Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 1A SURFACE MOUNT ULTRA FAST RECOVERY RECTIFIERS HFM101M THRU HFM107M FEATURES z FOR SURFACE MOUNTED APPLICATIONS z LOW PROFILE PACKAGE z BUILT-IN STRAIN RELIEF z EASY PICK AND PLACE z PLASTIC MATERIAL USED CARRIES UNDERWRITERS LABORATORY CLASSIFICATION 94 V-0 z ULTRA FAST SWITCHING z GLASS PASSIVATED CHIP JUNCTION z HIGH TEMPERATURE SOLDERING: 250°C/10 SECONDS AT TERMINALS .161(4.1) .146(3.7) .071(1.8 ) .055(1.4 ) .0012(0.3) Typ. .126(3.2) .110(2.8) MECHANICAL DATA z CASE: MOLDED PLASTIC, SOD-123, DIMENSIONS IN INCHES AND (MILLIMETERS) z TERMINALS: SOLDER PLATED z POLARITY: INDICATED BY CATHODE BAND z WEIGHT: 0.04 GRAMS .063(1.6) .055(1.4) .035(0.9) Typ. .035(0.9) Typ. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL HFM101M HFM102M HFM103M HFM104M HFM105M HFM106M HFM107M UNITS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT AT TL=90°C MAXIMUM OVERLOAD SURGE 8.3ms SINGLE HALF SINE-WAVE TYPICAL JUNCTION CAPACITANCE (NOTE 1) TYPICAL THERMAL RESISTANCE (NOTE 2) VRRM VRMS VDC STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V IO 1.0 A IFSM 30 A CJ θJL 20 30 15 PF °C/W TSTG -55 TO + 150 ℃ TOP -55 TO + 125 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL HFM101M HFM102M HFM103M HFM104M HFM105M HFM106M HFM107M UNITS MAXIMUM FORWARD VOLTAGE AT 1A AND 25℃ VF MAXIMUM REVERSE CURRENT AT 25℃ IR 1.0 1.3 V μA 10 MAXIMUM REVERSE RECOVERY TIME (NOTE 3) TRR 50 MARKING H1 H2 H3 H4 H5 NOTE: 1. MEASURED AT 1.0 MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 V 2. THERMAL RESISTANCE FROM JUNCTION TO TERMINAL 5.0mm2 (.013 mm THICK) LAND AREAS 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25 A HFM101M THRU HFM107M 1.7 75 H6 Page: 1 nS H7 RATINGS AND CHARACTERISTIC CURVE HFM101M THRU HFM107M FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50Ω NO INDUCTIVE 10Ω NO INDUCTIVE FIG. 2-TYPICAL FORWARD CURRENT DERATING CURVE Trr (-) +0.5A 2.0 PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) 0 -0.25A 1Ω NON INDUCTIVE (-) AVERAGE FORWARD CURRENT (A) D.U.T. OSCILLOSCOPE ( NOTE 1 ) (+) -1.0A NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS 1cm o TJ=80 C TJ=25oC 0.1 40 60 80 100 120 140 INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT (uA) TJ=100oC 20 0 LEAD TEMPERATURE (oC) FIG. 4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 1 P.C.B MOUNTED ON 0.3×0.3”(8.0×8.0mm) COPPER PAD 25 50 75 100 125 150 175 FIG. 3-TYPICAL REVERSE CHARACTERISTICS 10 1.0 SET TIME BASE FOR 10/20 ns/cm 100 Single Phase Half Wave60 Hz Resistive or Inductive Load 100 HFM101M~103M 10 HFM104M 1 HFM105M~107M .1 .01 .2 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) .4 .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE (V) FIG. 6-TYPICAL JUNCTION CAPACITANCE FIG. 5-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 200 TJ=25oC 8.3 ms Single Half Sine Wave 50 (JEDEC Method) 40 30 20 10 0 0 1 2 4 6 10 20 40 60 NUMBER OF CYCLES AT 60 Hz HFM101M THRU HFM107M 100 JUNCTION CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT (A) 60 100 HFM101M~103M 40 20 10 6 4 HFM105M~107M 2 1 .1 .2 .4 1.0 2 4 10 20 40 REVERSE VOLTAGE (V) Page: 2 100