Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 1A SURFACE MOUNT FAST EFFICIENT RECOVERY RECTIFIERS EFM11M THRU EFM18M FEATURES z FOR SURFACE MOUNTED APPLICATIONS z LOW PROFILE PACKAGE z BUILT-IN STRAIN RELIEF z EASY PICK AND PLACE z PLASTIC MATERIAL USED CARRIES UNDERWRITERS LABORATORY CLASSIFICATION 94 V-0 z HIGH TEMPERATURE SOLDERING: 250°C/10 SECONDS AT TERMINALS .161(4.1) .146(3.7) .071(1.8 ) .055(1.4 ) .0012(0.3) Typ. .126(3.2) .110(2.8) MECHANICAL DATA z CASE: MOLDED PLASTIC, SOD-123, DIMENSIONS IN INCHES AND (MILLIMETERS z TERMINALS: SOLDER PLATED z POLARITY: INDICATED BY CATHODE BAND z WEIGHT:0.04 GRAMS .063(1.6) .055(1.4) .035(0.9) Typ. .035(0.9) Typ. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED INGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL EFM11M EFM12M EFM14M EFM15M EFM16M EFM18M UNITS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT AT TL=90°C MAXIMUM OVERLOAD SURGE 8.3ms SINGLE HALF SINE-WAVE TYPICAL JUNCTION CAPACITANCE (NOTE 1) VRRM VRMS VDC 50 35 50 100 70 100 TYPICAL THERMAL RESISTANCE (NOTE 2) RθjL 20 ℃/W STORAGE TEMPERATURE RANGE TSTG -55 TO + 150 ℃ OPERATING TEMPERATURE RANGE TOP -55 TO + 125 ℃ IO IFSM CJ 200 140 200 300 210 300 400 280 400 600 420 600 1.0 V V V A 30 15 A PF 10 ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL EFM11M EFM12M EFM14M EFM15M EFM16M EFM18M UNITS MAXIMUM FORWARD VOLTAGE AT 1.0A AND 25℃ VF MAXIMUM REVERSE CURRENT AT 25℃ IR 0.98 1.25 V μA MAXIMUM REVERSE RECOVERY TIME (NOTE3) TRR 25 MARKING E1 E2 E4 E5 NOTE: 1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS 2. THERMAL RESISTANCE FROM JUNCTION TO AMBIENT AND JUNCTION TO LEAD P.C.B. MOUNTED ON 0.3×0.3”(8.0×8.0mm) COPPER PAD AREAS 3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A EFM11M THRU EFM18M 1.75 10 nS E6 Page: 1 E8 RATINGS AND CHARACTERISTIC CURVE EFM11M THRU EFM18M FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50Ω NO INDUCTIVE FIG. 2-TYPICAL FORWARD CURRENT DERATING CURVE Trr 100Ω NO INDUCTIVE 2.0 (-) D.U.T. PULSE GENERATOR ( NOTE 2 ) (+) 25 Vdc (approx) 1Ω NON INDUCTIVE (-) OSCILLOSCOPE ( NOTE 1 ) 0 -0.25A (+) CURRENT (A) AVERAGE FORWARD +0.5A 1.0 Single Phase Half Wave 60 Hz Resistive or Inductive Load 0 25 1cm NOTE: 1. RISE TIME=7ns MAX. INPUT IMPEDANCE=1 MOhms 22PF 2. RISE TIME =10ns MAX. SOURCE IMPEDANCE=50 OHMS P.C.B MOUNTED ON 0.3×0.3”(8.0×8.0mm) COPPER PAD AREAS 50 75 100 125 150 175 LEAD TEMPERATURE (oC) SET TIME BASE FOR 10/20 ns/cm FORWARD CHARACTERISTICS 10 100 TJ=100oC 10 TJ=80oC 1.0 TJ=25oC 0.1 0.01 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT (uA) FIG. 4-TYPICAL INSTANTANEOUS FIG. 3-TYPICAL REVERSE CHARACTERISTICS EFM11M~14M 1.0 EFM15M~16M .1 .01 EFM18M .001 0 .2 .4 .6 .8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE (V) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 5-MAXIMUN NON-REPETITIVE FIG. 6-TYPICAL JUNCTION CAPACITANCE FORWARD SURGE CURRENT 200 8.3 ms Single Half Sine Wave (JEDEC Method) 30 25 20 15 10 5 0 100 JUNCTION CAPACITANCE (pF) PEAK FORWARD SURGE CURRENT (A) 40 40 TJ=25oC EFM11M~14M 20 10 6 4 EFM15M~18M 2 1 1 5 10 20 50 NUMBER OF CYCLES AT 60 Hz EFM11M THRU EFM18M 100 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE (V) Page: 2