
ESD safe
Side cutter robust. Round head. For general use.
EROP357
110 mm
11 mm
9,5 -mm
7,5 mm
ø 0,6 mm
61 g
Semi flush cut, high quality tool steel, burnished,
ESD safe
Side cutter, tapered head, slim-line. Fine cutting edges for
cutting thin wires and cutting tiny components.
Tip Cutters
Model
EROP331
L
120 mm
A
12 mm
B
12 mm
D
7,5 mm
Max. Cu Weight
ø 1,5 mm
81 g
Description
<) 40°, flush cut, high quality tool steel, burnished,
ESD safe
Tip cutter bent, slim. Ideal for fine works. Exact guidance of
cutting edges.
40
EROP CUTTERS AND PLIERS
EROP Cutters
Model
EROP330
L
130 mm
A
7,5 mm
B
7,5 mm
D
Max. Cu Weight
5,0 mm ø 1,0 mm 84 g
Description
<) 40°, flush cut, high quality tool steel, burnished,
ESD safe
Tip cutter bent. For PCB applications.
EROP Pliers
Round Nose
Model
EROP172
L
A
B
125 mm 22,5 mm 9,5 mm
C
6 mm
Eø
G
Weight
0,8 mm 1,6 mm 63 g
Description
High quality tool steel, burnished, ESD safe
Round nose pliers. Smooth polished inside jaws for bending fine loops.
Needle Nose
Model
EROP174
L
A
B
C
E
120 mm 22,5 mm 9,5 mm 6,5 mm 1,5 mm
G
2 mm
Weight
66 g
Description
High quality tool steel, burnished, ESD safe
Needle nose pliers. Smooth polished inside jaws for
gripping fine parts and forming wire.
EROP277
140 mm 39 mm 12 mm 7,5 mm 1,2 mm 1,8 mm
90 g
High quality tool steel, burnished, ESD safe
Needle nose pliers. Serrated, for gripping, holding and
forming wires and parts.
EROP280
170 mm 64 mm 13,5 mm 8 mm
1,8 mm
2 mm
113 g
High quality tool steel, burnished, ESD safe
Needle nose pliers long. Oval pointed. Serrated.
Robust but fine tips for work in confined areas.
41
STRIPPING TOOLS
EROP Pliers
Flat Nose
Model
EROP170
L
A
B
120 mm 22,5 mm 9,5 mm
C
6 mm
E
3 mm
G
1,2 mm
Weight
63 g
Description
High quality tool steel, burnished, ESD safe
Flat nose pliers. Slim smooth jaws for delicate work.
EROP171
120 mm 22,5 mm 9,5 mm
6 mm
4 mm
1,2 mm
67 g
High quality tool steel, burnished, ESD safe
Flat nose pliers. Slim smooth jaws for delicate work.
With larger gripping area.
Stripping Tools
High Precision Stripping Tools
Erem stripping tools are the most precise tools used in the
electronic or aviation field. They are manufactured from
high grade tool steel to ensure durability. To ensure that
you have the correct tool for your application, send us
samples of your wire and we will make recommendations.
Front Stripping
Model
510AE
42
L
A
120 mm 21 mm
E
G
H
Wire ø
Weight
5 mm
4 mm
7 mm
0,25 1,02 mm
(AWG
30 - 18)
75 g
Description
High grade tool steel, anti-glare finish, ESD safe
Front stripping tool. Adjustable for different diameters.
Diameter adjustable with screw. With interchangeable side
cutting blade. For all kind of insulation and fibre optic outer
jackets.
STRIPPING TOOLS
Stripping Tools
Model
552E
L
120
mm
A
23
mm
E
6,5
mm
F
1
mm
G
11
mm
H
9
mm
Wire ø Weight
0,06 - 80 g
0,25
mm
(AWG
42-30)
Description
Wire ø Weight
Description
0,06 0,25
mm
(AWG
42-30)
80 g
High grade tool steel, anti-glare finish, ESD safe,
high precision
0,25
mm
(AWG
30)
67 g
High grade tool steel, anti-glare finish, ESD safe,
high precision
Front stripping tool. Unique high precision tool. Strips one
size at a time without scratching the cores. For all kind of
insulation,PTFE,, Tefzel, fibre optics or stranded wires.
Diameter adjustable with screw plus stop screw.
Replaceable cutting blades. Supplied with screwdriver
and hex key.
Side Stripping
Model
552S
502E30
L
A
E
F
G
H
120
mm
21
mm
6,5
mm
6,7
mm
11
mm
9
mm
120
mm
22
mm
3
mm
6,3
mm
2,4
mm
5
mm
Side stripping tool. Unique high precision tool. Strips one
size at a time without scratching the cores. For all kind of
insulation,PTFE,, Tefzel, fibre optics or stranded wires.
Diameter adjustable with screw plus screw stop.
Replaceable cutting blades. Supplied with screwdriver
and hex key.
High grade tool steel, anti-glare finish, ESD safe
Combination side stripping tool. Fine replaceable cutting
blades. Strips resistant insulations such as PTFE,, Tefzel,
glass reinforced Fluoropolymere. This tool combines stripping, cutting and bending/gripping. For one specific wire
diameter, AWG 30 (0,25 mm). Other diameters on request.
Special Stripping
Model
520E
L
A
D
Wire ø
Weight
120
mm
10
mm
11
mm
0,25 - 1,3 mm
(AWG 30-16)
75 g
Description
High grade tool steel, anti-glare finish, ESD safe,
high precision
Strips one or several wires simultaneously.
Particularly designed for mini or standard wire-wrapping
work. Diameter adjustable with screw plus blocking nut.
A
D
43
PRE-FORMING TOOLS
Pre-Forming Tools
Pre-Forming Tools
Erem offers preforming tools for active and
passive components.
For Passive Components
Model
554E
L
A
D
E
F
Weight
120 mm
13 mm
10 mm
10 mm
10 mm
70 g
Description
High grade tool steel, anti-glare finish, ESD safe
Bending pliers for component leads, etc. U-shape.
Max. lead ø:
Diodes: 0,65 mm
Capacitors: 0,7 mm
Resistors: 1/2 W
554A
120 mm
23 mm
5,6 mm
4 mm
4,5 mm
70 g
High grade tool steel, anti-glare finish, ESD safe
Bending pliers for component leads, etc. U-shape.
Axial forming action.
Max. lead ø:
Diodes: 0,65 mm
Capacitors: 0,7 mm
Resistors: 1/2 W
554B
120 mm
23 mm
5,6 mm
2,5 mm
4,5 mm
70 g
High grade tool steel, anti-glare finish, ESD safe
Bending pliers with tapered nose. For component leads, etc.
U-shape. Axial forming action.
Max. lead ø:
Diodes: 0,65 mm
Capacitors: 0,7 mm
Resistors: 1/2 W
44
PRE-FORMING TOOLS
Pre-Forming Tools
Model
554TX
L
120 mm
A
20 mm
D
6,5 mm
E
6,5 mm
F
4 mm
Weight
70 g
Description
High grade tool steel, anti-glare finish, ESD safe
Bending pliers for forming stress reliefs. One lead left,
one lead right in one single operation. For stable insertion.
Max. lead ø:
Diodes: 0,65 mm
Capacitors: 0,7 mm
Resistors: 1/2 W
50788
120 mm
23 mm
-
4 mm
3 mm
67 g
High grade tool steel, anti-glare finish, ESD safe,
cut + bend
Bending pliers. Cuts and bends leads of popular radial
components to a specific length.
Max. lead ø:
Diodes: 0,65 mm
Capacitors: 0,7 mm
Resistors: 1/2 W
50789Z
120 mm
23 mm
3,3 mm
3,5 mm
-
67 g
High grade tool steel, anti-glare finish, ESD safe,
cut + bend
Bending pliers. Cuts and bends leads of various types of
components.
Max. lead ø:
Diodes: 0,65 mm
Capacitors: 0,7 mm
Resistors: 1/2 W
45
PRE-FORMING TOOLS
Pre-Forming Tools
Pre-Forming Tools for Active Components
For Active Components
Model
500103A
500210E
500104A
500104AI
L
120 mm
120 mm
120 mm
120 mm
K
max.
15 mm
M
3-12 mm
I
-
max.
11 mm
3,8-15 mm
max.
13 mm
3,5-15 mm 2,54 mm
max.
13 mm
3,5-15 mm 2,54 mm
Weight
85 g
Description
High grade tool steel, anti-glare finish, ESD safe
High precision preforming tool. Bends flat parts, contacts, power
transistors, triac leads, etc. to a right angle. Adjustable with screw.
-
85 g
High grade tool steel, anti-glare finish, ESD safe, cut + bend
High precision preforming tool. Improved version of 500103A. Cuts and
bends TO series, power transistor, LEDs, etc. simultaneously at 90°
without stressing the component. Simple adjustment (M) and replaceable cutting blade.
85 g
3 leads, high grade tool steel, anti-glare finish, ESD safe
High precision preforming tool for 3 leads. Bends TO 126, 218, 220,
power transistor leads, etc. at 90° in two rows. Adjustable (M) with
screw.
85 g
3 leads, high grade tool steel, anti-glare finish, ESD safe,
central lead backwards
High precision preforming tool for 3 leads. Bends TO 126, 218,
220, power transistor leads, etc. at 90° in two rows. Adjustable
(M) with screw. Central lead backwards.
46
PRE-FORMING TOOLS
Pre-Forming Tools
For Active Components
Model
500154A
500154AI
L
120 mm
120 mm
K
max.
13 mm
M
I
Weight
4,5-9,5 mm 2,54 mm
90 g
max.
13 mm
4,5-9,5 mm 2,54 mm
Description
5 leads, high grade tool steel, anti-glare finish, ESD safe
High precision preforming tool for 5 leads.. Bends TO 126, 218, 220,
power transistor leads, etc. at 90° in two rows. Adjustable (M) with
screw.
90 g
5 leads, high grade tool steel, anti-glare finish, ESD safe,
opposite leads backwards
High precision preforming tool for 5 leads.. Bends TO 126, 218, 220,
power transistor leads, etc. at 90° in two rows. Adjustable (M) with
screw. Opposite leads backwards.
For Flat Packs, Quads
Model
L
A
K
M
Weight
80013C
120 mm
17 mm
max.
13 mm
2,8 mm
100 g
Description
High grade tool steel, anti-glare finish, ESD safe
High precision preforming tool. For flat packs, quads, etc.
No friction effect. Designed after MIL specs. Cuts + bends.
For DIL / IC
Model
L
E
F
Weight
809IC
120 mm
25 mm
0,9 mm
98 g
Description
High grade tool steel, anti-glare finish, ESD safe
High precision preforming tool. Cuts and bends DIL pins to a 90° angle
in one operation. For up to 20 pin IC. Allows DIL-ICs to go SMT.
or
47
IC AND SMD TOOLS
IC and SMD Tools
IC and SMD Tools
Erem IC and SMD tools for inserting, extracting,
straightening and cutting of ICs and SMDs
Inserting and Extracting
Model
505
L
120 mm
Model
505C
505E
505A
505BGC
505BG
E
20 mm
27 mm
32 mm
36 mm
36 mm
Weight
-
Description
High grade tool steel, anti-glare finish, ESD safe
Inserting and extracting pliers. Available sizes see chart.
Adjustable with screw.
Insertion: squeeze IC pins.
Extraction: adjust jaws width so that pins stay in the middle of holes.
Pins:
Width:
Straightening
Model
508Z
L
125 mm
A
23 mm
E
20 mm
G
1 mm
Weight
85 g
Description
8 pins, high grade tool steel, anti-glare finish, ESD safe
Straightening pliers. For multiple DIL / IC leads. Before insertion or after
soldering. Laterally (a) or parallel (b). For up to 8 pins. Ideal maintenance tool.
(a)
808G
130 mm
23 mm
42 mm
(b)
1 mm
120 g
16 pins, high grade tool steel, anti-glare finish, ESD safe
Straightening pliers. For multiple DIL / IC leads. Before insertion or after
soldering. Laterally (a) or parallel (b). For up to 16 pins.
Ideal maintenance tool.
(a)
48
(b)
IC AND SMD TOOLS
IC and SMD Tools
Cutting
Model
670EP
L
110 mm
A
10 mm
D
3 mm
E
2 mm
Weight
48 g
Description
Flush, high grade tool steel, anti-glare finish, ESD safe,
resharpenable
High precision tip cutter. For cutting leads of SMD micro packages up to
0,25 mm or fine pitch components less than 1/20”. Cuts pins before heat
desoldering. Essential SMD tool. No breakage guarantee.
For µ-pitches below 0,5 mm model 670EPF is necessary. Please supply IC
together with order.
593AE
115 mm
20 mm
4 mm
-
67 g
Flush, high grade tool steel, anti-glare finish, ESD safe,
resharpenable
High precision tip cutter bent. For cutting DIL leads from the rear.
Ideal maintenance tool. Cuts pins before heat desoldering.
Trimming
Model
509E
L
A
D
E
F
Weight
120 mm
21 mm
3,5 mm
21,5 mm
1,5 mm
74 g
Description
8 pins, high grade tool steel, anti-glare finish,
ESD safe, trim
Trimming pliers. Trims an entire row of 8 pins to the same
length. The lead tips are cut flat. For multiple DIL / IC leads.
Before insertion or after soldering.
49
FIBRE OPTIC TOOLS
Fibre Optic Tools
Fibre Optic Tools
High precision tools for working on fibre optics.
Side Stripping
Model
552S
L
120
mm
A
21
mm
E
6,5
mm
F
6,7
mm
G
11
mm
H
9
mm
Wire ø Weight
0,06 - 80 g
0,25
mm
AWG
42 - 30
Description
High grade tool steel, anti-glare finish, ESD safe,
high precision
Side stripping tool. Unique high precision tool. Strips one
size at a time without scratching the cores. For all kind of
insulation,PTFE,, Tefzel, fibre optics or stranded wires.
Diameter adjustable with screw plus screw stop.
With replaceable cutting blade.
Supplied with screwdriver and hex key.
Fixed standard ø like 125 µ on request.
Cutting
Model
L
A
B
C
Weight
599FO
115 mm
11,5 mm
10,5 mm
6,5 mm
67 g
Description
A unique high precision cutter for Kevlar® silks
Cuts all silks even very close to fibre core.
Avoid any other application.
599TFO
115 mm
15 mm
10,5 mm
6,5 mm
67 g
Semi flush cut, Tungsten Carbide blades,
anti-glare finish, ESD safe
Side cutter with Tungsten Carbide blades. For cutting Vectran
braided wires, fibre optics, Kevlar and small stainless steel
braids. Ask for special application.
Holding / Gripping
Model
L
Weight
249SA
130 mm
20 g
Description
Special stainless steel / PPS, anti-glare finish,
non-magnetic, ESD safe, suitable for fibre optics
Precision tweezers with serrated grips and synthetic tips
(PPS). Heat resistant up to 250°C (480°F). Resistant to acids
and solder. Waterproof, ESD safe. Does not damage fibre
optic cores.
50
KITS
Kits
Kits
Erem kits offer a range of popular tweezers, cutters
and pliers in different combinations.
Kit for SMD Handling
L
3900KC
130 mm
Width
230 mm
Thickness
30 mm
Weight
350 g
Description
Black plastic case, cushioned, ESD safe, consists of:
Tweezers
51SA Precision tweezers 115 mm, bent 30° , relieved. Very fine tips.
Stainless steel, anti-glare finish, non-magnetic.
102ACA SMD tweezers 115 mm, with angled head and blunted edges to
avoid board damaging. For handling of small components. Special stainless
steel, anti-glare finish, non-magnetic.
103ACA SMD tweezers 115 mm, with angled head 45° and blunted edges
to avoid board damaging. For horizontal handling of small components.
Special stainless steel, anti-glare finish, non-magnetic.
150SAMB SMD tweezers 120 mm, bent 40°, serrated handles. For gripping
small cylindrical parts ø 1,2 - 2,5 mm, special stainless steel, anti-glare
finish, non-magnetic.
150SAMF SMD tweezers 120 mm, straight, serrated handles. For gripping
small cylindrical parts ø 1,2 – 2,5 mm, special stainless steel, anti-glare
finish, non-magnetic.
Model
Cutters
670EP High precision tip cutter 110 mm. For cutting leads of SMD micro
packages up to 0,25 mm or fine pitch components less than 1/20”.
Flush cut, high grade tool steel, anti-glare finish, ESD safe.
51
VACUUM MANIPULATOR
Vacuum Manipulator
Vacuum Manipulator
The Erem 3000 series offers a vacuum micro manipulation
system for precise handling of tiny components as well as
flat parts. For use in mechanical assembly, laboratories,
etc. The advantages are:
• easy pick up of components or silicon wafers
• immediate pick up and release of the parts
• full 360° rotating system
• direct axial air switch
• ergonomic shape reduces hand and wrist fatigue
• ESD safe
3200
2040Z / 2044Z / 2041Z
3000 ESD
2052E
3231
3303 / 3305Z /
3310Z / 3315 /
3330
3232
2040Z / 2044Z / 2041Z
3740
(optional)
2052E
Housing
Model
3000ESD
L
140 mm
Diameter
10 mm
Weight
35 g
Description
Housing
Housing with axial air switch, ergonomic shape, serrated grip area, ESD safe.
Professional device.
Inserts for Housing 3000ESD
Adapter
Model
3200
L
Weight
25 mm
15 g
Description
Adapter
360° rotating head for housing 3000ESD. With straight nozzle, stainless steel
for direct pick-up or as adapter for suction tips or suction cups.
3231
5 mm
5g
Adapter
Adapter fix. For use with suction tips series 3300.
3231
3232
52
15 mm
total
3g
Adapter
Can be used with or without tips, fix.
Holds either suction cup 2052E or tips 2040Z, 2041Z, 2044Z.
VACUUM MANIPULATOR
Vacuum Manipulator
Suction Tips Straight
Model
2040Z
Inside ø
Outside ø
0,70 mm
0,15 mm
Description
Suction tip straight,PTFE, tip
For use with rotating head 3200 or fix adapter 3232.
Model
2044Z
1,30 mm
0,90 mm
Suction tip straight, Polyethylene tip
For use with rotating head 3200 or fix adapter 3232.
2041Z
1,40 mm
2,0 mm
Suction tip straight, Polyethylene tip
For use with rotating head 3200 or fix adapter 3232.
Suction Needles
Model
3303
Outside ø
0,30 mm
Inside ø
Description
0,16 mm
Suction needle bent 45°, stainless steel
For use with fix adapter 3231.
3305Z
0,50 mm
0,25 mm
Suction needle bent 45°, stainless steel
For use with fix adapter 3231.
3310Z
0,65 mm
1,0 mm
Suction needle bent 45°, stainless steel
For use with fix adapter 3231.
3315
1,0 mm
1,5 mm
Suction needle bent 45°, stainless steel
For use with fix adapter 3231.
3330
2,5 mm
3,0 mm
Suction needle bent 45°, stainless steel
For use with fix adapter 3231.
Suction Cups
Model
Diameter ø
2052E
4,5 mm
Description
Suction cup, Silicone rubber
For use with rotating head 3200 or fix adapter 3232.
53
VACUUM MANIPULATOR
Wafer Handling
Wafer Handling
.
3503A
3000 WESD
3503B
Model
3000WESD
Size
140 mm (length)
Description
Pick-up device
Pick-up device for silicon wafers up to 8". ESD-safe.
Needs min. -600 mBar vacuum. For use with suction
plates 3503A or 3503B.
3503A
Insert for vertical pick-up for silicon
wafers up to 8"
For vertical pick up. Armite suction plate with
stainless steel tube, ESD safe.
30 mm
80 mm
20 mm
20 mm
Ø 2,5 mm
3503B
Insert for horizontal pick-up for silicon
wafers up to 8"
30 mm
73 mm
20 mm
Ø 2,5 mm
54
Stainless steel tubing bent for horizontal pick up.
Angles can be determined by customer, no price
surcharge. Armite suction plate with stainless steel
tube, ESD safe.
VACUUM MANIPULATOR
Accessories
Model
3714Z
Description
Pump
Membrane pump 230V, silent running, air volume 5 l/min, max. vacuum -250 mbar.
(not suitable for wafer pick up)
3008ESD
Tubing System
Tubing system flexible, 1,8 m, ESD safe.
3717
Filter
Filter for tubing system 3008ESD.
3740
Table Holder
Table holder for 3000ESD and 3000WESD housing (without accessory).
Vacuum Kit
Model
3000KCESD
Size
Size
Weight
400 x 320 x 105 mm
Weight
Description Description
2,2 kg
Black plastic case, cushioned, consists of:
3000ESD Housing
3200 Head / adapter rotating
3231 Adapter fixed
3305Z, 3310Z, 3315 Suction needles bent
2052E suction cup ø 4,5 mm
KDS 260L suction cup ø 9,5 mm
3740 Table holder for 3000ESD
3714Z Membran pump 230 V
3008ESD Tubing system 1,8 m
3717 Air filter
102ACA SMD tweezers 115 mm
Content subject to change without prior notice.
55
NOTES
56
NOTES
57
INDEX
Index Tweezers
Model
Page
024C . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Model
Page
51SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
51SASL . . . . . . . . . . . . . . . . . . . . . . . . . . .9
52ASA . . . . . . . . . . . . . . . . . . . . . . . . . . .11
53CSA . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
1SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
1SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
64SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
65ASA . . . . . . . . . . . . . . . . . . . . . . . . . . .10
2ASA . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
2ASARU . . . . . . . . . . . . . . . . . . . . . . . . .11
2ASASL . . . . . . . . . . . . . . . . . . . . . . . . . .11
2ASASLT . . . . . . . . . . . . . . . . . . . . . . . . .11
2SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
3CBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
3CS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3CSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3CSASL . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3CTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
4SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5ASA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
5ASASL . . . . . . . . . . . . . . . . . . . . . . . . . . .9
5BSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
5CSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
5FSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5MBS . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5SASL . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
91SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Model
Page
OOBSA . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OOCSA . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OODSA . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OOSA . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OOSASL . . . . . . . . . . . . . . . . . . . . . . . . . .6
RRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
SSSA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
SSSASL . . . . . . . . . . . . . . . . . . . . . . . . . . .7
102ACA . . . . . . . . . . . . . . . . . . . . . . . . .12
102ACAX . . . . . . . . . . . . . . . . . . . . . . . .12
103ACA . . . . . . . . . . . . . . . . . . . . . . . . .12
140SA . . . . . . . . . . . . . . . . . . . . . . . . . . .14
141SAP . . . . . . . . . . . . . . . . . . . . . . . . . .14
141SAPH . . . . . . . . . . . . . . . . . . . . . . . . .14
150SA . . . . . . . . . . . . . . . . . . . . . . . . . . .13
150SAD . . . . . . . . . . . . . . . . . . . . . . . . . .12
150SAMB . . . . . . . . . . . . . . . . . . . . . . . .13
150SAMF . . . . . . . . . . . . . . . . . . . . . . . .12
151SA . . . . . . . . . . . . . . . . . . . . . . . . . . .13
249SA . . . . . . . . . . . . . . . . . . . . . . . . .7, 50
249CER . . . . . . . . . . . . . . . . . . . . . . . . . . .7
258SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
500ASA . . . . . . . . . . . . . . . . . . . . . . . . . .14
600ASA . . . . . . . . . . . . . . . . . . . . . . . . . .14
600JSA . . . . . . . . . . . . . . . . . . . . . . . . . .14
608ASA . . . . . . . . . . . . . . . . . . . . . . . . . .14
7SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
7SASL . . . . . . . . . . . . . . . . . . . . . . . . . . .10
940AS . . . . . . . . . . . . . . . . . . . . . . . . . . .13
11N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
15AGS . . . . . . . . . . . . . . . . . . . . . . . . . . .15
15AGW . . . . . . . . . . . . . . . . . . . . . . . . . .15
20AS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
21SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
24SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
25SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
29SA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
29W30 . . . . . . . . . . . . . . . . . . . . . . . . . .15
29Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
30SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
32BSA . . . . . . . . . . . . . . . . . . . . . . . . . . .13
32BSA20 . . . . . . . . . . . . . . . . . . . . . . . . .13
32BSA25 . . . . . . . . . . . . . . . . . . . . . . . . .12
39SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
40SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
58
AAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
AASA . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
AASASL . . . . . . . . . . . . . . . . . . . . . . . . . . .7
AASSL . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
AAZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ACSA . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
AM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
E2ASA . . . . . . . . . . . . . . . . . . . . . . . . . . .11
E3CSA . . . . . . . . . . . . . . . . . . . . . . . . . . .11
E5SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
E7SA . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
EOOSA . . . . . . . . . . . . . . . . . . . . . . . . . .11
M4AS . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
M5S . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Suffix
None
carbone steel
E (Prefix) ergonomic handles
M
Brass, soft material to
avoid damage, no sparks
N
Nickel-Silver alloy, absolut nicht
PYR
Pyroplast coating
RU
anti adhesive coating
S
stainless steel
SA, CA special stainless steel,
non-magnetic, acid resistant
SL
economy version
TA
Titanium, non-magnetic,
lightweight, high temperature
resistant
Z
Nickel plated
INDEX
Index Cutters and Pliers
Model
Page
147A . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
500108 . . . . . . . . . . . . . . . . . . . . . . . . . .36
500103A . . . . . . . . . . . . . . . . . . . . . . . . .46
500104A . . . . . . . . . . . . . . . . . . . . . . . . .46
500104AI . . . . . . . . . . . . . . . . . . . . . . . .46
500154A . . . . . . . . . . . . . . . . . . . . . . . . .47
500154AI . . . . . . . . . . . . . . . . . . . . . . . .47
500210E . . . . . . . . . . . . . . . . . . . . . . . . .46
502E30 . . . . . . . . . . . . . . . . . . . . . . . . . .43
503ET . . . . . . . . . . . . . . . . . . . . . . . . . . .30
503ET . . . . . . . . . . . . . . . . . . . . . . . . . . .30
503ETF . . . . . . . . . . . . . . . . . . . . . . . . . .30
504AE . . . . . . . . . . . . . . . . . . . . . . . . . . .30
505A/BG/BGC/C/E . . . . . . . . . . . . . . . . . .48
50788 . . . . . . . . . . . . . . . . . . . . . . . . . . .45
50789Z . . . . . . . . . . . . . . . . . . . . . . . . . .45
508Z . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
509E . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
510AE . . . . . . . . . . . . . . . . . . . . . . . . . . .42
511E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
512E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
512N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
520E . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
521E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
522E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
522N . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
530E . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
530E15A . . . . . . . . . . . . . . . . . . . . . . . . .36
530S . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
531E . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
532N . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
542E . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
543E . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
544D . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
544E . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
546E . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
547 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
549E . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
552E . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
552S . . . . . . . . . . . . . . . . . . . . . . . . .43, 50
554A . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
554B . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
554E . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
554TX . . . . . . . . . . . . . . . . . . . . . . . . . . .45
555E . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
570E . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
572E . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
573E . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
573EB . . . . . . . . . . . . . . . . . . . . . . . . . . .36
575E . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
576TX . . . . . . . . . . . . . . . . . . . . . . . . . . .26
576Z . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
577E . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
582E . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
582EW . . . . . . . . . . . . . . . . . . . . . . . . . .31
592E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
593AE . . . . . . . . . . . . . . . . . . . . . . . .31, 49
595E . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
595T . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
595TF . . . . . . . . . . . . . . . . . . . . . . . . . . .25
597E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
599E . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
599FO . . . . . . . . . . . . . . . . . . . . . . . . . . .50
599T . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Model
Page
599TF . . . . . . . . . . . . . . . . . . . . . . . . . . .23
599TFO . . . . . . . . . . . . . . . . . . . . . . .23, 50
611E . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
612E . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
612N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
622N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
622NA . . . . . . . . . . . . . . . . . . . . . . . . . .24
622NB . . . . . . . . . . . . . . . . . . . . . . . . . . .25
632N . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
632NCF . . . . . . . . . . . . . . . . . . . . . . . . . .26
670E . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
670EP . . . . . . . . . . . . . . . . . . . . . . . .32, 49
670EPF . . . . . . . . . . . . . . . . . . . . . . .32, 49
676E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
677E . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
710E . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
776E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
792E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Model
Page
3305Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53
3310Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53
3315 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
3330 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
3503A . . . . . . . . . . . . . . . . . . . . . . . . . . .54
3503B . . . . . . . . . . . . . . . . . . . . . . . . . . .54
3714Z . . . . . . . . . . . . . . . . . . . . . . . . . . .55
3717 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
3740 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
3900KC . . . . . . . . . . . . . . . . . . . . . . . . . .51
EROP155 . . . . . . . . . . . . . . . . . . . . . . . . .40
EROP170 . . . . . . . . . . . . . . . . . . . . . . . . .42
EROP171 . . . . . . . . . . . . . . . . . . . . . . . . .42
EROP172 . . . . . . . . . . . . . . . . . . . . . . . . .41
EROP174 . . . . . . . . . . . . . . . . . . . . . . . . .41
EROP277 . . . . . . . . . . . . . . . . . . . . . . . . .41
EROP280 . . . . . . . . . . . . . . . . . . . . . . . . .41
EROP330 . . . . . . . . . . . . . . . . . . . . . . . . .41
EROP331 . . . . . . . . . . . . . . . . . . . . . . . . .40
EROP355 . . . . . . . . . . . . . . . . . . . . . . . . .40
EROP357 . . . . . . . . . . . . . . . . . . . . . . . . .40
EROP419 . . . . . . . . . . . . . . . . . . . . . . . . .40
80013C . . . . . . . . . . . . . . . . . . . . . . . . . .47
808G . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
809IC . . . . . . . . . . . . . . . . . . . . . . . . . . .47
812N . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
822N . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
884E . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
884EPCM . . . . . . . . . . . . . . . . . . . . . . . .27
886E . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
896E . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
1500BSF . . . . . . . . . . . . . . . . . . . . . . . . .34
1503N . . . . . . . . . . . . . . . . . . . . . . . . . . .35
1512N . . . . . . . . . . . . . . . . . . . . . . . . . . .34
1522N . . . . . . . . . . . . . . . . . . . . . . . . . . .34
1522NA . . . . . . . . . . . . . . . . . . . . . . . . .35
1522NB . . . . . . . . . . . . . . . . . . . . . . . . . .35
2040Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53
2041Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53
2044Z . . . . . . . . . . . . . . . . . . . . . . . . . . .53
2052E . . . . . . . . . . . . . . . . . . . . . . . . . . .53
2211P . . . . . . . . . . . . . . . . . . . . . . . . . . .39
2212E . . . . . . . . . . . . . . . . . . . . . . . . . . .27
2222E . . . . . . . . . . . . . . . . . . . . . . . . . . .27
2222EA . . . . . . . . . . . . . . . . . . . . . . . . . .28
2222EB . . . . . . . . . . . . . . . . . . . . . . . . . .28
2232E . . . . . . . . . . . . . . . . . . . . . . . . . . .27
2242E . . . . . . . . . . . . . . . . . . . . . . . . . . .39
2282E . . . . . . . . . . . . . . . . . . . . . . . . . . .33
3000ESD . . . . . . . . . . . . . . . . . . . . . . . . .52
3000KCESD . . . . . . . . . . . . . . . . . . . . . . .55
3000WESD . . . . . . . . . . . . . . . . . . . . . . .54
3008ESD . . . . . . . . . . . . . . . . . . . . . . . . .55
3200 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
3231 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
3232 . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
3303 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
59
SIDE CUTTERS
Round Head
60
G E R M A N Y
G R E A T
Cooper Tools GmbH
Carl-Benz-Str. 2
74354 Besigheim
Tel: (07143) 580-0
Fax: (07143) 580-108
Cooper Tools LtD.
Suite 15, Coniston House
Town Centre
Washington, Tyne & Wear
NE38 7RN
Tel: (0191) 419 7700
Fax: (0191) 417 9421
B R I T A I N
F R A N C E
I T A L Y
S W I T Z E R L A N D
Cooper Tools S.A.
25 Rue Maurice Chevalier BP 46
77832 Ozoir-la-Ferrière Cedex
Tel: (01) 60.18.55.40
Fax: (01) 64.40.33.05
Cooper Italia S.p.A.
Viale Europa 80
20090 Cusago (MI)
Tel: (02) 9033101
Fax: (02) 90394231
Erem S.A.
Rue de la Roselière 8
1400 Yverdon les Bains
Tel: (024) 426 12 06
Fax: (024) 425 09 77
© 2004, Cooper Industries, Inc.
Specifications subject to change without notice.
005 56 851 00 / 03.04 WAL 5.0