cPCI-6210 Series 6U CompactPCI® Quad-Core 2nd Generation Intel® Core™ i7 Processor Host/Peripheral Blade Features KB/MS 6U cPCI Blades PMC/ XMC DP DVI-I COM LAN Quad-core Intel® Core™ i7-2710QE processor @2.1GHz DisplayPort, DVI and VGA graphics interfaces SATA 6 Gb/s and CFast storage interfaces PCI Express x8 XMC slot in 8HP version Remote management support USB COM cPCI-6210 CompactPCI cPCI-6210D R Specifications 2 Processor & System Storage CPU uFC-PGA Intel® Core™ i7-2710QE Processor 2.1GHz (Turbo boost to 3GHz), 6MB LLC, 45W TDP (4C) uFC-PGA Intel® Core™ i5-2510E Processor 2.5GHz (Turbo boost to 3.2GHz), 3MB LLC, 35W TDP (2C) uFC-PGA Intel® Celeron® B810 Processor 1.6GHz, 2MB LLC, 35W TDP (2C) Supports Intel® Hyper-Threading and Turbo Boost Technology for Core™ i5/i7 processors Intel® QM67 PCH Dual channel DDR3-1066/1333/1600 SDRAM via two SODIMM sockets, up to 16GB capacity (dependent on available memory modules) AMI® EFI BIOS, 64Mbit SPI flash memory PCI 64bit/ 66MHz, 3.3V or 5V universal V(I/O) Supports operation in system slot as master or in peripheral slot as stand-alone blade without connectivity to CompactPCI® bus (Satellite mode) PICMG 2.0 CompactPCI R3.0 PICMG 2.1 Hot Swap R2.0 PICMG 2.9 System Management R1.0 PICMG 2.16 Packet Switch Backplane R1.0 SBC RTM One PCI 32bit, 33/66MHz PMC or PCIe x8 XMC site (8HP only) Three PCI Express Intel® 82574L GbE and one Intel® 82579LM PHY controllers for four 10/100/1000BASE-T ports Three RJ-45 ports on front panel; two to J3 for PICMG 2.16 (one switched from front panel) Supports KVM Redirection and SOL Integrated in Intel® Core™ processor, 3D engine One DVI-I (digital+analog) port on front panel, analog RGB is switchable to rear, supports up to QXGA 2048x1536 pixels @75Hz, 32bits One dual mode DisplayPort on front panel, supports up to 2560×1600 pixels @60Hz; DVI, VGA and HDMI interfaces are available by adapter cables One DVI port routed to rear Additional discrete ATI/AMD E4690 GPU supporting two DVI-I ports on RTM cPCI-R6700 Up to four independent displays Up to three USB 2.0 front panel ports Six USB ports routed to rear Front panel PS/2 keyboard mouse port Up to two serial ports on front panel (1 for 4HP, 2 for 8HP) Supports RS-232/422/485 on COM1 Additional two serial ports routed to rear High Definition Audio signals routed to rear Hardware Monitor Chipset Memory BIOS CompactPCI Bus PICMG Standards Connectivity PMC/XMC Ethernet Graphics USB PS/2 Serial Port Audio 2-11 http://www.adlinktech.com/cPCI/ One SATA 6 Gb/s direct connector for 2.5” onboard HDD/SSD One SATA 6 Gb/s signal connector (7-pin) on board Onboard CFast socket on SATA 3 Gb/s Up to 3 SATA ports CF (x1) and SD (x1) sockets Eight SAS ports by LSISAS1068E with hardware RAID by two mini SAS x4 connectors Operating System OS Microsoft Windows® XP Microsoft Windows® 7 RedHat Enterprise Linux 6 Fedora 14 Wind River VxWorks 6.9, 6.8, 5.4 (Please contact ADLINK for other OS support) Miscellaneous LED Battery TPM Watchdog Timer Power, WDT, Hard Disk, Hot Swap Coin cell lithium battery onboard for RTC CMOS RAM Atmel AT97SC3204 (optional, support upon request) System Reset and NMI, with programmable interval, 1-65535 seconds or minutes Monitors CPU temperature, system temperature, Vcore and DC voltages Mechanical & Environmental Form Factor Operating Temperature Storage Temperature RH Humidity Shock Vibration Power Consumption* EMI/EMC 6U 4HP/8HP CompactPCI® 233.33mm x 160mm (LxW) Equipped with CompactPCI connectors J1, J2, J3, J5 0°C to 60°C -40°C to 70°C extended temperature (cPCI-ET6210 models) -40°C to +85°C extreme extended temperature (CPUs with 35W TDP, 8HP only) -40°C to 85°C 95% non-condensing 15G peak-to-peak, 11ms duration, non-operating 2 Grms random vibration, 5-500Hz, each axis [email protected], 7.9A@5V, total 44W for Core i5-2510E [email protected], 13.56A@5V, total 72.3W for Core i7-2710QE *100% CPU loading under Windows XP with Turbo Boost and Hyper-Threading enabled EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3 1 AdvancedTCA I/O Table GbE USB 2.0 COM 3 3 1(1) (DB-9) 3 3 2 (DB-9) DVI VGA DP PMC/ XMC SATA CFast CF Mic-in Line-out PS/2 KB/MS SD SAS 2 SBC Faceplate 1 (DVI-I) 1 1 Onboard cPCI-6210D Faceplate 1 (DVI-I) (1) 6U cPCI Blades cPCI-6210 2(3) 1 2(3) 1 1 1 Onboard 1 RTM cPCI-R6100 Faceplate 4 4 1 1 Onboard cPCI-R6110 Faceplate 2 4 Faceplate 2 5 1 (DB-9) 1 (5-pin) 1(4) (10-pin) 3 1 (DB-9) 2 1(4) (10-pin) 2 Onboard cPCI-R6500D Faceplate 1 1 2 1 1 (10-pin) 1 (6) 1 (DVI-I) 1 1 1 4 (SFF8088) 1(5) 3(5) 4 (SFF8087) 2 (DVI-I) 1 3(7) (7-pin) 1 (10-pin) 3(7) (7-pin) 1 (10-pin) 5 2 (DVI-I+DVI-D) 2 (2) 1 (10-pin) (1) RS-232/422/485 selectable (2) One RS-232/422/485 selectable, one Tx, Rx signals only (3) One for onboard 2.5” SATA, one 7-pin connector for external HDD (4) Tx, Rx signals only (5) Two 7-pin signal connectors onboard for external HDDs and one direct connector for onboard 2.5” SATA HDD. SATA direct connector can be replaced by CompactFlash adapter (DB-6920CF) for CF slot (6) Converted from USB (7) Space is reserved onboard for one 2.5” SATA drive. 6 Industrial Computers Ordering Information Model Number Description/Configuration Processor Blades 4HP cPCI-6210 with Intel® i7-2710QE processor and 2x 4GB DDR3-1333 SODIMM with GbE x3, COM, DP, DVI-I, USB x3, SATA x2, PS/2 KB/MS, CFast cPCI-R6500D cPCI-6210/510E/M4G 4HP cPCI-6210 with Intel® i5-2510E processor and 2x 2GB DDR3-1333 SODIMM with GbE x3, COM, DP, DVI-I, USB x3, SATA x2, PS/2 KB/MS, CFast See 6U RTM selection guide for more options 4HP Rear I/O module with GbE x2, USB x4, SATA x3, VGA, PS/2, CF, SD socket cPCI-R6200 cPCI-R6700D 8HP Rear I/O module with GbE x2, USB x6, DVI-I, SATA x3, Mic-in, Line-out, PS/2 KB/MS, SAS x8 DisplayPort to DVI adapter cable DP-VGA cable DisplayPort to VGA adapter cable DP-HDMI cable DisplayPort to HDMI adapter cable CF DVI-D COM LAN SATA DVI-I KB/MS COM USB GbE MxM Module DVI-I x2 USB PS/2 KB/MS COM GbE USB eSAS SATA x3 cPCI-R6500D cPCI-R6100 cPCI-R6700D cPCI-R6200 2-12 USB x3 LAN x2 9 SSDs Line-out LAN Mic-in PS/2 KB/MS USB x4 SATA USB SATA LAN iSAS SD VGA COM DVI 8HP Rear I/O module with discrete GPU ATI/AMD E4690, DVI-I x2, GbE x2, USB x3, COM x2, PS/2, SATA x3, audio USB x2 8 IPC Accessories cPCI-R6110 DP-DVI cable Contact us for different CPU, memory, HDD and CFast combinations. See 6U RTM selection guide for more options. Rear Transition Modules 4HP Rear I/O module with GbE x4, COM, USB x4, SATA x2, DVI, VGA, PS/2, CF, SD socket 7 Accessories 8HP cPCI-6210 with Intel® i7-2710QE processor and 2x 4GB DDR3-1333 SODIMM with GbE x3, COM x2, DP, DVI-I, USB x3, SATA x2, PS/2 KB/MS and PMC/XMC, CFast cPCI-R6100 2-slot 8HP cPCI-R6500DAC with AMD Radeon E6760 MXM module, 2x GbE, 1x DVI-I, 1xDVI-D, 1x USB, , 3x SATA and 10-pin KB/MS, audio, 2x COM headers Embedded Computing Systems cPCI-6210/710Q/M8G cPCI-6210D/710Q/M8G 4 3U cPCI Platforms Onboard 3 1 3U cPCI Blades Faceplate 1(6) (5) Onboard cPCI-R6700D 2 (7-pin) 1 Onboard cPCI-R6200 3 1 6U cPCI Platforms 1 (RJ-45)