DIP Clips® for 8-14-16-20 Pin Clips Pomona DIP Clip® test clips are designed for testing dual-in-line IC packages on PC boards. These devices incorporate many built-in features that assure a positive electrical connection as well as hands free testing. • Contacts (.040" wide on lower end) are serrated for the best electrical contact. • .025" X .028" serrated test points on upper end will accept wire wraps or mini test clips. • Molded barriers between contacts allows live board connections without accidental shorting of contacts. • Can also be used as an insertion tool for DIPs. • Contacts are spring tempered Nickel Silver or Gold Plated Beryllium Copper alloy. Oxide penetrating clips have a roughened stainless steel surface treatment. • Open back option allows probing on the chip leads while clip is attached. Pomona's DIP Clip® test clips are perfect for emulation, field service, failure analysis, and for use with logic analyzers. Model# 5108 5208 5014 5114 3916A 5220 Size Pins 8 8 14 14 16 20 Clip Width 0.43in (10.9mm) 0.43in (10.9mm) 0.72in (18.3mm) 0.72in (18.3mm) 0.83in (21.1mm) 1.03in (26.2mm) Type Standard DIP Clip® Open Back DIP Clip® Standard DIP Clip® Open Back DIP Clip® Standard DIP Clip® Open Back DIP Clip® Contact Material and Plating Be-Cu, Gold Plate Be-Cu, Gold Plate Nickel Silver Nickel Silver Nickel Silver Be-Cu, Gold Plate All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. USA: Sales: 800-490-2361 Fax: 425-446-5844 Technical Support: [email protected] Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com Rev: 100 D1094200 Page 1 of 1