ASP-149117-01 CL REVISION 4 4 5 20.80 .819 REF 15.05 .593 REF PRODUCT MANUFACTURED Pb THIS WITH LEAD-FREE PROCESSING 4 3 23.95 .943 REF 4 22.95 .904 REF C C1-B,I-OG 0.635 .0250 (TYP) (TOL. NON-ACCUM) C 21.59 .850 C2-B,I-OG "A" 4 01 35 ROW A 1.68 .066 REF ROW B NOTES: ROW C 13.34 .525 REF 1. C REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE: 2.22N[0.5 LB]. 3. INSPECT DIMENSION AT BOTH ENDS OF PART. ALL VISIBLE SOLDER CRIMPS TO BE CHECKED. 4. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL BE SUPPLIED. FOR QUANTITIES OF 50-124 PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED. 5. PARTS TO BE PACKAGED IN TAPE AND REEL. 6. ATTACH LABEL "ASP-149117-01" TO EACH TAPE & REEL PACKAGE. 7. MEASUREMENT MUST BE TAKEN FROM THE LOWEST POINT OF THIS SURFACE (STANDOFF). C C11-B,I-XR 8. SOLDER COMPOSITION; 96.5% TIN/3.5% SILVER. 9. MEASUREMENT MUST BE TAKEN TO BACK CAP. 4 10. CHECK DIMENSION AT FIRST AND LAST ROW OF TAILS. ROW D NOT RELEASED FOR PRODUCTION USE FOR QUOTING, PRELIMINARY DESIGN, PROTOTYPING AND INFORMATIONAL PURPOSES ONLY CL 1.10 .043 REF 0.50 .020 REF "A" 1.32 .052 REF 19.50 .768 C C3-B-MV PART NUMBER QUANTITY MATERIAL 1 SUB-IM-C-299-01-S 18.000 PHOS BRONZE, 521 HARD TEMPER 2 SUB-IM-C-299-02-S 17.000 PHOS BRONZE, 521 HARD TEMPER 3 HT3-035-01-RA 1.0000 VECTRA E130i, COLOR: BLACK 4 WT-61-01-T 2.0000 PHOS BRONZE, 510 1/2 HARD 5 HT3-BC-035-01 1.0000 VECTRA E130i, COLOR: BLACK 'B' 8.75 .344 REF ROW D ROW C 1.32 .052 ROW B CPC FREQUENCY THIS SHEET ROW A A 'D' 1 C2, C3, B C1, C11, C14 2 20.44±0.08 .805±.003 (SEE NOTE 10) 4 C C14-B,I-OG 15 ITEM NO. C 4 D 4 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS[INCHES]. TOLERANCES ARE: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DECIMALS ANGLES MATERIAL: DO NOT SCALE DRAWING X.X: 0.3[.01] 2 X.XX: 0.13[.005] X.XXX: 0.051[.0020] INSULATOR: LCP CONTACT: PHOS BRONZE WT: PHOS BRONZE PLATING: CONTACT AREA: .000030 GOLD OVER .000050 NICKEL REMAINDER: .000200 REF TIN OVER .000050 NICKEL SHEET SCALE: 2:1 F:\DWG\SW\Newprod\Pt635mm\HyperTransport\ASP-149117-01.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: DWG. NO. 4 ROW 0.635mm SOCKET ASP-149117-01 BY: VICKY Z 12/10/2009 SHEET 1 OF 2 REVISION 4 4 C C12-B-CP 20.80 .819 (SEE NOTE 9) C C8-B,I-CP 19.80 .780 0.38 .015 REF 1.34 .053 REF C 4.50 .177 REF C4-F,I-MV +0.10 +.004 1.25 - 0.05 .049 - .002 (TYP) 6.63 .261 REF 3.49 .138 REF 4 SEE NOTE 8 20.44 .805 REF (SEE NOTE 10) 4 1.41 .055 (TYP) 2.30 .091 REF (TYP) 0.25 .010 REF 2.45 .096 REF 8.75 .344 REF 4 20.44 .805 REF (SEE NOTE 10) 4 8.05 .317 REF C C5-B-MV 8.17 .322 4 DETAIL 'D' SCALE 6 : 1 4 'C' 1.15±0.08 .045±.003 (SEE NOTE 10) C C13-B,I-OG 4 C C6-F-OG 0.15[.006] 4 SEE NOTE 7 DETAIL 'C' SCALE 8 : 1 CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE 4 IN-PROCESS INSPECTION INSPECT CODE B C1, C2, C4, C7, C8, C9, C10, C13, C14, C15 FILL WELD TABS C3, C5 FILL BACK CAP C12 C1, C2, C3, C4, C5, C6, C7, FINISHED ASSEMBLY C8, C9, C10, C11, C12, C13, C14, C15 4 DETAIL 'B' SCALE 6 : 1 SECTION "A"-"A" SCALE 4 : 1 ASSEMBLY OPERATION 0.635 .0250 (TYP) C C15-B,I-OG CPC FREQUENCY THIS SHEET A FILL WAFERS 4 C5, C8, C9, B C10, C12, C13, C15 C F:\DWG\SW\Newprod\Pt635mm\HyperTransport\ASP-149117-01.SLDDRW C 3.23 .127 C9-B,I-OG PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: DWG. NO. D F 4 0.05 .002 (SEE NOTE 3 & 7) C C7-B,I-MV C10-B,I-OG C 2.08 .082 C4, C6 4 ROW 0.635mm SOCKET ASP-149117-01 BY: VICKY Z 12/10/2009 SHEET 2 OF 2