EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs With Lens 67-21BUPGC/A003-3/TR8 Features ˙P-LCC-2 package. ˙High flux output. ˙High current capability. ˙White package. ˙Optical indicator. ˙Colorless clear window. ˙Ideal for backlight and light pipe application. ˙Inter reflector. ˙Suitable for automatic placement equipment. ˙Suitable for reflow and wave solder processes. ˙Available on tape and reel (12mm Tape). ˙Pb-free. ˙The product itself will remain within RoHS compliant version. Descriptions The 67-21B series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the 67-21B series LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ˙Automotive: dashboard, indicator and switch. ˙Indicator and backlight for audio and video equipment. ˙Indicator and backlight in office and family equipment. ˙Flat backlight for LCD’s, switches and symbols. ˙Light pipe application. ˙General use. Device Selection Guide Chip Material Emitted Color AlGaInP Pale Green Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 11 Device No. :DSE-67B-047 Prepared date:23-Apr-2006 Prepared by : Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. 67-21BUPGC/A003-3/TR8 Package Dimensions CL 2.2±0.1 2.8±0.2 CL - + 3.25±0.2 Polarity 3.0 Recommend soldering pad design Note: The tolerances unless mentioned is ±0.1mm;Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 11 Device No. :DSE-67B-047 Prepared date:23-Apr-2006 Prepared by : Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. 67-21BUPGC/A003-3/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 12 V Forward Current IF 30 mA Peak Forward Current(Duty 1/10 @ 1KHz) IFP 80 mA Power Dissipation Pd 100 mW Electrostatic Discharge (HBM) ESD 2000 V Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40~ +110 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics (Ta=25℃) : Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 71 ----- 140 mcd IF=30mA Viewing Angle 2θ1/2 ----- 60 ----- deg IF=30mA Peak Wavelength λp ----- 560 ----- nm IF=30mA Dominant Wavelength λd 557 ----- 561 nm IF=30mA Spectrum Radiation Bandwidth △λ ----- 20 ----- nm IF=30mA Forward Voltage VF 1.80 ----- 2.40 V IF=30mA Reverse Current IR ----- ----- 10 µA VR=12V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 11 Device No. :DSE-67B-047 Prepared date:23-Apr-2006 Prepared by : Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. 67-21BUPGC/A003-3/TR8 Bin Range Of Dominant Wavelength Bin Code Min. Max. A 557 559 B 559 561 Unit Condition nm IF=30mA Unit Condition mcd IF=30mA Unit Condition V IF=30mA Bin Range Of Luminous Intensity Bin Min Max Q1 71 90 Q2 90 112 R1 112 140 Bin Range Of Forward Voltage Bin 2B-1 Min 1.80 Max 1.90 3A 3B 4A-1 1.90 2.05 2.20 2.05 2.20 2.40 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 11 Device No. :DSE-67B-047 Prepared date:23-Apr-2006 Prepared by : Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. 67-21BUPGC/A003-3/TR8 Typical Electro-Optical Characteristics Curves Typical curve of spectral distribution: V(λ)=Standard eye response curve Relative Intensity (%) 100 V(λ) 50 UPG 0 400 450 500 550 600 650 700 Wp (nm) Diagram characteristics of radiation: o o 20 10 o 0 1.0 o 30 0.8 o View Angle 50 0.6 o 60 0.4 o 70 Relative Intensity o 40 0.2 o 80 o 0 90 1.0 0.8 0.6 0.4 Relative Intensity 0.2 0 o 20 o o 60 40 View Angle o 80 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 11 Device No. :DSE-67B-047 Prepared date:23-Apr-2006 Prepared by : Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. 67-21BUPGC/A003-3/TR8 Forward Current vs. Forward Voltage Ta=25℃ Forward Curren t I F (mA) 100 10 1 0.1 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 Forward Voltage V F (V) IF(mA) Forward current v.s. Ambient Temp. 40 35 30 25 20 15 10 5 0 0 20 40 60 80 100 T (degree C) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 11 Device No. :DSE-67B-047 Prepared date:23-Apr-2006 Prepared by : Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. 67-21BUPGC/A003-3/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 11 Device No. :DSE-67B-047 Prepared date:23-Apr-2006 Prepared by : Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. 67-21BUPGC/A003-3/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. + Polarity Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 11 Device No. :DSE-67B-047 Prepared date:23-Apr-2006 Prepared by : Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. 67-21BUPGC/A003-3/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage 5 Low Temperature Storage Temp. : -40℃ 6 DC Operating Life IF = 20 mA / 25℃ 7 High Temperature / High Humidity 85℃/ 85%RH Temp. : 100℃ 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 11 Device No. :DSE-67B-047 Prepared date:23-Apr-2006 Prepared by : Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. 67-21BUPGC/A003-3/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260 °C Max 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 11 Device No. :DSE-67B-047 Prepared date:23-Apr-2006 Prepared by : Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. 67-21BUPGC/A003-3/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 11 of 11 Device No. :DSE-67B-047 Prepared date:23-Apr-2006 Prepared by : Ray Yuan