EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/B2C-AY1Z0MZ3/CT Features ․P-LCC-3 package. ․High flux output. ․High current capability. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (12mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․ The 67-31H series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Resin Color Blue Water Clear Material InGaN Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 11 Device No. : DSE-0000673 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/B2C-AY1Z0MZ3/CT Package Dimensions ± ± ± ± Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 11 Device No. : DSE-0000673 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/B2C-AY1Z0MZ3/CT Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 50 mA IFP 100 mA Power Dissipation Pd 120 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 11 Device No. : DSE-0000673 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/B2C-AY1Z0MZ3/CT Electronic Optical Characteristics Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 2850 ----- 7200 mcd IF=30mA Viewing Angle 2θ1/2 ----- 30 ----- deg IF=30mA Peak Wavelength λP ----- 468 ----- nm IF=30mA Dominant Wavelength λd ----- 470 ----- nm IF=30mA Spectrum Radiation Bandwidth △λ ----- 25 ----- nm IF=30mA Forward Voltage VF 2.7 ----- 3.7 V IF=30mA Reverse Current IR ----- ----- 10 μA VR=3V Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 11 Device No. : DSE-0000673 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/B2C-AY1Z0MZ3/CT Bin Range of Luminous Intensity Bin Code Min. Max. Y1 2850 3600 Y2 3600 4500 Z01 4500 5700 Z02 5700 7200 Unit Condition mcd IF=30mA Unit Condition nm IF=30mA Unit Condition V IF=30mA Bin Range of Dominant Wavelengths Bin Code Min. Max. A8 460.5 465.5 A9 463.5 468.5 Bin Range of Forward Voltage Bin Code Min. Max. 00 1.55 1.75 0 1.75 1.95 1 1.95 2.15 Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 11 Device No. : DSE-0000673 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/B2C-AY1Z0MZ3/CT Typical Electro-Optical Characteristic Curves Forward Current vs. Forward Voltage Ta=25°C Forward Current IF (mA) 100 75 50 25 0 500 550 600 650 Wavelength λ (nm) 60 50 40 30 1.0 10 0 20 40 60 80 100 1000 2.2 2.6 3.0 f=1KHz Duty=1/10 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram 0° 10° Forward Current Derating Curve Forward Current IF (mA) 1.8 Relative Luminous Intensity vs. Forward Current Ta=25°C 100 1 -60 -40 -20 1.4 Forward Voltage VF (V) Relative Luminous Intensity vs. Ambient Temperature 1000 Ta=25°C 70 20 700 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) Spectrum Distribution 80 Ta=25°C 20° 30° 70 60 50 40 30 20 0.9 50° 0.8 60° 70° 0.7 10 0 40° 1.0 20 40 60 85 100 Ambient Temperature Ta (°C) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 11 Device No. : DSE-0000673 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/B2C-AY1Z0MZ3/CT Label Explanation (1) CPN：Customer’s Product Number (2) P/N：Product Number (3) QTY：Packing Quantity (4) CAT：Luminous Intensity Rank (5) HUE：Dom. Wavelength Rank (6) REF：Forward Voltage Rank (7) LOT No：Lot Number Reel Dimensions Note：Tolerance unless dimension ±0.1mm. Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 11 Device No. : DSE-0000673 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/B2C-AY1Z0MZ3/CT Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel + + + - Note：Tolerance unless dimension ±0.1mm; Unit = mm Moisture Resistant Packing Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 11 Device No. : DSE-0000673 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/B2C-AY1Z0MZ3/CT Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering Test Condition Temp. : 260℃±5℃ Min. 5 sec. Test Hours/Cycles Sample Size Ac/Re 6 Min. 22 PCS 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 15min 2 Temperature Cycle ∫ 5 min L : -40℃ 15min H : +100℃ 5min 3 Thermal Shock ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 50 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 11 Device No. : DSE-0000673 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/B2C-AY1Z0MZ3/CT Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LED should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED floor life is 1 year under 30℃ or less and 60% RH or less. If unused LED remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LED have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 11 Device No. : DSE-0000673 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/B2C-AY1Z0MZ3/CT 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 11 Device No. : DSE-0000673 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang