REVISION C DO NOT SCALE FROM THIS PRINT NOTES: ANY REVISION CHANGES MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT 1. STANDARD PART SET UP AS ASP FOR HYPER TRANSPORT STANDARD 2. C REPRESENTS A CRITICAL DIMENSION. 3. NOTE DELETED. 4. MINIMUM PUSHOUT FORCE: .75 LB. 4. DIMENSION C12 MUST BE MEASURED IN ALL FOUR CORNERS USING INSPECTION FIXTURE AT-1817-836-1. USE CO-AU-WI-2003-M FOR PROCESS. 5. NOTE DELETED. 6. PARTS TO BE PACKAGED IN TAPE & REEL. ATTACH LABEL "SEAX-00001" TO EACH TAPE & REEL PACKAGE. 7. MAXIMUM ROW TO ROW VARIATION: .003[.08]. 2.229 56.62 REF (40 POS x .050[1.27]+.229[5.82]) .156 3.96 REF .0500 1.270 (TYP) C C .221 5.61 REF 1.9500 49.53 C .050 1.27 .161 4.09 REF C 1.003±.020 25.48±0.51 BY SIGNING THIS DOCUMENT YOU ARE ACCEPTING THE CONDITIONS SET WITHIN. YOUR REQUIREMENTS MUST BE LISTED WITHIN THIS DRAWING. WHERE NO DIRECTION FROM THE CUSTOMER IS IDENTIFIED SAMTEC'S PROCESS REQUIREMENTS WILL BE USED. .100 2.54 REF 3 .256 6.50 REF .018±.020 0.44±0.51 C 2.170 55.12 REF 'B' 1 .033 0.84 REF "A" .235 5.97 REF C .258 6.55 REF 2 .050 1.27 REF "A" .040 1.02 REF .050 1.27 (TYP) C 1.9500 49.530 C .044 1.12 REF EXCEPTIONS: .079 2.01 REF PHONE No: PRINTED NAME: CUSTOMER SIGNATURE: COMPANY: DATE: .034 0.86 REF .044 1.12 REF 2.1400 54.356 NON STANDARD COMPONENT DECIMALS PART NUMBER QUANTITY MATERIAL 1 SEAF-40-06.5-04-A 1.0000 LCP, UL 94 V0, COLOR: BLACK 2 NEW-SUB-C-209-06.5-L-2 160.00 COPPER ALLOY/LEAD FREE SOLDER 3 K-DOT-.256-.375-.005 1.0000 POLYIMIDE FILM 4 CT-SEAF053MS 1.0000 CONDUCTIVE POLYMER TOOLING 2 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 1:1 PLATING: CONTACT AREA: .000010 GOLD OVER .000050 NICKEL REMAINDER: .000200 TIN OVER .000050 NICKEL PROCESS PACKAGING OTHER ANGLES .XX: .01[.3] .XXX: .005[.13] .XXXX: .0020[.051] ASSEMBLY ITEM NO. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: LEAD FREE SOLDER X C c:\enterprisevault\DWG\MISC\MKTG\ASP-151798-03-06.5-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: .050 PI TCH SOCKET ARRAY ASSEMBLY DWG. NO. ASP-151798-03-06.5 BY: J. BROWNING 04/06/2010 SHEET 1 OF 2 REVISION C .630 16.00 REF 2.835 72.00 REF C .009[0.23] .011 0.28 REF .002±.003 0.06±0.08 (SEE NOTE 4 & 7) DETAIL 'B' SCALE 8 : 1 C "B" "B" C .035±.005 0.89±0.13 (TYP) .017 0.42 REF .035 0.90 REF USER DIRECTION OF UN-REELING POCKET NOT DETAILED 4 SECTION "B"-"B" SCALE 1.5 : 1 PACKAGING VIEW PROPRIETARY NOTE .0175±.0030 0.445±0.076 .050 1.27 REF (TYP) .0645 1.64 (TYP) .0530 1.35 .0470 1.194 .0355 0.902 THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 1:1 SECTION "A"-"A" SCALE 8 : 1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: .050 PI TCH SOCKET ARRAY ASSEMBLY DWG. NO. c:\enterprisevault\DWG\MISC\MKTG\ASP-151798-03-06.5-MKT.SLDDRW ASP-151798-03-06.5 BY: J. BROWNING 04/06/2010 SHEET 2 OF 2