3.0x2.0mm SURFACE MOUNT LED LAMP Part Number: AA3021PR4S/Z-W2 PRELIMINARY SPEC Warm White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.0mm x 2.0mm, 1.3mm high, only minimum space required. The source color devices are made with InGaN Light z Suitable for compact optoelectronic applications. Emitting Diode. z Low power consumption. Static electricity and surge damage the LEDS. z Package : 2000pcs / reel. It is recommended to use a wrist band or anti-electrostatic z Moisture sensitivity level : level 4. glove when handling the LEDs. z RoHS compliant. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 Selection Guide Part No. Dice AA3021PR4S/Z-W2 Warm White (InGaN) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 2θ1/2 480 600 125° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device VF [1] Forward Voltage Warm White CCT Color Temperature Warm White IR Reverse Current Warm White C Capacitance Warm White Min. 2780 Typ. Max. Units Test Conditions 3.2 3.7 V IF=20mA 3000 3310 K IF=20mA 10 uA VR = 5V pF VF=0V;f=1MHz 110 Note: 1.Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Warm White Units Power dissipation 111 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 Warm White AA3021PR4S/Z-W2 SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 AA3021PR4S/Z-W2 W2 bin code 0.46 0.44 4000 K 4 3 5 0.42 5000 K 0.40 6000 K 0.38 y 7000 K 0.36 2500 K 3000 K 0.34 0.32 0.30 0.28 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 x Bin 3 x y 0.4674 0.4367 0.4541 0.4327 0.4272 0.3783 0.4379 0.3814 CCT: 2780~2930K 4 0.4541 0.4327 0.4405 0.4278 0.4163 0.3745 0.4272 0.3783 CCT: 2930~3120K 5 0.4405 0.4278 0.4258 0.4214 0.4047 0.3697 0.4163 0.3745 CCT: 3120~3310K SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 AA3021PR4S/Z-W2 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 PACKING & LABEL SPECIFICATIONS AA3021PR4S/Z-W2 SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237