ETC APXXXXSDXXX

Secure Digital Card
APXXXXSDXXX/APXXXXSDHCX
Secure Digital Card
SD Card 2.0
FEB. 10, 2011
1
© 2011 Apacer Technology, Inc.
Rev .1.3
Secure Digital Card
APXXXXSDXXX/APXXXXSDHCX
FEATURES:
Fully compatible with SD Card standard specification:
–
–
–
SD Memory Card Specifications, Part 1, Physical Layer Specification, Version 2.0
SD Memory Card Specifications, Part 2, File System Specification, Version 2.0
SD Memory Card Specifications, Part 3, Security Specification, version 2.0
Support SPI Mode
Memory capacity: more than 2GB~32GB
Operation voltage: 2.7 ~ 3.6V
Temperature Ranges: -25°C to 85°C for operating commercial
Variable clock rate 0 - 50MHz, up to 25 MB/sec interface speed (using 4 parallel data lines)
Correction of memory field errors
Card Removal during read operation will never harm the content
Copyright Protection Mechanism – Complies with highest security of SDMI standard
Write Protect feature using mechanical switch
Built-in write protection features (permanent and temporary)
Comfortable erase mechanism
Password Protection of cards (Lock_unlock function)
Physical Dimensions
–
24mm x 32mm x 2.1mm
Speed Class:
–
Class2 (2MB/sec minimum performance)
–
Class4 (4MB/sec minimum performance)
–
Class6 (6MB/sec minimum performance)
–
Class10 (10MB/sec minimum performance)
2
© 2011 Apacer Technology, Inc.
Rev .1.3
Secure Digital Card
APXXXXSDXXX/APXXXXSDHCX
TABLE OF CONTENTS
PRODUCT DESCRIPTION ........................................................................................... 4
1.0 ELECTRICAL INTERFACE .................................................................................... 5
1.1 Card Architecture............................................................................................... 5
1.2 Pin Assignment.................................................................................................. 5
2.0 ELECTRICAL SPECIFICATION ............................................................................. 6
3.0 ENVIRONMENTAL SPECIFICATION..................................................................... 6
4.0 PHYSICAL DIMENSIONS....................................................................................... 7
5.0 PRODUCT INFORMATION..................................................................................... 9
6.0 REVISION HISTORY ............................................................................................ 10
3
© 2011 Apacer Technology, Inc.
Rev .1.3
Secure Digital Card
APXXXXSDXXX/APXXXXSDHCX
PRODUCT DESCRIPTION
Apacer SD2.0 Memory Card is designed specifically for SD2.0 Card applications that put a premium on
small form factor with lower power. All device and interface configuration data are (such as maximum
frequency, card identification, etc.) stored on the card. For compatibility with existing controllers, the
SD2.0 memory Card offers, in addition to the SD2.0 card interface, an alternate communication protocol
that is based on the SPI standard.
The SD2.0 Memory Card includes an intelligent controller that manages interfaced protocols and data
storage and retrieval as well as Error Correction Code (ECC) algorithms, defect handling and
diagnostics, power management and Content Protection for Recordable Media related functions.
The SD2.0 Card is data storage Memory Card. It is integrated with controller & NAND type Flash
memory with serial & random access capability. The device is designed for cameras, smart phones,
digital recorders, MP3 players, PDAs, electronic toys, etc. The Apacer SD2.0 card meets SDA (SD card
Association) Specifications. This document gives a general overview of the SD2.0 Memory Card
architecture. A detailed description can be found in “SDA Specifications “.
The SD2.0 Memory Card is a memory card that is specifically designed to meet the security, capacity,
performance and environment requirements inherent in newly emerging audio and video consumer
electronic devices. The SD2.0 Memory Card will include a copyright protection mechanism that complies
with the security of the SDMI standard and will be faster and capable for higher Memory capacity. The
SD2.0 Memory Card security system uses mutual authentication and a "new cipher algorithm" to protect
from illegal usage of the card content. A none secured access to the user‘s own content is also available.
The physical form factor, pin assignment and data transfer protocol are forward compatible with the
Multimedia Card with some additions.
The SD2.0 Memory Card communication is based on an advanced 9-pin interface (Clock, Command,
4xData and 3xPower lines) designed to operate in at maximum operating frequency of 50MHz of and
low voltage range.
4
© 2011 Apacer Technology, Inc.
Rev .1.3
Secure Digital Card
APXXXXSDXXX/APXXXXSDHCX
1.0 ELECTRICAL INTERFACE
1.1 Card Architecture
Write Enabled
1
2
3
4
5
6
1
7 8
2
3
4
5
Write Protected
6
7 8
9
9
1
2
3
4
5
6
7 8
9
VDD
DAT2
CMD
CD/DAT3
CLK
DAT0
DAT1
Interface driver
WP
WP
WP
Card interface
controller
reset
Memory core interface
Power on detection
Memory card registers
[384 bytes]
reset
Memory Core
1.2 Pin Assignment
Pin
1
2
3
4
5
6
7
8
9
Name
CD/DAT3
CMD
VSS1
VDD
CLK
VSS2
DAT0
DAT1
DAT2
SD Mode
Description
Card detect/Data line[Bit 3]
Command/Response
Supply voltage ground
Supply voltage
Clock
Supply voltage ground
Data line[Bit 0]
Data line[Bit 1]
Data line[Bit 2]
Name
CS
DI
VSS
VDD
SCLK
VSS2
DO
Reserved
Reserved
SPI Mode
Description
Chip select
Data in
Supply voltage ground
Supply voltage
Clock
Supply voltage ground
Data out
5
© 2011 Apacer Technology, Inc.
Rev .1.3
Secure Digital Card
APXXXXSDXXX/APXXXXSDHCX
2.0 ELECTRICAL SPECIFICATION
Absolute Maximum Ratings (Permanent device damage may occur if absolute maximum ratings are
exceeded. Functional operation should be restricted to the conditions as detailed in the optional sections
of this datasheet. Exposure to absolute maximum rating conditions for extended periods may affect
reliability.)
Operating Conditions
SYMBOL
VCC
VSS
TSTG
TOP
PARMETER
Power supply voltage
Supply voltage ground
Storage temperature
Operation temperature
RATING
2.7 ~ 3.6
0
-40 ~ 85
-25 ~ 85
UNITS
V
V
O
C
O
C
3.0 ENVIRONMENTAL SPECIFICATION
Item
Temperature
Moisture & Corrosion
Bending
Torque
Drop test
ESD at contact pad
ESD at card body
Min. moving force of WP
WP switch cycles
Specification
℃ ℃
℃ ℃
℃
℃
Operation: -25 ~ 85
Storage: -40 ~ 85
Junction temperature : max. 90 for 5 minutes
Operation: 25 / 95% rel. humidity
Storage: 40 / 93% rel. humidity/500h
Salt water spray: 3% NaCl/35 ; 24hrs acc. MIL STD 1009
10N
+/- 2.5 degree
1.5m free fall
+/- 4 KV
+/- 8 KV
40 gf (write protect switch; WP)
Min. 1000 cycles (@slide force 0.4N to 5N)
℃
℃
6
© 2011 Apacer Technology, Inc.
Rev .1.3
Secure Digital Card
APXXXXSDXXX/APXXXXSDHCX
4.0 PHYSICAL DIMENSIONS
PHYSICAL MECHANICAL OUTLINE:
24mmx32mm
Dimensions Card Package Min. 23.9mmx31.9mm
Max.24.1mmx32.1mm
Thickness
2.1mm +/- 0.15mm
Surface
Plain (except contact area)
Edges
Smooth edges
7
© 2011 Apacer Technology, Inc.
Rev .1.3
Secure Digital Card
APXXXXSDXXX/APXXXXSDHCX
8
© 2011 Apacer Technology, Inc.
Rev .1.3
Secure Digital Card
APXXXXSDXXX/APXXXXSDHCX
5.0 PRODUCT INFORMATION
Capacity
2GB 60X
P/N
AP2GSD60
2GB 100X
AP2GSD100
4GB Class2
AP4GSDHC2
8GB Class2
AP8GSDHC2
16GB Class2
AP16GSDHC2
32GB Class2
AP32GSDHC2
4GB Class4
AP4GSDHC4
8GB Class4
AP8GSDHC4
16GB Class4
AP16GSDHC4
32GB Class4
AP32GSDHC4
4GB Class6
AP4GSDHC6
8GB Class6
AP8GSDHC6
16GB Class6
AP16GSDHC6
8GB Class10
AP8GSDHC10
16GB Class10 AP16GSDHC10
32GB Class10 AP32GSDHC10
Note: Valid combinations are those products in mass production or will be in mass production.
Consult your Apacer sales representative to confirm availability of valid combinations and to
determine availability of new combinations.
9
© 2011 Apacer Technology, Inc.
Rev .1.3
Secure Digital Card
APXXXXSDXXX/APXXXXSDHCX
6.0 REVISION HISTORY
Revision
1.0
1.1
1.2
1.3
Date
History
10/12/2006 Release
04/02/2010 Revise PN
11/12/2010 Revise PN
02/10/2011 Revise FEATURES
Remark
10
© 2011 Apacer Technology, Inc.
Rev .1.3