Torque Analyzers TorqueLab LTT Series Torque, Angle & Force Analyzer with ARCII Technology KEY FEATURES Accuracy Accuracy 0.5% of reading from 20% to 100% of full scale. 1% of reading from 10% to 20% of full scale. Recommended for all hand screwdrivers, wrenches, or power tools. Features a built-in transducer and can connect to an external transducer. Provides EZ-Plug & Play with Mountz Transducers, Features ARCII technology, an instant auto-recognition system of the transducer connected to the LTT. Selection of six operation modes: Track, Peak, First Peak, Audit, Spindle Audit, and Torque + Angle Seven units of torque measurements: ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm Two units of force measurement: lbf and kN Features built-in Tool Tests operation. Includes three PC Windows based software programs: Mountz Torque Meter Interface Program for sensor calibrations, meter calibration and tool tests. Torque Meter Bootloader for updating the LTT operating systems. Excel Add-In for Real-Time data collection into an Excel spreadsheet. It provides statistics calculations. Flash memory allows upgrades to be done by the user in the field & internet through the USB port. Five low-pass filters: 3000, 2000, 1500, 500, and 200Hz Six-digit display and easy to read menu structure. Real Time Clock for time stamping of readings. Model Item # American Torque Ranges S.I. LTT10i LTT25i LTT50i LTT100i LTT250i LTT50F LTT100F LTT250F 068400 068401 068402 068403 068404 068405 068406 068407 1 - 10 lbf.in 2.5 - 25 lbf.in 5 - 50 lbf.in 10 - 100 lbf.in 25 - 250 lbf.in 5 - 50 lbf.ft 10 - 100 lbf.ft 25 - 250 lbf.ft 11.3 - 113 cN.m 28.25 - 282.5 cN.m 56.5 - 565 cN.m 113 - 1130 cN.m 282.5 - 2825 cN.m 6.8 - 67.8 N.m 13.56 - 135.6 N.m 33.9 - 339 N.m USB interface to download readings to PC. Metric Drive Size Wt. 1.2 - 11.5 kgf.cm 2.9 - 28.8 kgf.cm 5.8 - 57.6 kgf.cm 11.5 - 115 kgf.cm 28.8 - 288 kgf.cm 0.7 - 6.9 kgf.m 1.4 - 13.8 kgf.m 3.5 - 34.5 kgf.m 1/4" F/Sq 1/4" F/Sq 1/4" F/Sq 1/4" F/Sq 1/4" F/Sq 3/8" F/Sq 1/2" F/Sq 1/2" F/Sq 8 lbs. 8 lbs. 8 lbs. 8 lbs. 8 lbs. 8 lbs. 8 lbs. 8 lbs. High Capacity Li-ion Batteries for long life (30 hours with standard transducers and 16 hours with brushless rotary). Can connect to most mv/v transducers and can store calibration data for up to 50 non-smart torque sensors. The 5VDC capability allows unit to be used with a Brushless Rotary Transducer for testing pulse tools and high RPM tools. Torque and Angle data is displayed simultaneously when used with Torque and Angle transducers, up to 8000 RPM for angle measurement. Stores a total of 5000 data points. Real time graph of torque vs. time using associated PC Windows software. CABLE CHART Cable Transducer Item # RTSX-A All BLRTSX models BMX LPX SDX RTSX ETX 072000 072001 072002 072003 072004 072005 072006 ACCESSORIES INCLUDED ACCESSORIES OPTIONAL Universal Charger (100 - 240VAC) USB Cable Mountz Software Programs Run Down Adapter Case Features Go / No Go LEDs that illuminate when high or low setting is achieved. Description Item # Charger 100 - 240VAC USB Cable Battery Pack Multiplexer Bar Code Reader 770300 770319 072506 072998 072997 Mounting Bracket 072608 (for LTT model 10i-50F) Mounting Bracket 072606 (for all other LTT models) PLC Interface LTT 01.3 PLUG & PLAY NOTE! Since a tester cannot always duplicate actual joint characteristic, the torque reading displayed on the LTT may vary from the actual torque that a tool will apply to a joint. When critical assemblies are involved, the torque output of the power tool being used should be verified on the actual assembly using a calibrated measuring torque tool. 072014 CERTIFIED Supplied with NIST-Traceable Certification of Calibration